Next Article in Journal
Prediction of the Vickers Microhardness and Ultimate Tensile Strength of AA5754 H111 Friction Stir Welding Butt Joints Using Artificial Neural Network
Next Article in Special Issue
Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering
Previous Article in Journal
The Effect of Cu:Ag Atomic Ratio on the Properties of Sputtered Cu–Ag Alloy Thin Films
Previous Article in Special Issue
Additive Manufacturing of Biomedical Constructs with Biomimetic Structural Organizations
Open AccessCorrection

Correction: 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials 2016, 9, 802

1
Department of Tissue Engineering, Center of 3D Printing & Organ Manufacturing, School of Fundamental Sciences, China Medical University (CMU), No. 77 Puhe Road, Shenyang North New Area, Shenyang 110122, China
2
Department of Mechanical Engineering, Tsinghua University, Center of Organ Manufacturing, Beijing 100084, China
*
Author to whom correspondence should be addressed.
Academic Editor: Chee Kai Chua
Materials 2016, 9(11), 911; https://doi.org/10.3390/ma9110911
Received: 7 November 2016 / Revised: 7 November 2016 / Accepted: 8 November 2016 / Published: 10 November 2016
(This article belongs to the Special Issue 3D Printing for Biomedical Engineering)
No abstract available
View Full-Text
MDPI and ACS Style

Wang, X.; Ao, Q.; Tian, X.; Fan, J.; Wei, Y.; Hou, W.; Tong, H.; Bai, S. Correction: 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials 2016, 9, 802. Materials 2016, 9, 911.

Show more citation formats Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop