Next Article in Journal
Poly(vinyl chloride) Plastisol Composites with Surface-Modified Wood Flour as Potential Coating and Insulating Materials for Modern Energy-Efficient Constructions
Previous Article in Journal
Stress Corrosion Cracking (SCC) Resistance of the AW-5083 Alloy with a Plasma Electrolytic Oxidation (PEO) Coating in the Presence of Chloride (Cl)
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Ryan Murphy et al. Investigating the Effect of Wire Drawing and Heat Treatment on the Response of Ni50.9Ti49.1 R-Phase Actuators. Materials 2025, 18, 4931

by
Josephine Ryan Murphy
1,2,3,*,
Muhannad Ahmed Obeidi
1,2,3,
Inam Ul Ahad
1,2,3 and
Dermot Brabazon
1,2,3
1
School of Mechanical and Manufacturing Engineering, Dublin City University, 9 Dublin, Ireland
2
I-Form Advanced Manufacturing Centre Research, Dublin City University, 9 Dublin, Ireland
3
Advanced Metallic Systems Centre for Doctoral Training, School of Mechanical & Manufacturing Engineering, Dublin City University, 9 Dublin, Ireland
*
Author to whom correspondence should be addressed.
Materials 2026, 19(1), 40; https://doi.org/10.3390/ma19010040
Submission received: 15 December 2025 / Accepted: 17 December 2025 / Published: 22 December 2025
In the original publication [1], there were errors regarding the affiliations 2 and 3. The corrected affiliations should be as follows:
2
I-Form Advanced Manufacturing Centre Research, Dublin City University, 9 Dublin, Ireland
3
Advanced Metallic Systems Centre for Doctoral Training, School of Mechanical & Manufacturing Engineering, Dublin City University, 9 Dublin, Ireland
Additionally, the authors Muhannad Ahmed Obeidi, Inam Ul Ahad and Dermot Brabazon should also be marked with affiliation 3.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Ryan Murphy, J.; Obeidi, M.A.; Ahad, I.U.; Brabazon, D. Investigating the Effect of Wire Drawing and Heat Treatment on the Response of Ni50.9Ti49.1 R-Phase Actuators. Materials 2025, 18, 4931. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Ryan Murphy, J.; Obeidi, M.A.; Ahad, I.U.; Brabazon, D. Correction: Ryan Murphy et al. Investigating the Effect of Wire Drawing and Heat Treatment on the Response of Ni50.9Ti49.1 R-Phase Actuators. Materials 2025, 18, 4931. Materials 2026, 19, 40. https://doi.org/10.3390/ma19010040

AMA Style

Ryan Murphy J, Obeidi MA, Ahad IU, Brabazon D. Correction: Ryan Murphy et al. Investigating the Effect of Wire Drawing and Heat Treatment on the Response of Ni50.9Ti49.1 R-Phase Actuators. Materials 2025, 18, 4931. Materials. 2026; 19(1):40. https://doi.org/10.3390/ma19010040

Chicago/Turabian Style

Ryan Murphy, Josephine, Muhannad Ahmed Obeidi, Inam Ul Ahad, and Dermot Brabazon. 2026. "Correction: Ryan Murphy et al. Investigating the Effect of Wire Drawing and Heat Treatment on the Response of Ni50.9Ti49.1 R-Phase Actuators. Materials 2025, 18, 4931" Materials 19, no. 1: 40. https://doi.org/10.3390/ma19010040

APA Style

Ryan Murphy, J., Obeidi, M. A., Ahad, I. U., & Brabazon, D. (2026). Correction: Ryan Murphy et al. Investigating the Effect of Wire Drawing and Heat Treatment on the Response of Ni50.9Ti49.1 R-Phase Actuators. Materials 2025, 18, 4931. Materials, 19(1), 40. https://doi.org/10.3390/ma19010040

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop