Next Article in Journal
Preparation of Low-Salt-Rejection Membrane by Sodium Hypochlorite Chlorination for Concentration of Low-Concentration Magnesium Chloride Solution
Previous Article in Journal
On Predicting Optimal Structural Topologies in the Presence of Random Loads
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Retraction

RETRACTED: Thiyagarajan, J.S. Non-Destructive Testing Mechanism for Pre-Stressed Steel Wire Using Acoustic Emission Monitoring. Materials 2020, 13, 5029

by
Jothi Saravanan Thiyagarajan
School of Infrastructure, Indian Institute of Technology Bhubaneswar, Argul-Jatni Rd, Kansapada, Odisha 752050, India
Materials 2025, 18(12), 2812; https://doi.org/10.3390/ma18122812
Submission received: 2 November 2023 / Accepted: 6 June 2025 / Published: 16 June 2025
The journal retracts the article “Non-Destructive Testing Mechanism for Pre-Stressed Steel Wire Using Acoustic Emission Monitoring” [1], cited above.
Following publication, concerns were brought to the attention of the publisher regarding an overlap between this paper [1] and an early thesis [2], published in another language by a different author.
Adhering to our complaints procedure, an investigation was conducted by the Editorial Office and Editorial Board that confirmed a significant overlap without appropriate acknowledgement or citation. As a result, the Materials Editorial Office and Editorial Board have decided to retract [1] this paper as per MDPI’s retraction policy (https://www.mdpi.com/ethics#_bookmark30, accessed on 1 November 2023).
This retraction was approved by the Editor-in-Chief of the journal Materials.
The author did not provide a comment on this decision.

References

  1. Thiyagarajan, J.S. RETRACTED: Non-Destructive Testing Mechanism for Pre-Stressed Steel Wire Using Acoustic Emission Monitoring. Materials 2020, 13, 5029. [Google Scholar] [CrossRef]
  2. Yang, Y. Analyses on Acoustic Emission Wave Propagation in a Stay Cable by Using Semi Analytical FE; Tongji University: Shanghai, China, 2017. [Google Scholar]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Thiyagarajan, J.S. RETRACTED: Thiyagarajan, J.S. Non-Destructive Testing Mechanism for Pre-Stressed Steel Wire Using Acoustic Emission Monitoring. Materials 2020, 13, 5029. Materials 2025, 18, 2812. https://doi.org/10.3390/ma18122812

AMA Style

Thiyagarajan JS. RETRACTED: Thiyagarajan, J.S. Non-Destructive Testing Mechanism for Pre-Stressed Steel Wire Using Acoustic Emission Monitoring. Materials 2020, 13, 5029. Materials. 2025; 18(12):2812. https://doi.org/10.3390/ma18122812

Chicago/Turabian Style

Thiyagarajan, Jothi Saravanan. 2025. "RETRACTED: Thiyagarajan, J.S. Non-Destructive Testing Mechanism for Pre-Stressed Steel Wire Using Acoustic Emission Monitoring. Materials 2020, 13, 5029" Materials 18, no. 12: 2812. https://doi.org/10.3390/ma18122812

APA Style

Thiyagarajan, J. S. (2025). RETRACTED: Thiyagarajan, J.S. Non-Destructive Testing Mechanism for Pre-Stressed Steel Wire Using Acoustic Emission Monitoring. Materials 2020, 13, 5029. Materials, 18(12), 2812. https://doi.org/10.3390/ma18122812

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop