Next Article in Journal
Correction: Shi et al. Effect of Final Rolling Temperature on Microstructures and Mechanical Properties of AZ31 Alloy Sheets Prepared by Equal Channel Angular Rolling and Continuous Bending. Materials 2020, 13, 3346
Next Article in Special Issue
Microstructural and Tribological Characteristics of Composites Obtained by Detonation Spraying of Iron-Based Alloy—Carbide Powder Mixtures
Previous Article in Journal
Aluminium Matrix Composites Reinforced with AlCrFeMnNi HEA Particulates: Microstructure, Mechanical and Corrosion Properties
Previous Article in Special Issue
An Investigation into the Potential of Turning Induced Deformation Technique for Developing Porous Magnesium and Mg-SiO2 Nanocomposite
 
 

Order Article Reprints

Journal: Materials, 2023
Volume: 16
Number: 5492

Article: Microstructure and Mechanical Properties of Low-Cost SiC-Reinforced Aluminum and Al4Cu Matrix Composites Produced by Sintering in Vacuum
Authors: by Anna Wąsik, Beata Leszczyńska-Madej, Marcin Madej and Marcin Goły
Link: https://www.mdpi.com/1996-1944/16/15/5492

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop