Article Versions Notes

Addugala H, Venugopal VN, Rengasamy S, Yadalam PK, Albar NH, Alamoudi A, Bahammam SA, Zidane B, Bahammam HA, Bhandi S, et al. Marginal and Internal Gap of Metal Copings Fabricated Using Three Types of Resin Patterns with Subtractive and Additive Technology: An In Vitro Comparison. Materials. 2022; 15(18):6397. https://doi.org/10.3390/ma15186397

Addugala, Hemavardhini, Vidyashree Nandini Venugopal, Surya Rengasamy, Pradeep Kumar Yadalam, Nassreen H. Albar, Ahmed Alamoudi, Sarah Ahmed Bahammam, Bassam Zidane, Hammam Ahmed Bahammam, Shilpa Bhandi, and et al. 2022. "Marginal and Internal Gap of Metal Copings Fabricated Using Three Types of Resin Patterns with Subtractive and Additive Technology: An In Vitro Comparison" Materials 15, no. 18: 6397. https://doi.org/10.3390/ma15186397

Addugala, H., Venugopal, V. N., Rengasamy, S., Yadalam, P. K., Albar, N. H., Alamoudi, A., Bahammam, S. A., Zidane, B., Bahammam, H. A., Bhandi, S., Shrivastava, D., Srivastava, K. C., & Patil, S. (2022). Marginal and Internal Gap of Metal Copings Fabricated Using Three Types of Resin Patterns with Subtractive and Additive Technology: An In Vitro Comparison. Materials, 15(18), 6397. https://doi.org/10.3390/ma15186397