Next Article in Journal
Optimization of a Solution Treatment in the Al-Cu-Mg-Ag Alloy via a Microstructural Investigation
Previous Article in Journal
Influence of the Structural-Phase State of a Copper Substrate upon Modification with Titanium Ions on the Thermal Cyclic Resistance of a Coating Based on Zr-Y-O
Previous Article in Special Issue
Investigation of the Technological Possibility of Laser Hardening of Stainless Steel 14Cr17Ni2 to a Deep Depth of the Surface
 
 

Order Article Reprints

Journal: Metals, 2022
Volume: 12
Number: 67

Article: Design, Simulation and Optimization of an Additive Laser-Based Manufacturing Process for Gearbox Housing with Reduced Weight Made from AlSi10Mg Alloy
Authors: by Liubov Magerramova, Vladimir Isakov, Liana Shcherbinina, Suren Gukasyan, Mikhail Petrov, Daniil Povalyukhin, Darya Volosevich and Olga Klimova-Korsmik
Link: https://www.mdpi.com/2075-4701/12/1/67

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop