Next Article in Journal
Extraction of Alkalis from Silicate Materials PART 2—Crystalline Silicate Materials
Next Article in Special Issue
Influence of the Geometrical Features of the Cutting Edges of Abrasive Grains on the Removal Efficiency of the Ti6Al4V Titanium Alloy
Previous Article in Journal
Research on the General Failure Law of a CTRC Column by Modeling FEM Output Data
Previous Article in Special Issue
Probabilistic Aspects of Modeling and Analysis of Grinding Wheel Wear
 
 

Order Article Reprints

Journal: Materials, 2022
Volume: 15
Number: 6057

Article: Residual Stress Build-Up in Aluminum Parts Fabricated with SLM Technology Using the Bridge Curvature Method
Authors: by Quoc-Phu Ma, Jakub Mesicek, Frantisek Fojtik, Jiri Hajnys, Pavel Krpec, Marek Pagac and Jana Petru
Link: https://www.mdpi.com/1996-1944/15/17/6057

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop