Tribst, J.P.M.; Hosseini, F.; Pilecco, R.O.; Serrano, C.M.; Kleverlaan, C.J.; Dal Piva, A.M.d.O.
The Influence of Extra-Fine Milling Protocol on the Internal Fit of CAD/CAM Composite and Ceramic Crowns. Materials 2024, 17, 5601.
https://doi.org/10.3390/ma17225601
AMA Style
Tribst JPM, Hosseini F, Pilecco RO, Serrano CM, Kleverlaan CJ, Dal Piva AMdO.
The Influence of Extra-Fine Milling Protocol on the Internal Fit of CAD/CAM Composite and Ceramic Crowns. Materials. 2024; 17(22):5601.
https://doi.org/10.3390/ma17225601
Chicago/Turabian Style
Tribst, João Paulo Mendes, Fatema Hosseini, Rafaela Oliveira Pilecco, Carlos Manuel Serrano, Cornelis Johannes Kleverlaan, and Amanda Maria de Oliveira Dal Piva.
2024. "The Influence of Extra-Fine Milling Protocol on the Internal Fit of CAD/CAM Composite and Ceramic Crowns" Materials 17, no. 22: 5601.
https://doi.org/10.3390/ma17225601
APA Style
Tribst, J. P. M., Hosseini, F., Pilecco, R. O., Serrano, C. M., Kleverlaan, C. J., & Dal Piva, A. M. d. O.
(2024). The Influence of Extra-Fine Milling Protocol on the Internal Fit of CAD/CAM Composite and Ceramic Crowns. Materials, 17(22), 5601.
https://doi.org/10.3390/ma17225601
