Next Article in Journal
Development of Temperature Control Solutions for Non-Instrumented Nucleic Acid Amplification Tests (NINAAT)
Next Article in Special Issue
3D Finite Element Simulation of Micro End-Milling by Considering the Effect of Tool Run-Out
Previous Article in Journal
Correction: Liu, W. et al. A Highly Sensitive Humidity Sensor Based on Ultrahigh-Frequency Microelectromechanical Resonator Coated with Nano-Assembled Polyelectrolyte Thin Films. Micromachines, 2017, 8, 116
Previous Article in Special Issue
Slurry Injection Schemes on the Extent of Slurry Mixing and Availability during Chemical Mechanical Planarization
 
 

Order Article Reprints

Journal: Micromachines, 2017
Volume: 8
Number: 179

Article: Fabrication of Functional Plastic Parts Using Nanostructured Steel Mold Inserts
Authors: by Nicolas Blondiaux, Raphaël Pugin, Gaëlle Andreatta, Lionel Tenchine, Stéphane Dessors, Pierre-François Chauvy, Matthieu Diserens and Philippe Vuillermoz
Link: https://www.mdpi.com/2072-666X/8/6/179

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop