Next Article in Journal
Distribution of Salmonella Serovars in Humans, Foods, Farm Animals and Environment, Companion and Wildlife Animals in Singapore
Next Article in Special Issue
Hazard Recognition Patterns Demonstrated by Construction Workers
Previous Article in Journal
Profiles on the Orientation Discrimination Processing of Human Faces
Previous Article in Special Issue
Risk Assessment of High-Speed Rail Projects: A Risk Coupling Model Based on System Dynamics
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Quantitative Assessment of the State of Threat of Working on Construction Scaffolding

Department of Building Engineering, Faculty of Civil Engineering, Wroclaw University of Science and Technology, 27 Wybrzeże Wyspiańskiego st., 50-370 Wrocław, Poland
*
Author to whom correspondence should be addressed.
Int. J. Environ. Res. Public Health 2020, 17(16), 5773; https://doi.org/10.3390/ijerph17165773
Submission received: 24 June 2020 / Revised: 20 July 2020 / Accepted: 7 August 2020 / Published: 10 August 2020
(This article belongs to the Special Issue Occupational Safety and Risks in Construction)

Abstract

Working at height, and especially on construction scaffolding, is one of the most accident-prone situations on a construction site. The article attempts to assess the state of threat of working on scaffolding on the basis of the proposed coefficients concerning the possibility of an occupational accident occurring. The article presents the analysis of 10 parameters, which were classified into three groups of factors that cause accidents: technical, organizational, and human factors. In order to assess the state of threat of working on scaffolding, partial hazard factors and a simplified and accurate factor of the state of threat of working were proposed. The coefficients were determined on the basis of the data collected from post-accidental control reports on occupational accidents occurring on scaffolding in the construction industry that took place in Poland in five voivodeships in the years 2008–2017, and also on the basis of the obtained results of research on 120 scaffoldings conducted in the years 2016–2018. Based on the determined factors, it was possible to determine the probability of an undesirable event, in other words, an occupational accident. In addition, the developed test method proposed numerical scales for assessing the state of threat of working on scaffolding. The form proposed in the article for assessing the state of threat of working on scaffolding, which was developed using a spreadsheet, can provide support for people managing work at workstations involving scaffolding, for example, construction directors, construction engineers, work managers, or construction managers.
Keywords: scaffolding; occupational accidents; occupational safety; hazards at workplaces; construction industry scaffolding; occupational accidents; occupational safety; hazards at workplaces; construction industry

Share and Cite

MDPI and ACS Style

Sawicki, M.; Szóstak, M. Quantitative Assessment of the State of Threat of Working on Construction Scaffolding. Int. J. Environ. Res. Public Health 2020, 17, 5773. https://doi.org/10.3390/ijerph17165773

AMA Style

Sawicki M, Szóstak M. Quantitative Assessment of the State of Threat of Working on Construction Scaffolding. International Journal of Environmental Research and Public Health. 2020; 17(16):5773. https://doi.org/10.3390/ijerph17165773

Chicago/Turabian Style

Sawicki, Marek, and Mariusz Szóstak. 2020. "Quantitative Assessment of the State of Threat of Working on Construction Scaffolding" International Journal of Environmental Research and Public Health 17, no. 16: 5773. https://doi.org/10.3390/ijerph17165773

APA Style

Sawicki, M., & Szóstak, M. (2020). Quantitative Assessment of the State of Threat of Working on Construction Scaffolding. International Journal of Environmental Research and Public Health, 17(16), 5773. https://doi.org/10.3390/ijerph17165773

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop