Next Article in Journal
Effects of Erosion Forms and Admixture on Cement Deterioration Characteristics in Sulfate Environment
Previous Article in Journal
Heat Treatment Effects on Laser Powder Bed Fused CuNi2.5SiCr Alloy: Microstructure, Hardness, Electrical, and Thermal Conductivity
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Zhang et al. Free and Transient Vibration Analysis of Sandwich Piezoelectric Laminated Beam with General Boundary Conditions. Materials 2026, 19, 136

1
China Ordnance Industry Group Aviation Ammunition Research Institute Co., Ltd., China North Industries Group Corporation Limited, Harbin 150030, China
2
College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China
3
College of Mechanical & Energy Engineering, Beijing University of Technology, Beijing 100124, China
*
Author to whom correspondence should be addressed.
These authors contributed equally to this work.
Materials 2026, 19(5), 884; https://doi.org/10.3390/ma19050884
Submission received: 5 February 2026 / Accepted: 12 February 2026 / Published: 27 February 2026
Additional Affiliation
In the original publication [1], there was an error regarding the affiliations of Xiaoshuai Zhang. In addition to the current affiliation, they should also be marked with affiliation 2.
Citation Correction
In the original publication [1], reference 25 was incorrectly attributed to (“Chu, Z.; Wang, R.; Tian, S.; Wang, C.; Wu, L.; Wu, Q.; Yu, G. Fabrication and failure mechanisms of ultralight all-CFRP sandwich cylinders under axial compression. Compos. Struct. 2024, 345, 118386.”). The citation has now been corrected as follows:
25. Tornabene, F.; Viscoti, M.; Dimitri, R. Effect of thermal and electric coupling on the multifield response of laminated shell structures employing higher-order theories. Compos. Struct. 2025, 354, 118801.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Zhang, X.; Fu, W.; Ning, Z.; Sun, N.; Li, Y.; Yang, Z.; Jiu, S. Free and Transient Vibration Analysis of Sandwich Piezoelectric Laminated Beam with General Boundary Conditions. Materials 2026, 19, 136. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Zhang, X.; Fu, W.; Ning, Z.; Sun, N.; Li, Y.; Yang, Z.; Jiu, S. Correction: Zhang et al. Free and Transient Vibration Analysis of Sandwich Piezoelectric Laminated Beam with General Boundary Conditions. Materials 2026, 19, 136. Materials 2026, 19, 884. https://doi.org/10.3390/ma19050884

AMA Style

Zhang X, Fu W, Ning Z, Sun N, Li Y, Yang Z, Jiu S. Correction: Zhang et al. Free and Transient Vibration Analysis of Sandwich Piezoelectric Laminated Beam with General Boundary Conditions. Materials 2026, 19, 136. Materials. 2026; 19(5):884. https://doi.org/10.3390/ma19050884

Chicago/Turabian Style

Zhang, Xiaoshuai, Wei Fu, Zixin Ning, Ningze Sun, Yang Li, Ziyuan Yang, and Sen Jiu. 2026. "Correction: Zhang et al. Free and Transient Vibration Analysis of Sandwich Piezoelectric Laminated Beam with General Boundary Conditions. Materials 2026, 19, 136" Materials 19, no. 5: 884. https://doi.org/10.3390/ma19050884

APA Style

Zhang, X., Fu, W., Ning, Z., Sun, N., Li, Y., Yang, Z., & Jiu, S. (2026). Correction: Zhang et al. Free and Transient Vibration Analysis of Sandwich Piezoelectric Laminated Beam with General Boundary Conditions. Materials 2026, 19, 136. Materials, 19(5), 884. https://doi.org/10.3390/ma19050884

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop