Next Article in Journal
Method for 2D-3D Registration under Inverse Depth and Structural Semantic Constraints for Digital Twin City
Previous Article in Journal
Prediction of Elastic Modulus for Fibre-Reinforced Soil-Cement Mixtures: A Machine Learning Approach
 
 
Article
Peer-Review Record

Electro-Optic Sensor for Measuring Electrostatic Fields in the Frequency Domain

Appl. Sci. 2022, 12(17), 8544; https://doi.org/10.3390/app12178544
by Antonio Cristiano 1,*, Michal Krupa 1 and Richard Hill 2
Reviewer 1:
Reviewer 2: Anonymous
Appl. Sci. 2022, 12(17), 8544; https://doi.org/10.3390/app12178544
Submission received: 25 July 2022 / Revised: 17 August 2022 / Accepted: 25 August 2022 / Published: 26 August 2022
(This article belongs to the Special Issue Advances in Electro-Optical Engineering)

Round 1

Reviewer 1 Report


Comments for author File: Comments.docx

Author Response

Please see the attachment

Author Response File: Author Response.pdf

Reviewer 2 Report

In the manuscript entitled “Electro-optic sensor for measuring electrostatic fields in the frequency domain”, Cristiano et al. discuss an approach for electrostatic field measurements using electro-optic (EO) sensor. By arranging two EO sensors in a crossed-polarizers configuration, they demonstrated its capability to measure frequencies below 20 Hz. Theirs measurements are supported by an analytical model and associated simulations. After reading the manuscript, I found it is well-written. Both the experimental data and theoretical simulations seem convincing. Before recommendation, I would like the authors to address the follow points to further improve the quality of the manuscript.

 

1)     I find Fig. 11 and Fig. 13 confusing. What does each color represent? Shouldn't there be a color bar associated with this plot?

2)  More details should be added to the caption of Fig. 16, eg. the red circle, which is only explained in the main text but not in the figure caption.

3)     The dimensions or at least a scale bar should be included in Fig. 17.

4)     It’s a bit draw back that the authors provide no detailed information about the analytical model. As it’s a relatively simple system, some equations would be helpful to better understand/elaborate, eg. the scaling of H1/H2 powers as function of incident electric fields.

Author Response

Please see the attachment

Author Response File: Author Response.pdf

Round 2

Reviewer 1 Report

The authors have addressed the comments. This manuscript can be accepted for publication.

Back to TopTop