Next Article in Journal
Optimization of Injection-Molding Process for Thin-Walled Polypropylene Part Using Artificial Neural Network and Taguchi Techniques
Next Article in Special Issue
Ground Tire Rubber Modified by Elastomers via Low-Temperature Extrusion Process: Physico-Mechanical Properties and Volatile Organic Emission Assessment
Previous Article in Journal
A Simple Approach to Control the Physical and Chemical Features of Custom-Synthesized N-Doped Carbon Nanotubes and the Extent of Their Network Formation in Polymers: The Importance of Catalyst to Substrate Ratio
 
 
Article

Article Versions Notes

Polymers 2021, 13(23), 4157; https://doi.org/10.3390/polym13234157
Action Date Notes Link
article pdf uploaded. 28 November 2021 09:35 CET Version of Record https://www.mdpi.com/2073-4360/13/23/4157/pdf-vor
article supplementary file uploaded. 28 November 2021 09:35 CET - https://www.mdpi.com/2073-4360/13/23/4157#supplementary
article pdf uploaded. 28 November 2021 09:39 CET Updated version of record https://www.mdpi.com/2073-4360/13/23/4157/pdf-vor
article xml file uploaded 29 November 2021 08:10 CET Original file -
article xml uploaded. 29 November 2021 08:10 CET Update -
article pdf uploaded. 29 November 2021 08:10 CET Updated version of record https://www.mdpi.com/2073-4360/13/23/4157/pdf-vor
article html file updated 29 November 2021 08:12 CET Original file -
article xml file uploaded 3 December 2021 02:04 CET Update -
article xml uploaded. 3 December 2021 02:04 CET Update https://www.mdpi.com/2073-4360/13/23/4157/xml
article pdf uploaded. 3 December 2021 02:04 CET Updated version of record https://www.mdpi.com/2073-4360/13/23/4157/pdf
article html file updated 3 December 2021 02:07 CET Update -
article html file updated 30 July 2022 19:16 CEST Update https://www.mdpi.com/2073-4360/13/23/4157/html
Back to TopTop