Next Article in Journal
Effects of Climate Change and Ozone Concentration on the Net Primary Productivity of Forests in South Korea
Next Article in Special Issue
Treatment of Picea abies and Pinus sylvestris Stumps with Urea and Phlebiopsis gigantea for Control of Heterobasidion
Previous Article in Journal
Effect of Wind on the Relation of Leaf N, P Stoichiometry with Leaf Morphology in Quercus Species
Previous Article in Special Issue
Monitoring Cable Tensile Forces of Winch-Assist Harvester and Forwarder Operations in Steep Terrain
Article Menu
Issue 3 (March) cover image

Export Article

Open AccessFeature PaperArticle
Forests 2018, 9(3), 111; https://doi.org/10.3390/f9030111

Postural Risk Assessment of Small-Scale Debarkers for Wooden Post Production

1
CNR Ivalsa, Via Madonna del Piano 10, 50019 Sesto Fiorentino FI, Italy
2
Australian Forest Operations Research Alliance (AFORA), University of the Sunshine Coast, Locked Bag 4, Maroochydore DC, QLD 4558, Australia
*
Author to whom correspondence should be addressed.
Received: 20 January 2018 / Revised: 25 February 2018 / Accepted: 28 February 2018 / Published: 2 March 2018
(This article belongs to the Special Issue Forest Operations, Engineering and Management)
Full-Text   |   PDF [1817 KB, uploaded 2 March 2018]   |  

Abstract

The study sampled six representative work sites in Northern and Central Italy, in order to assess the risk for developing musculo-skeletal disease due to poor work posture (postural risk) among the operators engaged in semi-mechanized post debarking operations. Assessment was conducted with the Ovako Working posture Analysis System (OWAS) on 1200 still frames randomly extracted from videotaped work samples. The postural risk associated with post debarking was relatively low, and varied with individual operations based on their specific set up. Postural risk was higher for the loading station compared with the unloading station, which makes a strong argument for job rotation. The study suggested that the infeed chute of small-scale debarkers might be too basic and should be further developed, in order to reduce postural risk. Obviously, better machine design should be part of an articulate strategy aimed at decreasing the postural risk and based on proper worksite organization and specific worker training. View Full-Text
Keywords: WMSD; OWAS; ergonomics; safety; logging WMSD; OWAS; ergonomics; safety; logging
Figures

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
SciFeed
Printed Edition Available!
A printed edition of this Special Issue is available here.

Share & Cite This Article

MDPI and ACS Style

Spinelli, R.; Aminti, G.; Magagnotti, N.; De Francesco, F. Postural Risk Assessment of Small-Scale Debarkers for Wooden Post Production. Forests 2018, 9, 111.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Forests EISSN 1999-4907 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top