Search Results (9)

During the process of oil and gas drilling, due to the existence of pores or micro-cracks, drilling fluid is prone to invade the formation. Under the action of hydration expansion of clay in the formation and liquid pressure, wellbore instability occurs. In order to reduce the wellbore instability caused by drilling fluid intrusion into the formation, this study proposed a method of forming a dynamic hydrogen bond cross-linked network weak gel structure with modified nano-silica and P(AM-AAC). The plugging performance of the drilling fluid and the performance of inhibiting the hydration of shale were evaluated through various experimental methods. The results show that the gel composite system (GCS) effectively optimizes the plugging performance of drilling fluid. The 1% GCS can reduce the linear expansion rate of cuttings to 14.8% and increase the recovery rate of cuttings to 96.7%, and its hydration inhibition effect is better than that of KCl and polyamines. The dynamic cross-linked network structure can significantly increase the viscosity of drilling fluid. Meanwhile, by taking advantage of the liquid-phase viscosity effect and the physical blocking effect, the loss of drilling fluid can be significantly reduced. Mechanism studies conducted using zeta potential measurement, SEM analysis, contact angle measurement and capillary force assessment have shown that modified nano-silica stabilizes the wellbore by physically blocking the nano-pores of shale and changing the wettability of the shale surface from hydrophilic to hydrophobic when the contact angle exceeds 60°, thereby reducing capillary force and surface free energy. Meanwhile, the dynamic cross-linked network can reduce the seepage of free water into the formation, thereby significantly lowering the fluid loss of the drilling fluid. This research provides new insights into improving the stability of the wellbore in drilling fluids. Full article

EZFLOW weak gel drilling fluid, a drilling fluid system with distinctive internal architecture, has been extensively implemented in horizontal well drilling operations at the Western South China Sea oilfields. Its unique internal structure causes specific functional mechanisms. The rheological mechanism was investigated through microstructural characterization, revealing that the microstructure comprises a reversible network structure with sol particles either encapsulated within the network or embedded at nodal points. This distinctive spatial network configuration endows the system with exceptional rheological properties. The plugging mechanism was elucidated via pre- and post-PPA test characterization of sand disc surface morphology. Experimental results demonstrate that the rheology modifier EZVIS forms deformable aggregates and films through intermolecular or intramolecular association in aqueous solutions, effectively plugging micro-nano pores/throats and microfractures to inhibit drilling fluid filtrate invasion. Concurrently, the rigid plugging material EZCARB establishes physical barriers at micro-nano pores/throats through bridging mechanisms. Notably, the dense filter cake formed by EZFLOW weak gel drilling fluid exhibits poor flowback characteristics, potentially inducing reservoir damage. Based on mechanistic analyses of rheological behavior, plugging performance, and filter cake composition, a filter cake removal fluid formulation was developed through: (1) creation of retarded acid HWCP to degrade polymer EZVIS and dissolve temporary plugging agent EZCARB; (2) development of corrosion inhibitor HWCI to mitigate corrosion rates. Laboratory evaluations demonstrated effective filter cake elimination and reservoir protection capabilities. Post-treatment analysis of EZFLOW-contaminated reservoir cores showed complete filter cake removal at core end faces with permeability recovery values exceeding 95%, indicating superior filter cake dissolution capacity and reservoir protection performance that significantly reduces formation damage. Full article

To address the problem of insufficient temperature and salt resistance of existing polymer viscosity enhancers, we designed an organic–inorganic hybrid composite as a viscosity enhancer for water-based drilling fluids, named LAZ, and it was prepared by combining a water-soluble monomer and lithium magnesium silicate (LMS) using an intercalation polymerization method. The composite LAZ was characterized using Fourier transform infrared spectroscopy, transformed target X-ray diffractometry, scanning electron microscopy, and thermogravimetric analysis. The rheological properties of the composite LAZ were evaluated. The composite LAZ was used as a water-based drilling fluid viscosity enhancer, and the temperature and salt resistance of the drilling fluid were evaluated. The results showed that the composite LAZ presented a complex reticulation structure in an aqueous solution. This reticulation structure intertwined with each other exhibited viscosity-enhancing properties, which can enhance the suspension properties of water-based drilling fluids. The aqueous solution of the composite LAZ has shear dilution properties. As shear rate increases, shear stress becomes larger. The yield stress value of the aqueous solution increases as the composite LAZ’s concentration increases. The aqueous solution of the composite LAZ exhibits strong elastic characteristics with weak gel properties. The addition of the composite LAZ to 4% sodium bentonite-based slurry significantly increased the apparent viscosity and dynamic shear of the drilling fluid. The drilling fluids containing the composite LAZ had good temperature resistance at 150 °C and below. The rheological properties of brine drilling fluids containing the composite LAZ changed slightly before and after high-temperature aging at 150 °C. Full article

To enhance the performance and reduce the amount of ester-based lubricants used in weak gel drilling fluids, a shear dynamics simulation under extreme pressure conditions was employed to refine the formulation of the base oil and pressure additives. The simulation results were validated using fatty acid methyl, ethyl, and butyl esters. Fatty acid methyl ester demonstrated the lowest temperature increase and the highest load-bearing capacity post-shear. The four-ball friction test revealed that methyl oleate had a coefficient of friction of 0.0018, approximately a third of that for butyl oleate, confirming the simulation’s accuracy. By using methyl oleate as the base oil and oleamide as the pressure-resistant component, the optimal shear stress was achieved with a 10% addition of oleamide. A lubricant composed of 90% methyl oleate and 10% oleamide was tested and showed a coefficient of friction of 0.03 when 0.5% was added to bentonite slurry, indicating a strong lubricating film. Adding 1% of this lubricant to a low gel drilling fluid system did not affect its rheological properties, and the gel structure remained stable after seven days of aging. Field tests at the Fu86-3 well in the Jiangsu Oilfield of Sinopec confirmed that adding 1% of the ester-based lubricant to the drilling fluid significantly improved drilling efficiency, reduced drag by an average of 33%, and increased the drilling rate to 22.12 m/h. This innovation effectively prevents drilling complications and successfully achieves the objectives of enhancing efficiency. Full article

This study addresses the performance challenges of Synthetic-Based Drilling Fluids (SBDF) in deep wells and high-temperature environments by engineering a novel multiple hydrogen-bonded crosslinked polymer, MBAH/nano-SiO₂. Synthesized using methyl methacrylate (MMA), butyl methacrylate (BMA), acrylic acid (AA), N-hydroxyethyl acrylamide (HEAA), and nano-silica (nano-SiO₂), the polymer improved crosslinking density, thermal properties, particle size distribution, and colloidal stability. The development of a ‘weak gel’ structure in W/O emulsions improved rheology and electrical stability (ES), with ES values reaching up to 775 V after aging at 180 °C. Moreover, the polymer’s amphiphilic structure and the synergistic effect of nano-SiO₂ increased emulsion film thickness and strength, further augmenting stability. The high-temperature and high-pressure filtration loss of SBDF was considerably reduced to 7.6 mL, benefiting well wall stability and reservoir damage control. This study provides crucial insights into optimizing multiple hydrogen-bonded crosslinked strategies and polymers in SBDF applications. Full article

Oil-based drilling fluids are widely used in challenging wells such as those with large displacements, deepwater and ultra-deepwater wells, deep wells, and ultra-deep wells due to their excellent temperature resistance, inhibition properties, and lubrication. However, there is a challenging issue of rheological deterioration of drilling fluids under high-temperature conditions. In this study, a dual-amphiphilic segmented high-temperature-resistant gelling agent (HTR-GA) was synthesized using poly fatty acids and polyether amines as raw materials. Experimental results showed that the initial decomposition temperature of HTR-GA was 374 °C, indicating good thermal stability. After adding HTR-GA, the emulsion coalescence voltage increased for emulsions with different oil-to-water ratios. HTR-GA could construct a weak gel structure in oil-based drilling fluids, significantly enhancing the shear-thinning and thixotropic properties of oil-based drilling fluids under high-temperature conditions. Using HTR-GA as the core, a set of oil-based drilling fluid systems with good rheological properties, a density of 2.2 g/cm³, and temperature resistance up to 220 °C were constructed. After aging for 24 h at 220 °C, the dynamic shear force exceeded 10 Pa, and G′ exceeded 7 Pa, while after aging for 96 h at 220 °C, the dynamic shear force exceeded 4 Pa, and G″ reached 7 Pa. The synthesized compound HTR-GA has been empirically validated to significantly augment the rheological properties of oil-based drilling fluids, particularly under high-temperature conditions, showcasing impressive thermal stability with a resistance threshold of up to 220 °C. This notable enhancement provides critical technical reinforcement for progressive exploration endeavors in deep and ultra-deep well formations, specifically employing oil-based drilling fluids. Full article

Drilling cuttings from the rock formation generated during the drilling process are generally smashed to fine particles through hydraulic cutting and grinding using a drilling tool, and then are mixed with the drilling fluid during circulation. However, some of these particles are too small and light to be effectively removed from the drilling fluid via solids-control equipment. These small and light solids are referred to as low gravity solids (LGSs). This work aimed to investigate the effect of LGSs on the performance of oil-based drilling fluid (OBDF), such as the rheological properties, high-temperature and high-pressure filtration loss, emulsion stability, and filter cake quality. The results show that when the content of LGSs reached or even exceeded the solid capacity limit of the OBDF, the rheological parameters including the plastic viscosity, gel strength, and thixotropy of OBDF increased significantly. Furthermore, the filtration of OBDF increases, the filter cake becomes thicker, the friction resistance becomes larger, and the stability of emulsion of OBDF also decreases significantly when the concentration of LGSs reached the solid capacity limit of OBDF (6–9 wt% commonly). It was also found that LGSs with a smaller particle size had a more pronounced negative impact on the drilling fluid performance. This work provides guidance for understanding the impact mechanism of LGSs on drilling fluid performance and regulating the performance of OBDF. Full article

Drilling fluid is the blood of drilling engineering. In the polar drilling process, the ultra-low temperature environment puts high demands on the rheological performance of drilling fluids. In this paper, the effects of temperature, ice debris concentration and weighting agent on the rheological properties of drilling fluids were studied. It was found that the lower the temperature and the higher the ice debris concentration, the higher the drilling fluid viscosity, but when the ice debris concentration was below 2%, the drilling fluid rheology hardly changed. Secondly, the low temperature rheological properties of drilling fluid were adjusted by three different methods: base fluid ratio, organoclay, and polymers (dimer acid, polymethacrylate, ethylene propylene copolymer, and vinyl resin). The results showed that the base fluid rheological performance was optimal when the base fluid ratio was 7:3. Compared with polymers, organoclay has the most significant improvement on the low temperature rheological performance of drilling fluid. The main reason is that organoclay can transform the drilling fluid from Newtonian to non-Newtonian fluid, which exhibits excellent shear dilution of drilling fluid. The organoclay is also more uniformly dispersed in the oil, forming a denser weak gel mesh structure, so it is more effective in improving the cuttings carrying and suspension properties of drilling fluids. However, the drilling fluid containing polymer additives is still a Newtonian fluid, which cannot form a strong mesh structure at ultra-low temperatures, and thus cannot effectively improve the low-temperature rheological performance of drilling fluid. In addition, when the amount of organoclay is 2%, the improvement rate of the yield point reaches 250% at −55 °C, which can effectively improve the cuttings carrying and suspension performance of drilling fluid at ultra-low temperature. Full article

Oil-based drilling fluids (OBDFs) are widely used, but there are common problems associated with them, such as low yield point and poor cutting–carrying and hole cleaning ability. In this paper, a polyamide wax (TQ-1) was synthesized from dimeric acid and 1,6-hexanediamine to improve the weak gel structure of OBDFs. The TQ-1 was characterized by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). Then the effect of the TQ-1 on the stability of the water-in-oil emulsion was studied by sedimentation observation, stability analysis, an electrical stability test, and particle size measurement. The effect of the TQ-1 on the rheological properties of the water-in-oil emulsion was analyzed by viscosity vs. shear rate test and the three-interval thixotropic test. Finally, the performance of the TQ-1 in OBDFs was comprehensively evaluated. The experimental results showed that the initial thermal decomposition temperature of the TQ-1 was 195 °C, indicating that the TQ-1 had good thermal stability. After adding the TQ-1, the emulsion became more stable since the emulsion stability index (TSI) value decreased when the emulsions were placed for a period of time and the demulsification voltage was increased. The TQ-1 could form a weak gel structure in the water-in-oil emulsions, which made the emulsions show excellent shear thinning and thixotropy. TQ-1 can improve the demulsification voltage of OBDFs, greatly improve the yield point and gel strength, and largely reduce the sedimentation factor (SF). In addition, TQ-1 has good compatibility with OBDFs, and in our study the high-temperature and high-pressure (HTHP) filtration decreased slightly after adding the TQ-1. According to theoretical analysis, the mechanism of TQ-1 of improving the weak gel structure of OBDFs is that the polar amide group can form a spatial network structure in nonpolar solvents through hydrogen bonding. Full article