Search Results (9)

Air pollution presents a serious hazard to human health and the environment for the global rise in industrialization and urbanization. While fine-grained monitoring is crucial for understanding the formation and control of air pollution and their effects on human health, existing macro-regional level or ground-level methods make air pollution inference in the same spatial scale and fail to address the spatiotemporal correlations between cross-grained air pollution distribution. In this paper, we propose a 3D spatiotemporal attention super-resolution model (AirSTFM) for fine-grained air pollution inference at a large-scale region level. Firstly, we design a 3D-patch-wise self-attention convolutional module to extract the spatiotemporal features of air pollution, which aggregates both spatial and temporal information of coarse-grained air pollution and employs a sliding window to add spatial local features. Then, we propose a bidirectional optical flow feed-forward layer to extract the short-term air pollution diffusion characteristics, which can learn the temporal correlation contaminant diffusion between closeness time intervals. Finally, we construct a spatiotemporal super-resolution upsampling pretext task to model the higher-level dispersion features mapping between the coarse-grained and fined-grained air pollution distribution. The proposed method is tested on the PM_2.5 pollution datatset of the Yangtze River Delta region. Our model outperforms the second best model in RMSE, MAE, and MAPE by 2.6%, 3.05%, and 6.36% in the 100% division, and our model also outperforms the second best model in RMSE, MAE, and MAPE by 3.86%, 3.76%, and 12.18% in the 40% division, which demonstrates the applicability of our model for different data sizes. Furthermore, the comprehensive experiment results show that our proposed AirSTFM outperforms the state-of-the-art models. Full article

An airborne bistatic radar working in downward-looking mode confronts two major challenges for low-altitude target detection. One is range cell migration (RCM) and Doppler migration (DM) resulting from the relative motion of the radar and target. The other is the non-stationarity characteristic of clutter due to the radar configuration. To solve these problems, this paper proposes a joint implementation method based on sub-aperture processing to achieve clutter suppression and coherent maneuvering target detection. Specifically, clutter Doppler compensation and sliding window processing are carried out to realize sub-aperture space–time processing, removing the clutter non-stationarity resulting from the bistatic geometric configuration. Thus, the output matrix of clutter suppression in the sub-aperture could be obtained. Then, the elements with the same phase of this matrix are superimposed and rearranged to achieve the reconstructed 2-D range-pluse echo matrix. Next, the aperture division with respect to slow time is conducted and the RCM correction based on modified location rotation transform (MLRT) and coherent integration (CI) are realized within each sub-aperture. Finally, the matched filtering process (MFP) is applied to compensate for the RCM/DM among different sub-apertures to coherently integrate the maneuvering target energy of all sub-apertures. The simulation and measured data processing results prove the validity of the proposed method. Full article

Radio frequency (RF) fingerprints have been an emerging research topic for the last decade. Numerous algorithms for recognition have been proposed. However, very few algorithms for the accurate extraction of IQI and PA nonlinearity are available, especially when multiple paths are considered. In this study, we present a scheme that uses the transmitter in-phase/quadrature-phase imbalance (IQI) and the power amplifier (PA) nonlinearity as RF fingerprint features in time-division duplexing (TDD) OFDM systems, which are always considered to be harmful to data transmission. The scheme consists of two round trips with four steps for two cases: in the first, the IQI and PA nonlinearity are unknown at the terminal; in the second, they are known at the terminal. A channel state information (CSI)-tracking algorithm based on the sliding-window least squares method is first adopted at the terminal. In case A, the obtained CSI is sent to the base station (BS) to remove its impact there; in case B, this removal is conducted directly by using pre-equalization at the terminal. Then, by following a sequential iterative approach, the IQI and nonlinearity are individually calculated. Theoretical analyses reveal how CSI estimation errors influence subsequent estimates at the BS in these two cases. Furthermore, the approximate unbiasedness is verified. The theoretical variance and Cramer–Rao lower bound (CRLB) are also given. It is indicated that the theoretical minimum variance in case B is lower than that in case A from the perspective of the CRLB. The numerical results demonstrate the efficiency of the scheme in comparison with existing techniques in the literature. Full article

In this paper, we propose a wildlife detection algorithm based on improved YOLOv5s by combining six real wildlife images of different sizes and forms as datasets. Firstly, we use the RepVGG model to simplify the network structure that integrates the ideas of VGG and ResNet. This RepVGG introduces a structural reparameterization approach to ensure model flexibility while reducing the computational effort. This not only enhances the ability of model feature extraction but also speeds up the model computation, further improving the model’s real-time performance. Secondly, we use the sliding window method of the Swin Transformer module to divide the feature map to speed up the convergence of the model and improve the real-time performance of the model. Then, it introduces the C3TR module to segment the feature map, expand the perceptual field of the feature map, solve the problem of backpropagation gradient disappearance and gradient explosion, and enhance the feature extraction and feature fusion ability of the model. Finally, the model is improved by using SimOTA, a positive and negative sample matching strategy, by introducing the cost matrix to obtain the highest accuracy with the minimum cost. The experimental results show that the improved YOLOv5s algorithm proposed in this paper improves mAP by 3.2% and FPS by 11.9 compared with the original YOLOv5s algorithm. In addition, the detection accuracy and detection speed of the improved YOLOv5s model in this paper have obvious advantages in terms of the detection effects of other common target detection algorithms on the animal dataset in this paper, which proves that the improved effectiveness and superiority of the improved YOLOv5s target detection algorithm in animal target detection. Full article

This paper proposed a quality-related online monitoring strategy based on time and batch two-dimensional evolution information for batch processes. In the direction of time, considering the difference between each phase and the steady part and the transition part in the same phase, the change trend of the regression coefficient of the PLS model is used to divide each batch into phases, and each phase into parts. The phases, the steady parts, and the transition parts are finally distinguished and dealt with separately in the subsequent modeling process. In the batch direction, considering the slow time-varying characteristics of batch evolution, sliding windows are used to perform mode division by analyzing the evolution trend of the score matrix T in the PLS model on the base of phase division and within-phase part division. Finally, an online monitoring model that comprehensively considers the evolution information of time and batch is obtained. In a typical batch operation process, injection molding is used as an example for experimental analysis. The results show that the proposed algorithm takes advantage of mixing the time-batch two-dimensional evolution information. Compared with the traditional methods, the proposed method can overcome the shortcomings caused by the single dimension analysis and has better monitoring results. Full article

The variable background harmonic data and incomplete phasor information make multi-harmonic source responsibility division in three-phase symmetrical power system a significant challenge. In this paper, a background harmonic data selection method based on canonical correlation analysis is proposed to deal with multi-harmonic source responsibility division without phasor information. Firstly, the canonical correlation coefficient between harmonic voltage and harmonic current is used to characterize the fluctuations of background harmonic voltage. Then, the sliding window method is adopted to select the harmonic voltage and harmonic current with small fluctuations. Next, the canonical correlation results for selected data are used to calculate the harmonic responsibility index via the linear regression method. The harmonic responsibility index in the form of percentage represents the harmonic responsibility division. Finally, several experimental results demonstrate that the proposed method has a high accuracy in calculating the harmonic responsibility division, particularly when the user side contains fluctuations of unknown harmonic sources. Full article

Being an important economic crop that contributes 35% of the total consumption of vegetable oil, remote sensing-based quantitative detection of oil palm trees has long been a key research direction for both agriculture and environmental purposes. While existing methods already demonstrate satisfactory effectiveness for small regions, performing the detection for a large region with satisfactory accuracy is still challenging. In this study, we proposed a two-stage convolutional neural network (TS-CNN)-based oil palm detection method using high-resolution satellite images (i.e. Quickbird) in a large-scale study area of Malaysia. The TS-CNN consists of one CNN for land cover classification and one CNN for object classification. The two CNNs were trained and optimized independently based on 20,000 samples collected through human interpretation. For the large-scale oil palm detection for an area of 55 km², we proposed an effective workflow that consists of an overlapping partitioning method for large-scale image division, a multi-scale sliding window method for oil palm coordinate prediction, and a minimum distance filter method for post-processing. Our proposed approach achieves a much higher average F1-score of 94.99% in our study area compared with existing oil palm detection methods (87.95%, 81.80%, 80.61%, and 78.35% for single-stage CNN, Support Vector Machine (SVM), Random Forest (RF), and Artificial Neural Network (ANN), respectively), and much fewer confusions with other vegetation and buildings in the whole image detection results. Full article

A new approach is proposed to detect the real-time gait patterns adaptively through measuring the ground contact forces (GCFs) by force sensitive resistors (FSRs). Published threshold-based methods detect the gait patterns by means of setting a fixed threshold to divide the GCFs into on-ground and off-ground statuses. However, the threshold-based methods in the literature are neither an adaptive nor a real-time approach. To overcome these drawbacks, this study utilized the constant false alarm rate (CFAR) to analyze the characteristics of GCF signals. Specifically, a sliding window detector is built to record the lasting time of the curvature of the GCF signals and one complete gait cycle could be divided into three areas, such as continuous ascending area, continuous descending area and unstable area. Then, the GCF values in the unstable area are used to compute a threshold through the CFAR. Finally, the new gait pattern detection rules are proposed which include the results of the sliding window detector and the division results through the computed threshold. To verify this idea, a data acquisition board is designed to collect the GCF data from able-bodied subjects. Meanwhile, in order to test the reliability of the proposed method, five threshold-based methods in the literature are introduced as reference methods and the reliability is validated by comparing the detection results of the proposed method with those of the reference methods. Experimental results indicated that the proposed method could be used for real-time gait pattern detection, detect the gait patterns adaptively and obtain high reliabilities compared with the reference methods. Full article

Over the years, advanced IT technologies have facilitated the emergence of new ways of generating and gathering data rapidly, continuously, and largely and are associated with a new research and application branch, namely, data stream mining (DSM). Among those multiple scenarios of DSM, the Internet of Things (IoT) plays a significant role, with a typical meaning of a tough and challenging computational case of big data. In this paper, we describe a self-adaptive approach to the pre-processing step of data stream classification. The proposed algorithm allows different divisions with both variable numbers and lengths of sub-windows under a whole sliding window on an input stream, and clustering-based particle swarm optimization (CPSO) is adopted as the main metaheuristic search method to guarantee that its stream segmentations are effective and adaptive to itself. In order to create a more abundant search space, statistical feature extraction (SFX) is applied after variable partitions of the entire sliding window. We validate and test the effort of our algorithm with other temporal methods according to several IoT environmental sensor monitoring datasets. The experiments yield encouraging outcomes, supporting the reality that picking significant appropriate variant sub-window segmentations heuristically with an incorporated clustering technique merit would allow these to perform better than others. Full article