Next Article in Journal
Novel Activated Carbon Nanofibers Composited with Cost-Effective Graphene-Based Materials for Enhanced Adsorption Performance toward Methane
Next Article in Special Issue
An Analysis of the Casting Polymer Mold Wear Manufactured Using PolyJet Method Based on the Measurement of the Surface Topography
Previous Article in Journal
Mechanical and Optical Properties of Thermochromic Reversible Waterborne Primer Film on Tilia europaea with 1,2-Benzo-6-diethylaminofluorane Based Microcapsules
Previous Article in Special Issue
New Procedure for BIM Characterization of Architectural Models Manufactured Using Fused Deposition Modeling and Plastic Materials in 4.0 Advanced Construction Environments
 
 

Order Article Reprints

Journal: Polymers, 2020
Volume: 12
Number: 2063

Article: Modeling the Adhesion Bonding Strength in Injection Overmolding of Polypropylene Parts
Authors: by Ruggero Giusti and Giovanni Lucchetta
Link: https://www.mdpi.com/2073-4360/12/9/2063

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop