Next Article in Journal
Influence of Tool Geometry and Process Parameters on Torque, Temperature, and Quality of Friction Stir Welds in Dissimilar Al Alloys
Next Article in Special Issue
Analysis of the Quality of Sulfomolybdenum Coatings Obtained by Electrospark Alloying Methods
Previous Article in Journal
Annealing Effect on the Characteristics of Co40Fe40W10B10 Thin Films on Si(100) Substrate
 
 

Order Article Reprints

Journal: Materials, 2021
Volume: 14
Number: 6018

Article: The Applicability of Die Cast A356 Alloy to Additive Friction Stir Deposition at Various Feeding Speeds
Authors: by Bandar Alzahrani, Mohamed M. El-Sayed Seleman, Mohamed M. Z. Ahmed, Ebtessam Elfishawy, Adham M. Z. Ahmed, Kamel Touileb, Nabil Jouini and Mohamed I. A. Habba
Link: https://www.mdpi.com/1996-1944/14/20/6018

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop