Search Results (6)

Red sandstones of the Cambrian age are globally distributed and represent an important sedimentation phase during this critical time interval. Their sedimentology and geochemistry can provide key information about the sedimentation style, paleoclimatic conditions, and weathering trends during the Cambrian. In the Salt Range of Pakistan, the Khewra Sandstone constitutes the Lower Cambrian strata and consists of red–maroon sandstones with minor siltstone and shale in the basal part. Cross-bedding, graded bedding, ripple marks, parallel laminations, load casts, ball and pillows, desiccation cracks, and bioturbation are the common sedimentary features of the formation. The sandstones are fine to medium to coarse-grained with subangular to subrounded morphology and display an overall coarsening upward trend. Petrographic analysis indicates that the sandstones are sub-arkose and sub-lithic arenites, and dolomite and calcite are common cementing materials. X-ray Diffraction (XRD) analysis indicates that the main minerals in the formation are quartz, feldspars, kaolinite, illite, mica, hematite, dolomite, and calcite. Geochemical analysis indicates that SiO₂ is the major component at a range of 53.3 to 88% (averaging 70.4%), Al₂O₃ ranges from 3.1 to 19.2% (averaging 9.2%), CaO ranges from 0.4 to 25.3% (averaging 7.4%), K₂O ranges from 1.2 to 7.4% (averaging 4.8%), MgO ranges from 0.2 to 7.4% (averaging 3.5%), and Na₂O ranges from 0.1 to 0.9% (averaging 0.4%), respectively. The results of the combined proxies indicate that the sedimentation occurred in fluvial–deltaic settings under overall arid to semi-arid paleoclimatic conditions with poor to moderate chemical weathering. The Khewra Sandstone represents the red Cambrian sandstones on the NW Indian Plate margin of Gondwana and can be correlated with contemporaneous red sandstones in the USA, Europe, Africa, Iran, and Turkey (Türkiye). Full article

In the context of the contemporary accelerated pace of life, emphasizing the importance of sleep quality is essential for enhancing overall well-being and health. Historically underestimated, recent studies highlight sleep’s vital importance for physical, mental, and emotional well-being. Chronic sleep deprivation is connected to numerous health problems such as cardiovascular disease, diabetes, and weakened immune response. Additionally, lack of sleep can worsen stress, depression, and anxiety, impairing daily life and overall quality of life. This study investigates the link between poor sleep quality and key factors affecting wellness, such as mental health and eating disorders. Through a cross-sectional analysis involving 407 participants, utilizing established measures including the Depression Anxiety Stress Scale (DASS-21), the Eating Disorder Examination Questionnaire Short (EDE-QS), and the single-item Sleep Quality Scale (SQS), data were collected and analyzed using SPSS v28 and R-Statistics. The findings reveal a significant correlation (p < 0.05) between DASS-21, EDE-QS, and SQS, indicating that individuals experiencing poor sleep quality exhibit higher levels of depression, anxiety, and stress. Furthermore, multinomial logistic regression analysis highlights low sleep quality as a risk factor for both mental health (OR: 1.071, 95% CI: 1.042, 1.102, p < 0.05, low vs. high sleep quality) and eating disorders (OR: 1.047, 95% CI: 1.004, 1.092, p < 0.05, low vs. high sleep quality). Overall, these results underscore the critical role of sleep quality in mental health and suggest that insomnia is a predictive factor for both poor mental well-being and disordered eating habits. The main contribution of this study is its identification of poor sleep quality as a common risk factor linking mental health issues and eating disorders, which emphasizes the need for integrated treatment strategies focusing on sleep improvement. Further research through randomized controlled trials is warranted to validate the findings of this cross-sectional study. Full article

Pillow-plate heat exchangers (PPHEs) represent a suitable alternative to conventional shell-and-tube and plate heat exchangers. The inherent waviness of their channels promotes fluid mixing in the boundary layers and facilitates heat transfer. The overall thermo-hydraulic performance of PPHEs can further be enhanced by applying secondary surface structuring, thus increasing their competitiveness against conventional heat exchangers. In this work, various secondary structures applied on the PPHE surface were studied numerically to explore their potential to enhance near-wall mixing. Computational fluid dynamics (CFD) simulations of single-phase turbulent flow in the outer PPHE channel were performed and pressure drop, heat transfer coefficients, and overall thermo-hydraulic efficiency were determined. The simulation results clearly demonstrate a positive impact of secondary structuring on heat transfer in PPHEs. Full article

Following up on a proof of concept, this publication presents a new method for mixing mapping on falling liquid films. On falling liquid films, different surfaces, plain or structured, are common. Regarding mixing of different components, the surface has a significant effect on its capabilities and performance. The presented approach combines marker-free and molecule-sensitive measurements with cross-section mapping to emphasize the mixing capabilities of different surfaces. As an example of the mixing capabilities on falling films, the mixing of sodium sulfate with tap water is presented, followed by a comparison between a plain surface and a pillow plate. The method relies upon point-by-point Raman imaging with a custom-built high-working-distance, low-depth-of-focus probe. To compensate for the long-time measurements, the continuous plant is in its steady state, which means the local mixing state is constant, and the differences are based on the liquids’ position on the falling film, not on time. Starting with two separate streams, the mixing progresses by falling down the surface. In conclusion, Raman imaging is capable of monitoring mixing without any film disturbance and provides detailed information on liquid flow in falling films. Full article

Yogurt production at the farm level is important for adding value to milk. In this study, a solar-assisted yogurt processing unit capable of performing the three processes of heating, fermentation, and cooling in a single unit was developed. It consisted of a circular chamber surrounded by a coil for heating by a solar vacuum tube collector and a pillow plate for cooling by a solar PV-powered chiller unit. Experiments were performed using 50, 40 and 30 L of raw milk under a constant water circulation rate of 50 L per minute for heating followed by a cooling process under 36, 18 and 6 rpm of stirrer speeds. The heat absorption rates of the milk were 5.48–0.31, 4.75–0.16 and 4.14–0.24 kW, and the heat removal rates from water ranged from 6.28–0.49, 5.58–0.49 and 4.88–0.69 kW for 50, 40 and 30 L of milk volume, respectively. The overall heat transfer efficiency was above 80% during the heating process. A stirring speed of 18 rpm was found to be optimal in terms of cooling speed and consistency of the yogurt. The total energy consumed was calculated to be 6.732, 5.559 and 4.207 kWh for a 50, 40 and 30 L batch capacity, respectively. The study offers a sustainable energy solution for the decentralized processing of raw milk, particularly in remote areas of the developing countries where access to electricity is limited. Full article

In numerous turbomachinery applications, e.g., in aero-engines with regenerators for improving specific fuel consumption (SFC), heat exchangers with low-pressure loss are required. Pil low-plate heat exchangers (PPHE) are a novel exchanger type and promising candidates for high-speed flow applications due to their smooth profiles avoiding blunt obstacles in the flow path. This work deals with the overall system behavior and gas dynamics of pillow-plate channels. A pillow-plate channel was placed in the test section of a blow-down wind tunnel working with dry air, and compressible flow phenomena were investigated utilizing conventional and focusing schlieren optics; furthermore, static and total pressure measurements were performed. The experiments supported the assumption that the system behavior can be described through a Fanno–Rayleigh flow model. Since only wavy walls with smooth profiles were involved, linearized gas dynamics was able to cover important flow features within the channel. The effects of the wavy wall structures on pressure drop and Mach number distribution within the flow path were investigated, and a good qualitative agreement with theoretical and numerical predictions was found. The present analysis demonstrates that pressure losses in pillow-plate heat exchangers are rather low, although their strong turbulent mixing enables high convective heat transfer coefficients. Full article