Next Article in Journal
Effect of Alloying Additives and Microadditives on Hardenability Increase Caused by Action of Boron
Next Article in Special Issue
Microstructure and Magnetic Properties of Selected Laser Melted Ni-Mn-Ga and Ni-Mn-Ga-Fe Powders Derived from as Melt-Spun Ribbons Precursors
Previous Article in Journal
Microstructures and Properties of V-Modified A380 Aluminum Alloy Produced by High Pressure Rheo-Squeeze Casting with Compound Field Treatment
Previous Article in Special Issue
On Additive Manufactured AlSi10Mg to Wrought AA6060-T6: Characterisation of Optimal- and High-Energy Magnetic Pulse Welding Conditions
 
 

Order Article Reprints

Journal: Metals, 2021
Volume: 11
Number: 588

Article: Laser Defocusing Effect on the Microstructure and Defects of 17-4PH Parts Additively Manufactured by SLM at a Low Energy Input
Authors: by Paola Leo, Marcello Cabibbo, Antonio Del Prete, Sara Giganto, Susana Martínez-Pellitero and Joaquin Barreiro
Link: https://www.mdpi.com/2075-4701/11/4/588

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop