Vlasa, A.;                     Bocanet, V.I.;                     Muntean, M.H.;                     Bud, A.;                     Dragomir, B.R.;                     Rosu, S.N.;                     Lazar, L.;                     Bud, E.    
        Accuracy of Three-Dimensional Printed Dental Models Based on Ethylene Di-Methacrylate-Stereolithography (SLA) vs. Digital Light Processing (DLP). Appl. Sci. 2023, 13, 2664.
    https://doi.org/10.3390/app13042664
    AMA Style
    
                                Vlasa A,                                 Bocanet VI,                                 Muntean MH,                                 Bud A,                                 Dragomir BR,                                 Rosu SN,                                 Lazar L,                                 Bud E.        
                Accuracy of Three-Dimensional Printed Dental Models Based on Ethylene Di-Methacrylate-Stereolithography (SLA) vs. Digital Light Processing (DLP). Applied Sciences. 2023; 13(4):2664.
        https://doi.org/10.3390/app13042664
    
    Chicago/Turabian Style
    
                                Vlasa, Alexandru,                                 Vlad I. Bocanet,                                 Mircea H. Muntean,                                 Anamaria Bud,                                 Bogdan Radu Dragomir,                                 Sorana Nicoleta Rosu,                                 Luminita Lazar,                                 and Eugen Bud.        
                2023. "Accuracy of Three-Dimensional Printed Dental Models Based on Ethylene Di-Methacrylate-Stereolithography (SLA) vs. Digital Light Processing (DLP)" Applied Sciences 13, no. 4: 2664.
        https://doi.org/10.3390/app13042664
    
    APA Style
    
                                Vlasa, A.,                                 Bocanet, V. I.,                                 Muntean, M. H.,                                 Bud, A.,                                 Dragomir, B. R.,                                 Rosu, S. N.,                                 Lazar, L.,                                 & Bud, E.        
        
        (2023). Accuracy of Three-Dimensional Printed Dental Models Based on Ethylene Di-Methacrylate-Stereolithography (SLA) vs. Digital Light Processing (DLP). Applied Sciences, 13(4), 2664.
        https://doi.org/10.3390/app13042664