Next Article in Journal
Model of Quality Factor for (111) 3C-SiC Double-Clamped Beams
Next Article in Special Issue
The Influence of Contour Form Geometric Features and the Number of Cutting Passes on the Surface Quality Characteristics and Critical Points of Cutting Tools Fabricated by Wire Electrical Discharge Machining (WEDM)
Previous Article in Journal
Reversibly Alterable Hot-Electron Photodetection Without Altering Working Wavelengths Through Phase-Change Material Sb2S3
Previous Article in Special Issue
High-Efficiency Precision Polishing Using Fiber Brush–Shear-Thickening Fluid Composites
 
 
Article

Article Versions Notes

Micromachines 2025, 16(2), 147; https://doi.org/10.3390/mi16020147
Action Date Notes Link
article pdf uploaded. 26 January 2025 12:14 CET Version of Record https://www.mdpi.com/2072-666X/16/2/147/pdf-vor
article xml file uploaded 7 February 2025 09:47 CET Original file -
article xml uploaded. 7 February 2025 09:47 CET Update https://www.mdpi.com/2072-666X/16/2/147/xml
article pdf uploaded. 7 February 2025 09:47 CET Updated version of record https://www.mdpi.com/2072-666X/16/2/147/pdf
article html file updated 7 February 2025 09:49 CET Original file https://www.mdpi.com/2072-666X/16/2/147/html
Back to TopTop