Javierre, C.; Camañes, V.; Vidal, J.; Dieste, J.A.; Fernandez, A.
Redesign of a Flange Wheel Used in an Airplane for Composite Manufacturing Made with a Mold with Removable Inserts Manufactured by Means of 3D Printing: A Comparison with the Current Conventional Alternative, a Turbine Wheel Machined out of Aluminum. Materials 2025, 18, 1296.
https://doi.org/10.3390/ma18061296
AMA Style
Javierre C, Camañes V, Vidal J, Dieste JA, Fernandez A.
Redesign of a Flange Wheel Used in an Airplane for Composite Manufacturing Made with a Mold with Removable Inserts Manufactured by Means of 3D Printing: A Comparison with the Current Conventional Alternative, a Turbine Wheel Machined out of Aluminum. Materials. 2025; 18(6):1296.
https://doi.org/10.3390/ma18061296
Chicago/Turabian Style
Javierre, Carlos, VÃctor Camañes, Julio Vidal, José Antonio Dieste, and Angel Fernandez.
2025. "Redesign of a Flange Wheel Used in an Airplane for Composite Manufacturing Made with a Mold with Removable Inserts Manufactured by Means of 3D Printing: A Comparison with the Current Conventional Alternative, a Turbine Wheel Machined out of Aluminum" Materials 18, no. 6: 1296.
https://doi.org/10.3390/ma18061296
APA Style
Javierre, C., Camañes, V., Vidal, J., Dieste, J. A., & Fernandez, A.
(2025). Redesign of a Flange Wheel Used in an Airplane for Composite Manufacturing Made with a Mold with Removable Inserts Manufactured by Means of 3D Printing: A Comparison with the Current Conventional Alternative, a Turbine Wheel Machined out of Aluminum. Materials, 18(6), 1296.
https://doi.org/10.3390/ma18061296
