Next Article in Journal
Experimental Study on Mechanical and Damage Evolution Characteristics of Coal during True Triaxial Cyclic Loading and Unloading
Next Article in Special Issue
Assessment of Ferritic ODS Steels Obtained by Laser Additive Manufacturing
Previous Article in Journal
Investigating the Efficiency of a Heat Recovery–Storage System Using Heat Pipes and Phase Change Materials
Previous Article in Special Issue
Investigation on the Microstructure and Mechanical Properties of the Ti-Ta Alloy with Unmelted Ta Particles by Laser Powder Bed Fusion
 
 

Order Article Reprints

Journal: Materials, 2023
Volume: 16
Number: 2383

Article: Investigation into the Microstructure and Hardness of Additively Manufactured (3D-Printed) Inconel 718 Alloy
Authors: by Abdulaziz Kurdi, Abdelhakim Aldoshan, Fahad Alshabouna, Abdulaziz Alodadi, Ahmed Degnah, Husain Alnaser, Thamer Tabbakh and Animesh Kumar Basak
Link: https://www.mdpi.com/1996-1944/16/6/2383

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop