Order Article Reprints

M’Bengue M-S, Mesnard T, Chai F, Maton M, Gaucher V, Tabary N, García-Fernandez M-J, Sobocinski J, Martel B, Blanchemain N. Evaluation of a Medical Grade Thermoplastic Polyurethane for the Manufacture of an Implantable Medical Device: The Impact of FDM 3D-Printing and Gamma Sterilization. Pharmaceutics. 2023; 15(2):456. https://doi.org/10.3390/pharmaceutics15020456

M’Bengue, Marie-Stella, Thomas Mesnard, Feng Chai, Mickaël Maton, Valérie Gaucher, Nicolas Tabary, Maria-José García-Fernandez, Jonathan Sobocinski, Bernard Martel, and Nicolas Blanchemain. 2023. "Evaluation of a Medical Grade Thermoplastic Polyurethane for the Manufacture of an Implantable Medical Device: The Impact of FDM 3D-Printing and Gamma Sterilization" Pharmaceutics 15, no. 2: 456. https://doi.org/10.3390/pharmaceutics15020456

M’Bengue, M.-S., Mesnard, T., Chai, F., Maton, M., Gaucher, V., Tabary, N., García-Fernandez, M.-J., Sobocinski, J., Martel, B., & Blanchemain, N. (2023). Evaluation of a Medical Grade Thermoplastic Polyurethane for the Manufacture of an Implantable Medical Device: The Impact of FDM 3D-Printing and Gamma Sterilization. Pharmaceutics, 15(2), 456. https://doi.org/10.3390/pharmaceutics15020456