Next Article in Journal
Microstructure and Performance Analysis of Welded Joint of Spray-Deposited 2195 Al-Cu-Li Alloy Using GTAW
Next Article in Special Issue
Laser Defocusing Effect on the Microstructure and Defects of 17-4PH Parts Additively Manufactured by SLM at a Low Energy Input
Previous Article in Journal
Separation of the Formation Mechanisms of Residual Stresses in LPBF 316L
Previous Article in Special Issue
Gold–Silver Electroless Plating on Laser Powder-Bed Fusion Additively Printed AlSi10Mg Parts
 
 

Order Article Reprints

Journal: Metals, 2020
Volume: 10
Number: 1235

Article: On Additive Manufactured AlSi10Mg to Wrought AA6060-T6: Characterisation of Optimal- and High-Energy Magnetic Pulse Welding Conditions
Authors: by Moshe Nahmany, Victor Shribman, Shlomo Levi, Dana Ashkenazi and Adin Stern
Link: https://www.mdpi.com/2075-4701/10/9/1235

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop