Analysis of Influence of Different Parameters on Numerical Simulation of NACA0012 Incompressible External Flow Field under High Reynolds Numbers

Currently, influence analysis of simulation parameters, especially the trailing edge shape and the corresponding modeling method on the force coefficients of NACA0012 under a high Reynolds number, is relatively sparse. In this paper, two trailing edge shapes are designed by three modeling methods and combined with three far-field distances to establish eighteen two-dimensional external flow fields. The same number of structured grids are generated by a unified grid strategy and the SST k-omega and the Spalart–Allmaras models are adopted to solve the NS equations to realize the numerical simulations. Unlike under low Reynolds numbers, the analysis results show that although the accuracy difference between the sharp trailing edge and the blunt trailing edge decreases as the attack angle range increases, the former is preferred in all studied ranges. As to the corresponding modeling methods, the NACA4 and the definition formula are preferred, the choice of which depends on the studied range. In particular, a greater number of data points adopted into the definition formula is not necessarily better. Considering the error ratios comprehensively, the simulation configurations of sharp trailing edge + 20 m far-field distance + SA/SST/SST/SST/SST/SA turbulence model obtains optimal simulation effects.