Search Results (4)

Arid and semi-arid areas are suffering from declines in fresh water availability, making food security in these regions strongly dependent on the adaptability of agricultural production to the minimum usage of irrigation water. In response to this critical need, efforts have been directed towards enhancing irrigation efficiency and exploring innovative clay-based subsurface irrigation systems. These systems use clay materials as porous emitters and operate on the principle of capillary water movement from the pottery to the root zone, effectively reducing water evaporation and demonstrating significant water-saving potential. This article presents the results of a systematic literature review, with a specific focus on identifying recent developments and innovations in clay-based subsurface irrigation technologies, describing cases of applicability and indicating directions for future research. This review follows the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and involved the screening of 233 articles that were found through searches on the databases Web of Science and Science Direct combined with searches of Google Scholar and citation searches. As a result, 58 research articles were investigated. The webtool Rayyan was used for the screening of the articles and the synthesis of the results. The spectrum of clay-based irrigation systems identified in the investigated articles includes traditional methods such as clay pot and clay pipe irrigation as well as more recent advancements in the field such as Subsurface Irrigation with Ceramic Emitters (SICE), Self-regulating Low-Energy Clay-based Irrigation (SLECI), and Ceramic Patch Subsurface Drip Irrigation Line (CP-SDIL) and pottery dripper technologies. This paper offers a comprehensive analysis of each irrigation system, highlighting their main characteristics, advantages, and limitations. Particular attention is paid to the reported outcomes related to yield responses, water use efficiency, and suitability for various agricultural applications. This review indicates as a primary benefit of these systems their potential to allow water conservation, which is especially advantageous in regions with a restricted irrigation water supply. However, a major drawback is the challenge of scaling these systems effectively. Hence, the recommended areas for future research centre on the necessity of substantial economic assessments of and discussion on the potential social impact to promote the scalability of clay-based irrigation systems. Full article

A self-sustained porous burner without a sprayed atomizer was built for diesel oil. It consisted of metal fiber felt as an evaporator upstream and ceramic foam as an emitter downstream. The liquid fuel underwent film boiling in the porous evaporator and was rapidly evaporated by the heat recirculated from the porous emitter to the porous evaporator through intense irradiative heat flux. The effect of the porous structure and its installation location on the performance of the porous burner was investigated. The results indicated that the evaporation and combustion of liquid fuel could be prompted by the radiation of porous media. The position of the flame moved downstream, and the flame temperature decreased when the distance between the metal fiber felt and the ceramic foam was increased. The lowest NOx concentration was obtained when the distance between the foam and the metal fiber felt was 90 mm. When the diameter of the central hole of the ceramic foam was increased, the position of the flame moved towards the burner outlet, and the flame temperature and NOx emission declined. The flame temperature of the divergent configuration as emitter was higher than that of the convergent configuration, and the flame temperature of the C–D configuration was higher than that of the D–C configuration. Different ceramic foam structures had a significant effect on the temperature and emission in the combustion chamber, which showed that the evaporation and radiation performance of inert porous media burners with different structures is quite different. Full article

Radioactive materials are potentially harmful due to the radiation emitted by radionuclides and the risk of radioactive contamination. Despite strict compliance with safety protocols, contamination with radioactive materials is still possible. This paper describes innovative and inexpensive formulations that can be employed as ‘eco-friendly’ tools for the safe decontamination of radiopharmaceuticals spills or other accidental radioactive contamination of the surfaces arising from general-purpose radioisotope handling facilities (radiopharmaceutical laboratories, hospitals, research laboratories, etc.). These new peelable nanocomposite coatings are obtained from water-based, non-toxic, polymeric blends containing readily biodegradable components, which do not damage the substrate on which they are applied while also displaying efficient binding and removal of the contaminants from the targeted surfaces. The properties of the film-forming decontamination solutions were assessed using rheological measurements and evaporation rate tests, while the resulting strippable coatings were subjected to Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and tensile tests. Radionuclide decontamination tests were performed on various types of surfaces encountered in radioisotope workspaces (concrete, painted metal, ceramic tiles, linoleum, epoxy resin cover). Thus, it was shown that they possess remarkable properties (thermal and mechanical resistance which permits facile removal through peeling) and that their capacity to entrap and remove beta and alpha particle emitters depends on the constituents of the decontaminating formulation, but more importantly, on the type of surface tested. Except for the cement surface (which was particularly porous), at which the decontamination level ranged between approximately 44% and 89%, for all the other investigated surfaces, a decontamination efficiency ranging from 80.6% to 96.5% was achieved. Full article

Choosing reasonable design parameters for ceramic emitters used in subsurface irrigation is important for reducing the deep percolation of water and improving the water use efficiency. Laboratory experiments and numerical simulations with the HYDRUS-2D software were carried out to analyze the effect of soil texture on the infiltration characteristics of porous ceramic emitters used for subsurface irrigation. HYDRUS-2D predictions of emitter discharge in soil and wetting front are in agreement with experimental results, and the HYDRUS-2D model can be used to accurately simulate soil water movement during subsurface irrigation with ceramic emitters in different soil textures. Results show that soil texture has a significant effect on emitter discharge, soil matrix potential around the emitter, and wetting front. For 12 different soil textures, the aspect ratio of the wetting front is basically between 0.84–1.49. In sandy soil, the wetting front mainly appears as an ellipse; but in the clay, the wetting front is closer to a circle. As irrigation time increases, emitter discharge gradually decreases to a stable value; however, emitter discharge in different texture soils is quite different. In order to improve the crop water use efficiency in sandy soil, soil water retention can be improved by adding a clay interlayer or adding water retention agent, reducing the risk of deep percolation and improving the water use efficiency. Full article