Search Results (21)

This paper employs five different general-purpose optimization methods to perform parameter optimization on single-layer hollow antiresonant fibers. It provides guidance on the establishment of hyperparameters for various optimization methods, with the aim of further defining and standardizing the necessary conditions and convergence criteria for applying optimization algorithms to specialty optical fibers. Through numerical experiments, the study ultimately obtains the converged optimal performance and the range of optimized parameter guidance for single-layer, double-layer, and triple-layer antiresonant fibers with different topological structures. Full article

Standard single-mode telecommunication optical fiber is still one of the most popular in distributed acoustic sensing. Understanding the acoustic, mechanical and optical features of various fibers available currently can lead to a better optimization of distributed acoustic sensors, cost reduction and adaptation for specific needs. In this paper, a study of the performances of seven fibers with different coatings and production methods in a distributed acoustic sensor setup is presented. The main results include the amplitude–frequency characteristic for each of the investigated fibers in the range of acoustic frequencies from 100 to 7000 Hz. A single-mode fiber fabricated using the modified chemical vapor deposition technique together with a polyimide coating has shown the best sensitivity to acoustic events in the investigated range of frequencies. All of this allows us to both compare the studied specialty fibers with the standard single-mode fiber and choose the most suitable fiber for a specific application, providing an enhancement for the performance of distributed acoustic sensors and better adaptation for the newly aroused potential applications. Full article

In this work, we propose a fiber Bragg grating (FBG)-based sensor for curvature measurements. Two gratings are inscribed through the protective coating in a specialty optical fiber using focused femtosecond laser pulses and point-by-point direct writing technology. One grating is inscribed on the central core adjacent to an air channel, while the other is inscribed on the eccentric core. The bending characteristics of the two-core fiber strongly depend on the bending direction due to the asymmetry of the fiber cores. A bending sensitivity of 58 $\mathrm{p}\mathrm{m}/{\mathrm{m}}^{-1}$ is achieved by the FBG in the eccentric fiber core over the curvature range of 0–50 ${\mathrm{m}}^{-1}$. Temperature and humidity cross-sensitivity could be significantly reduced by analyzing the differences in peak shifts between the two gratings. The sensor features a large sensing range and good robustness due to the presence of its protective buffer coating, which makes it a good candidate for curvature sensing in engineering fields. Full article

Optical fiber biosensors can be used to develop point-of-care tests (POCTs) for detecting viruses and bacteria in several matrices. In particular, the surface plasmon resonance (SPR) and localized SPR phenomena (LSPR) can be excited by exploiting low-cost and small-size optical fiber chips. Generally, SPR or LSPR sensors are realized using several kinds of modified optical fibers (silica, plastic, or specialty) or by exploiting other optical waveguides (e.g., slab, spoon-shaped waveguides, etc.). More specifically, optical fiber sensors can be classified as intrinsic or extrinsic. In the “optical fiber intrinsic sensors”, the sensing area is realized in the optical fiber directly, such as in the case of plasmonic platforms based on D-shaped plastic optical fibers (POFs), tapered optical fibers, U-bend POFs, or light-diffusing fibers (LDFs). By contrast, when an optical fiber is used as a mere waveguide allowing for the launch of light to the sensing region and its collection, it is defined as an extrinsic optical fiber sensor, like in the case of the plasmonic sensors realized by Cennamo et al. using POFs combined with spoon-shaped waveguides, 3D-printed platforms, bacterial cellulose waveguides, nanogratings, and InkJet-printed chips. To realize optical biosensor chips for the detection of viruses and bacteria, both intrinsic and extrinsic plasmonic POF sensors can be efficiently combined with receptors specific for membrane proteins, either biological (e.g., antibodies, aptamers, enzymes, etc.) or synthetic (e.g., molecularly imprinted polymers), to build groundbreaking POCTs. Full article

Fiber-optic biosensors based on localized surface plasmon resonance (LSPR) have the advantages of great biocompatibility, label-free, strong stability, and real-time monitoring of various analytes. LSPR fiber-optic biosensors have attracted extensive research attention in the fields of environmental science, clinical medicine, disease diagnosis, and food safety. The latest development of LSPR fiber-optic biosensors in recent years has focused on the detection of clinical disease markers and the detection of various toxic substances in the environment and the progress of new sensitization mechanisms in LSPR fiber-optic sensors. Therefore, this paper reviews the LSPR fiber-optic sensors from the aspects of working principle, structure, and application fields in biosensors. According to the structure, the sensor can be divided into three categories: traditional ordinary optical fiber, special shape optical fiber, and specialty optical fiber. The advantages and disadvantages of existing and future LSPR fiber-optic biosensors are discussed in detail. Additionally, the prospect of future development of fiber-optic biosensors based on LSPR is addressed. Full article

In this paper, a ratiometric approach to sensing temperature variations is shown using specialty fiber optic devices. We analyzed the transmission response of cascaded segments of multicore fibers (MCFs), and dissimilar lengths were found to generate an adequate scheme for ratiometric operation. The perturbation of optical parameters in the MCFs translates to a rich spectral behavior in which some peaks increase their intensity while others decrease their intensity. Thus, by selecting opposite-behavior peaks, highly sensitive ratiometric measurements that provide robustness against spurious fluctuations can be performed. We implemented this approach using seven-core fiber (SCF) segments of 5.8 cm and 9.9 cm. To test the system’s response under controlled perturbations, we heated one of the segments from ambient temperature up to 150 °C. We observed defined peaks with opposite behavior as a function of temperature. Two pairs of peaks within the interrogation window were selected to perform ratiometric calculations. Ratiometric measurements exhibited sensitivities 6–14 times higher than single-wavelength measurements. A similar trend with enhanced sensitivity in both peak pairs was obtained. In contrast to conventional interferometric schemes, the proposed approach does not require expensive facilities or micrometric-resolution equipment. Moreover, our approach has the potential to be realized using commercial splicers, detectors, and filters. Full article

The properties of specialty optical fiber technology are determined by many aspects, such as the choice of material from which optical fibers are made, the refractive index profile, or the optical fiber manufacturing method. Typical optical fibers are made from ultrapure silicon dioxide (SiO₂), called fused silica, in a process called chemical vapor deposition (CVD). The differences between refractive indexes are most often obtained by doping silica glass with selected inorganic compounds, mainly germanium dioxide (GeO₂), which increases the refractive index, and fluorine, which lowers it accordingly. The proper design of the dopant profile in the optical fiber core and in the layer surrounding the core is crucial for nonlinear optical fibers with shaped dispersion characteristics. Such optical fibers can be used for the generation of nonlinear phenomena, such as supercontinuum generation (broadband light source) or soliton self-frequency shift. As part of the research, structures of nonlinear optical fibers with flattened normal dispersion in the near-infrared range were designed through the use of numerical simulations in COMSOL Multiphysics. The theoretical chromatic dispersion characteristics and dependence of the effective mode field area on the wavelength were obtained from the theoretical structures. Based on the designed optical fiber structures, a series of nonlinear optical fibers were produced, which were characterized by a high concentration of GeO₂ in the core and the presence of a fluorine-doped layer around the core. The influence of geometrical parameters, e.g., the width of the fluorine-doped layer (ratio of the radius of the fluorosilicate layer to the radius of the core), and the imperfections resulting from the technological aspects on the optical properties of manufactured optical fibers, with a particular emphasis on chromatic dispersion and the effective mode field area, was determined experimentally. Theoretical optical fiber models, along with their calculated properties (chromatic dispersion and effective mode field area), were compared with real measurements. Full article

A very simple to realize, low-cost, and highly sensitive plasmonic sensor, based on a polymeric light-diffusing fiber (LDF), is presented. The proposed surface plasmon resonance (SPR) sensor is realized by sputtering a gold nanofilm on an LDF made of PMMA. More specifically, a plastic LDF manufactured by GLOBAL ENGINEERING NETWORK SRL (Dosson di Casier, Italy) is used to realize this sensor. The optical fiber is an uncladded POF, with a simil-PMMA core of about 1600 μm in diameter and a removable jacket of about 400 μm (total diameter of about 2 mm). The SPR sensor is achieved by removing the jacket with a mechanical stripper and covering the exposed LDF surface with a 60 nm-thick gold film with a length of about 120 mm. The obtained sensor’s sensitivity varies linearly with the refractive index, and it ranges from about 1000 (nm/RIU) to almost 3000 (nm/RIU) in the considered refractive index range (from 1.332 RIU to 1.392 RIU). The obtained sensitivity values are comparable with those achieved using other SPR optical fiber sensors, but with the advantage of having a very simple production process, which does not require optical fiber modifications (such as the polishing process, tapering process, etc). So, the proposed LDF-based plasmonic sensor could be used to realize novel kinds of optical biosensors and chemical sensors. Full article

In the last years, optical fiber sensors have proven to be a reliable and versatile biosensing tool. Optical fiber biosensors (OFBs) are analytical devices that use optical fibers as transducers, with the advantages of being easily coated and biofunctionalized, allowing the monitorization of all functionalization and detection in real-time, as well as being small in size and geometrically flexible, thus allowing device miniaturization and portability for point-of-care (POC) testing. Knowing the potential of such biosensing tools, this paper reviews the reported OFBs which are, at the moment, the most cost-effective. Different fiber configurations are highlighted, namely, end-face reflected, unclad, D- and U-shaped, tips, ball resonators, tapered, light-diffusing, and specialty fibers. Packaging techniques to enhance OFBs’ application in the medical field, namely for implementing in subcutaneous, percutaneous, and endoscopic operations as well as in wearable structures, are presented and discussed. Interrogation approaches of OFBs using smartphones’ hardware are a great way to obtain cost-effective sensing approaches. In this review paper, different architectures of such interrogation methods and their respective applications are presented. Finally, the application of OFBs in monitoring three crucial fields of human life and wellbeing are reported: detection of cancer biomarkers, detection of cardiovascular biomarkers, and environmental monitoring. Full article

Plasmonic bio/chemical sensing based on optical fibers combined with molecularly imprinted nanoparticles (nanoMIPs), which are polymeric receptors prepared by a template-assisted synthesis, has been demonstrated as a powerful method to attain ultra-low detection limits, particularly when exploiting soft nanoMIPs, which are known to deform upon analyte binding. This work presents the development of a surface plasmon resonance (SPR) sensor in silica light-diffusing fibers (LDFs) functionalized with a specific nanoMIP receptor, entailed for the recognition of the protein human serum transferrin (HTR). Despite their great versatility, to date only SPR-LFDs functionalized with antibodies have been reported. Here, the innovative combination of an SPR-LFD platform and nanoMIPs led to the development of a sensor with an ultra-low limit of detection (LOD), equal to about 4 fM, and selective for its target analyte HTR. It is worth noting that the SPR-LDF-nanoMIP sensor was mounted within a specially designed 3D-printed holder yielding a measurement cell suitable for a rapid and reliable setup, and easy for the scaling up of the measurements. Moreover, the fabrication process to realize the SPR platform is minimal, requiring only a metal deposition step. Full article

This paper demonstrates the fabrication of radiation-resistant fiber Bragg grating (FBG) sensors using infrared femtosecond laser irradiation. FBG sensors were written inside acrylate-coated fluorine-doped single-mode specialty optical fibers. We detected the Bragg resonance at 1542 nm. By controlling the irradiation conditions, we improved the signal strength coming out from the FBG sensors. A significant reduction in the Bragg wavelength shift was detected in the fabricated FBG sensors for a radiation dose up to 10⁵ gray, indicating excellent radiation resistance capabilities. We also characterized the temperature sensitivity of the radiation-resistant FBG sensors and detected outstanding performance. Full article

Specialty fibers have introduced new functionalities and opportunities in distributed fiber sensing applications. Particularly, Brillouin optical time domain analysis (BOTDA) systems have leveraged the unique features of specialty fibers to achieve performance enhancement in various sensing applications. This paper provides an overview of recent developments of the specialty fibers based BOTDA technologies and their sensing applications. The specialty fibers based BOTDA systems are categorized and reviewed based on the new features or performance enhancements. The prospects of using specialty fibers for BOTDA systems are discussed. Full article

Specialty fibers have enabled a wide range of sensing applications. Particularly, with the recent advancement of anti-resonant effects, specialty fibers with hollow structures offer a unique sensing platform to achieve highly accurate and ultra-compact fiber optic sensors with large measurement ranges. This review presents an overview of recent progress in anti-resonant hollow-core fibers for sensing applications. Both regular and irregular-shaped fibers and their performance in various sensing scenarios are summarized. Finally, the challenges and possible solutions are briefly presented with some perspectives toward the future development of anti-resonant hollow-core fibers for advanced sensing. Full article