Search Results (6)

Smart cities like Neom require efficient and reliable transportation systems to support their vision of sustainable and interconnected urban environments. High-speed trains (HSTs) play a crucial role in connecting different areas of the city and facilitating seamless mobility. However, to ensure uninterrupted communication along the rail lines, advanced communication systems are essential to expand the coverage range of each base station (BS) while reducing the handover frequency. This paper presents the dual transceiver free space optical (FSO) communication system as a solution to achieve these objectives in the operational environment of HSTs in Neom city. Our channel model incorporates log-normal (LN) and gamma–gamma (GG) distributions to represent channel impairments and atmospheric turbulence in the city. Furthermore, we integrated the siding loop model, providing valuable insights into the system in real-world scenarios. To assess the system’s performance, we formulated the received signal-to-noise ratio (SNR) of the network under assumed fading conditions. Additionally, we analyzed the system’s bit error rate (BER) analytically and through Monte Carlo simulation. A comparative analysis with reconfigurable intelligent surfaces (RIS) and relay-assisted FSO communications shows the superior coverage area and efficiency of the dual transceiver model. A significant reduction of up to 76% and 99% in the number of required BSs compared to RIS and relay, respectively, is observed. This reduction leads to fewer handovers and lower capital expenditure (CAPEX) costs. Full article

In this article, a communication platform for a self-powered integrated light energy harvester based on a wireless hybrid transceiver is proposed. It consists of an optical receiver and a reconfigurable radio frequency (RF) transmitter. The hybrid optical/RF communication approach improves load balancing, energy efficiency, security, and interference reduction. A light beam for communication in the downlink, coupled with a 1 MHz radio frequency signal for the uplink, offers a small area and ultra-low-power consumption design for Smart Dust/IoT applications. The optical receiver employs a new charge-pump-based technique for the automatic acquisition of a reference voltage, enabling compensation for comparator offset errors and variations in DC-level illumination. On the uplink side, the reconfigurable transmitter supports OOK/FSK/BPSK data modulation. Electronic components and the energy harvester, including integrated photodiodes, have been designed, fabricated, and experimentally tested in a 0.18 µm triple-well CMOS technology in a 1.5 × 1.3 mm² chip area. Experiments show the correct system behavior for general and pseudo-random stream input data, with a minimum pulse width of 50 µs and a data transmission rate of 20 kb/s for the optical receiver and 1 MHz carrier frequency. The maximum measured power of the signal received from the transmitter is approximately −18.65 dBm when using a light-harvested power supply. Full article

In future mobile networks, the evolution of optical transport architectures enabling the flexible, scalable interconnection of Baseband Units (BBUs) and Radio Units (RUs) with heterogeneous interfaces is a significant issue. In this paper, we propose a multi-technology hybrid transport architecture that comprises both analog and digital-Radio over Fiber (RoF) mobile network segments relying on a dynamically reconfigurable optical switching node. As a step forward, the integration of the discussed network layout into an existing mobile infrastructure is demonstrated, enabling the support of real-world services through both standard digital and Analog–Intermediate- Frequency over Fiber (A-IFoF)-based converged fiber–wireless paths. Emphasis has been placed on the implementation of a real-time A-IFoF transceiver that is employed through a single embedded fully programmable gateway array (FPGA)-based platform that serves as an Ethernet to Intermediate Frequency (IF) bridge for the transmission of legacy traffic over the analog network segment. The experimental evaluation of the proposed concept was based on the dynamic optical routing of the legacy Common Public Radio Interface (CPRI), 1.5 GBaud analog-intermediate frequency-over-fiber (A-IFoF)/mmWave and 10 Gbps binary optical waveforms, showing acceptable error vector magnitude (EVM) values for the complex radio waveforms and error-free operation for binary optical streams, with Bit Error Rate (BER) values less than 10⁻⁹. Finally, the end-to-end proof-of-concept demonstration of the proposed solution was achieved through the delivery of 4K video streaming and Internet Protocol (IP) calls over a mobile core network. Full article

This paper reviews recent progress on different high-speed optical short- and medium-reach transmission systems. Furthermore, a comprehensive tutorial on high-performance, low-cost, and advanced optical transceiver (TRx) paradigms is presented. In this context, recent advances in high-performance digital signal processing algorithms and innovative optoelectronic components are extensively discussed. Moreover, based on the growing increase in the dynamic environment and the heterogeneous nature of different applications and services to be supported by the systems, we discuss the reconfigurable and sliceable TRxs that can be employed. The associated technical challenges of various system algorithms are reviewed, and we proffer viable solutions to address them. Full article

As the demand for high data volumes keeps increasing in optical access networks, transmission capacities and distance are becoming bottlenecks for passive optical networks (PONs). To solve this problem, a novel scheme based on multi-twin single sideband (SSB) modulation with direct detection is proposed and investigated in this paper. At the central office, two SSB signals are generated simultaneously with the same digital-to-analog converters (DACs). The twin-SSB signal is not only robust against frequency selected power fading introduced by chromatic dispersion (CD), but also improves the spectral efficiency (SE). By combining a twin-SSB technique with multi-band carrier-less amplitude/phase modulation (multi-CAP), different optical network units (ONUs) can be supported by flexible multi-band allocation based on software-reconfigurable optical transceivers. The Kramers–Kronig (KK) scheme is adopted on the ONU side to effectively mitigate the signal–signal beat interference (SSBI) induced by the square-law detection. The proposed system is extensively studied and validated with four sub-bands using 50 Gbps 16 quadrature amplitude modulation (QAM) modulation for each sub-band using numerical simulations. Digital pre-equalization is introduced at the transmitter-side to balance the performance of different ONUs. After system optimization, a bit error rate (BER) threshold for hard decision forward error correction (HD-FEC) code with 7% redundancy ratio (BER = 3.8 × 10⁻³) can be reached for all ONUs over 50-km standard single-mode fiber. Full article

Optical access networks, metro networks and mobile data networks are facing rapidly evolving demands, not only is it essential to satisfy the unyielding need for increased user bandwidths, but future networks must also support the growing wide variation in traffic dynamics and characteristics, due to various emerging technologies, such as cloud-based services, the Internet-of-Things (IoT) and 5G mobile systems, and due to growing trends, such as the proliferation of mobile devices and the rapidly increasing popularity of video-on-demand services. To be cost-effective and commercially sustainable, future optical networks must offer features, such as, dynamic reconfigurability, highly efficient use of network resources, elastic bandwidth provisioning with fine granularity, network sliceabilty and software defined networking (SDN). To meet these requirements Cloud Access Networks (CANs) are proposed which require a number of flexible, adaptive and reconfigurable networking elements. By exploiting digital signal processing (DSP) we have proposed a digital orthogonal filter-based multiplexing technique to implement CANs with multiplexed, independent optical channels at the wavelength, sub-wavelength, and orthogonal sub-band levels. This paper reviews the overall CAN concept, the operating principles of the various CAN network elements and presents an overview of the research work we have undertaken in order to validate the feasibility of the proposed technologies which includes real-time DSP-based demonstrations. Full article