Next Article in Journal
SiO2 NPs-PQ/PMMA Photopolymer Material Doped with a High-Concentration Photosensitizer for Holographic Storage
Next Article in Special Issue
Rheological Study of Gelation and Crosslinking in Chemical Modified Polyamide 12 Using a Multiwave Technique
Previous Article in Journal
Cellulose Nanofibers Isolated from the Cuscuta Reflexa Plant as a Green Reinforcement of Natural Rubber
Previous Article in Special Issue
Synthesis and Investigation of Thermo-Induced Gelation of Partially Cross-Linked Poly-2-isopropyl-2-oxazoline in Aqueous Media
 
 
Article
Peer-Review Record

Compositions Based on PAN Solutions Containing Polydimethylsiloxane Additives: Morphology, Rheology, and Fiber Spinning

Polymers 2020, 12(4), 815; https://doi.org/10.3390/polym12040815
by Valery G. Kulichikhin *, Ivan Y. Skvortsov and Lydia A. Varfolomeeva
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Polymers 2020, 12(4), 815; https://doi.org/10.3390/polym12040815
Submission received: 19 March 2020 / Revised: 31 March 2020 / Accepted: 31 March 2020 / Published: 4 April 2020
(This article belongs to the Special Issue Polymer Rheology: Fundamentals and Applications)

Round 1

Reviewer 1 Report

The paper « Compositions based on PAN solutions containing polydimethylsiloxanes additives: morphology, rheology, fiber spinning” by Kulichikhin et al. investigates the effect of several PDMS with various molecular weights on the morphology and rheological behavior of PAN solutions in DMSO.

The paper is clear and the conclusions are supported by the results. However, the manuscript must be checked by a native English speaker. Also, the authors must answer to the following questions:

  1. Page 3: line 100: which agitation regime was used?!
  2. Fig 10 and 11. Which technique was used for these figures?!
  3. The authors must discuss the stabilization mechanism of the emulsions and also to add some data about the static and dynamic stability of emulsions. For the dynamic stability it is possible to carry out some rheology tests at a constant shear rate as a function of time. See: https://doi.org/10.1016/j.colsurfa.2014.10.026
  4. Also concerning the rheology tests the authors should have used the following procedure: prior to all measurements, the samples must be treated at a shear rate of 50/s for 30 s and equilibrated for 2 min at 20 °C in order to standardize their history.
  5. Line 258-259: The authors state that the structure and dimensions of the interface affect the emulsions. In this context, the authors must explain the structure of the interface and how they measure this interface.
  6. The coalescence of the emulsions appears after which time?! If the authors observed a coalescence, then it means that the emulsions were destroyed.

Minor corrections:

  1. Line 20 : ratio of the disperse phase and the continuous medium…
  2. Page 1: lines 33-39: some review references need to be added
  3. Page 4, line: 139: the authors must indicate exactly which apparatus was used and not only to indicate the reference
  4. Page8, lines 261-264: the sentence: “if the stage…in the volume.” is not very clear.
  5. Shell-core or skin-core fibers?! The authors must be homogeneous within all the paper

In view of the above, I recommend the publication of this paper in Polymers only after major revisions.

Author Response

Please, see attachment. 

Author Response File: Author Response.docx

Reviewer 2 Report

The work by Kulichikhin et al. presents an interesting analyisis analysis of the compatibilization of polyacrylonitrile and polydimethylsiloxanes. The work is systematic and the results are physically sound.

My very minor comment is that authors should include a brief summary of the different samples studies and their type. A Table including the compositios will be useful.

Author Response

Please, see the attachment.

Author Response File: Author Response.docx

Round 2

Reviewer 1 Report

The authors have made all the suggested corrections and therefore the manuscript can be published as it is.

Back to TopTop