Next Article in Journal
Liquid Crystal Polymer-Based Miniaturized Fully Implantable Deep Brain Stimulator
Next Article in Special Issue
Experimental Global Warming Potential-Weighted Specific Stiffness Comparison among Different Natural and Synthetic Fibers in a Composite Component Manufactured by Tailored Fiber Placement
Previous Article in Journal
Water Sorption in Hybrid Polyester/Glass/Jute Composites Processed via Compression Molding and Vacuum-Assisted Resin Transfer Molding
Previous Article in Special Issue
Development of New Hybrid Composites for High-Temperature Applications
 
 

Order Article Reprints

Journal: Polymers, 2023
Volume: 15
Number: 4437

Article: Influence of Processing Conditions on the Generation of Surface Defects in a Heat-and-Cool Hybrid Injection Molding Technique for Carbon Fiber-Reinforced Thermoplastic Sheets and Development of a Suitable Mold Heated by Far-Infrared Radiation
Authors: by Yasuhiko Murata, Ryunosuke Machiya and Takuma Komori
Link: https://www.mdpi.com/2073-4360/15/22/4437

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop