In the original publication [1], there was a misuse in Figure 2 as published, resulting in a discrepancy between the image and its description. The corrected Figure 2 appears below.
Figure 2.
Surface scan of the typical inclusions in the H13 steel. (a) R1, (b) R2, (c) R3, (d) R4, (e) R5.
Since the postcode of affiliation 1 in the original publication [1] was incorrect, it has been updated to “550025”.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Reference
- Liang, T.; Qin, Z.; Wang, L. Effect of Al2O3 on Inclusion Removal in H13 Steels Using High-Basicity LF (Ladle Furnace) Refining Slags. Metals 2023, 13, 1592. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2025 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).