Search Results (3)

The main goal of this research was to design and study the best structure, location, and shape of acoustic diffusers to be fitted on the ceilings of multipurpose auditoriums. Their absorbing properties can enhance the acoustics when installed on high ceilings, and behind suspended reflecting panels, by mitigating or nullifying specular reflections that could overcome the panels and, thus, avoiding time delay gaps exceeding 30–40 ms compared with the direct sound. For this purpose, a typical medium-sized room, with inclined floors, a stage, and 20 rows of seats, was considered. The allocation and height of the considered diffusers were based on the Schroeder quadratic residue sequence, and they were modeled as rectangles, wedges, cylinders, and Y-shaped elements. A standardized speech source spectrum was analyzed for up to five different receiver locations. In this way, the attenuation parameter as a function of frequency was evaluated and compared between the candidate diffusers in order to identify the best absorber. The simulations were undertaken with a software tool previously validated by the authors called PARDOS, which incorporates an innovative formulation based on the uniform theory of diffraction (UTD) to analyze multiple diffractions and reflections of acoustic waves. The results show that the new Y-shaped diffusers proposed, tuned for the hearing frequency band from 250 Hz up to 10,000 Hz, attained the best acoustic performance in terms of absorption. Full article

Adolescent idiopathic scoliosis (AIS) is a three-dimensional axial deviation of the spine diagnosed in adolescence. Despite a long daily sitting duration, there are no studies on whether scoliosis can be positively influenced by sitting on a seat wedge. For the prospective study, 99 patients with AIS were measured with the DIERS formetric III 4D average, in a standing position, on a level seat and with three differently inclined seat wedges (3°, 6° and 9°). The rasterstereographic parameters ‘scoliosis angle’ and ‘lateral deviation RMS’ were analysed. The side (ipsilateral/contralateral) on which the optimal correcting wedge was located in relation to the lumbar/thoraco-lumbar convexity was investigated. It was found that the greatest possible correction of scoliosis occurred with a clustering in wedges with an elevation on the ipsilateral side of the convexity. This clustering was significantly different from a uniform distribution (p < 0.001; chi-square = 35.697 (scoliosis angle); chi-square = 54.727 (lateral deviation RMS)). It should be taken into account that the effect of lateral seat wedges differs for individual types of scoliosis and degrees of severity. The possibility of having a positive effect on scoliosis while sitting holds great potential, which is worth investigating in follow-up studies. Full article

The service life of rolling contacts is dependent on many factors. The choice of materials in particular has a major influence on when, for example, a ball bearing may fail. Within an exemplary process chain for the production of hybrid high-performance components through tailored forming, hybrid solid components made of at least two different steel alloys are investigated. The aim is to create parts that have improved properties compared to monolithic parts of the same geometry. In order to achieve this, several materials are joined prior to a forming operation. In this work, hybrid shafts created by either plasma (PTA) or laser metal deposition (LMD-W) welding are formed via cross-wedge rolling (CWR) to investigate the resulting thickness of the material deposited in the area of the bearing seat. Additionally, finite element analysis (FEA) simulations of the CWR process are compared with experimental CWR results to validate the coating thickness estimation done via simulation. This allows for more accurate predictions of the cladding material geometry after CWR, and the desired welding seam geometry can be selected by calculating the cladding thickness via CWR simulation. Full article