Search Results (7)

Aboveground biomass (AGB) is a key indicator of vegetation productivity and terrestrial carbon stocks; therefore, robust AGB estimation is critical for assessing ecosystem services and carbon cycle research. Previous studies have largely focused on forest and cropland ecosystems. In contrast, roadside vegetation along highways and other linear transport corridors remains comparatively underexplored despite its potentially important role as a carbon sink. Here, we integrate field-measured AGB samples with GF-2 high-resolution satellite imagery to evaluate the suitability of multiple remote-sensing predictors and machine-learning algorithms for estimating AGB in highway roadside vegetation. Six remote-sensing variables were used as predictors, including four vegetation indices (Normalized Difference Vegetation Index (NDVI), Perpendicular Vegetation Index (PVI), Enhanced Vegetation Index (EVI), and Modified Soil-Adjusted Vegetation Index (MSAVI) and two-band ratios (B342 and B12/34). Five regression models—multiple linear regression (MLR), partial least squares regression (PLSR), random forest (RF), support vector regression (SVR), and extreme gradient boosting (XGBoost)—were developed and systematically compared under both single-variable and multi-variable scenarios. Model performance was evaluated using five-fold cross-validation, with the coefficient of determination (R²) and the root mean square error (RMSE) as metrics of evaluation. The results indicate that the RF model under the multi-variable scenario achieved the best overall performance, with a training R² of 0.83 and a testing RMSE of 0.84 kg·m⁻², substantially outperforming the other linear and non-linear models. The optimal RF model was further applied to GF-2 imagery to produce a spatially explicit AGB map for a 32 km highway segment and a 30 m roadside buffer on both sides, yielding an estimated total aboveground biomass of 566.97 t for the corridor. These findings demonstrate that combining high-resolution remote sensing with machine-learning approaches can effectively improve AGB estimation for linear roadside vegetation systems, providing technical support for ecological monitoring, roadside greening management, and carbon accounting for transport infrastructure. Full article

The variation in crop growth provides critical insights for yield estimation, crop health diagnosis, precision field management, and variable-rate fertilization. This study constructs key monitoring indicators (KMIs) for corn growth based on satellite remote sensing data, along with inversion models for these growth indicators. Initially, the leaf area index (LAI) and plant height were integrated into the KMI by calculating their respective weights using the entropy weight method. Eight vegetation indices derived from Sentinel-2A satellite remote sensing data were then selected: the Normalized Difference Vegetation Index (NDVI), Perpendicular Vegetation Index (PVI), Soil-Adjusted Vegetation Index (SAVI), Red-Edge Inflection Point (REIP), Inverted Red-Edge Chlorophyll Index (IRECI), Pigment Specific Simple Ratio (PSSRa), Terrestrial Chlorophyll Index (MTCI), and Modified Chlorophyll Absorption Ratio Index (MCARI). A comparative analysis was conducted to assess the correlation of these indices in estimating corn plant height and LAI. Through recursive feature elimination, the most highly correlated indices, REIP and IRECI, were selected as the optimal dual red-edge vegetation indices. A deep neural network (DNN) model was established for estimating corn plant height, achieving optimal performance with an R² of 0.978 and a root mean square error (RMSE) of 2.709. For LAI estimation, a DNN model optimized using particle swarm optimization (PSO) was developed, yielding an R² of 0.931 and an RMSE of 0.130. KMI enables farmers and agronomists to monitor crop growth more accurately and in real-time. Finally, this study calculated the KMI by integrating the inversion results for plant height and LAI, providing an effective framework for crop growth assessment using satellite remote sensing data. This successfully enables remote sensing-based growth monitoring for the 2023 experimental field in Haicheng, making the precise monitoring and management of crop growth possible. Full article

This paper addresses the issue of the satellite image processing using GRASS GIS in the mangrove forests of the Niger River Delta, southern Nigeria. The estuary of the Niger River Delta in the Gulf of Guinea is an essential hotspot of biodiversity on the western coast of Africa. At the same time, climate issues and anthropogenic factors affect vulnerable coastal ecosystems and result in the rapid decline of mangrove habitats. This motivates monitoring of the vegetation patterns using advanced cartographic methods and data analysis. As a response to this need, this study aimed to calculate and map several vegetation indices (VI) using scripts as advanced programming methods integrated in geospatial studies. The data include four Landsat 8-9 OLI/TIRS images covering the western segment of the Niger River Delta in the Bight of Benin for 2013, 2015, 2021, and 2022. The techniques included the ’i.vi’, ’i.landsat.toar’ and other modules of the GRASS GIS. Based on the GRASS GIS ’i.vi’ module, ten VI were computed and mapped for the western segment of the Niger River Delta estuary: Atmospherically Resistant Vegetation Index (ARVI), Green Atmospherically Resistant Vegetation Index (GARI), Green Vegetation Index (GVI), Difference Vegetation Index (DVI), Perpendicular Vegetation Index (PVI), Global Environmental Monitoring Index (GEMI), Normalized Difference Water Index (NDWI), Second Modified Soil Adjusted Vegetation Index (MSAVI2), Infrared Percentage Vegetation Index (IPVI), and Enhanced Vegetation Index (EVI). The results showed variations in the vegetation patterns in mangrove habitats situated in the Niger River Delta over the last decade as well as the increase in urban areas (Onitsha, Sapele, Warri and Benin City) and settlements in the Delta State due to urbanization. The advanced techniques of the GRASS GIS of satellite image processing and analysis enabled us to identify and visualize changes in vegetation patterns. The technical excellence of the GRASS GIS in image processing and analysis was demonstrated in the scripts used in this study. Full article

As a basic agricultural parameter in the formation, transformation, and consumption of surface water resources, soil moisture has a very important influence on the vegetation growth, agricultural production, and healthy operation of regional ecosystems. The Aksu river basin is a typical semi-arid agricultural area which seasonally suffers from water shortage. Due to the lack of knowledge on soil moisture change, the water management and decision-making processes have been a difficult issue for local government. Therefore, soil moisture monitoring by remote sensing became a reasonable way to schedule crop irrigation and evaluate the irrigation efficiency. Compared to in situ measurements, the use of remote sensing for the monitoring of soil water content is convenient and can be repetitively applied over a large area. To verify the applicability of the typical drought index to the rapid acquisition of soil moisture in arid and semi-arid regions, this study simulated, compared, and validated the effectiveness of soil moisture inversion. GF-1 WFV images, Landsat 8 OLI images, and the measured soil moisture data were used to determine the Perpendicular Drought Index (PDI), the Modified Perpendicular Drought Index (MPDI), and the Vegetation Adjusted Perpendicular Drought Index (VAPDI). First, the determination coefficients of the correlation analyses on the PDI, MPDI, VAPDI, and measured soil moisture in the 0–10, 10–20, and 20–30 cm depth layers based on the GF-1 WFV and Landsat 8 OLI images were good. Notably, in the 0–10 cm depth layers, the average determination coefficient was 0.68; all models met the accuracy requirements of soil moisture inversion. Both indicated that the drought indices based on the Near Infrared (NIR)-Red spectral space derived from the optical remote sensing images are more sensitive to soil moisture near the surface layer; however, the accuracy of retrieving the soil moisture in deep layers was slightly lower in the study area. Second, in areas of vegetation coverage, MPDI and VAPDI had a higher inversion accuracy than PDI. To a certain extent, they overcame the influence of mixed pixels on the soil moisture spectral information. VAPDI modified by Perpendicular Vegetation Index (PVI) was not susceptible to vegetation saturation and, thus, had a higher inversion accuracy, which makes it performs better than MPDI’s in vegetated areas. Third, the spatial heterogeneity of the soil moisture retrieved by the GF-1 WFV and Landsat 8 OLI image were similar. However, the GF-1 WFV images were more sensitive to changes in the soil moisture, which reflected the actual soil moisture level covered by different vegetation. These results provide a practical reference for the dynamic monitoring of surface soil moisture, obtaining agricultural information and agricultural condition parameters in arid and semi-arid regions. Full article

Rapid and efficient assessment of cultivated land quality (CLQ) using remote sensing technology is of great significance for protecting cultivated land. However, it is difficult to obtain accurate CLQ estimates using the current satellite-driven approaches in the pressure-state-response (PSR) framework, owing to the limitations of linear models and CLQ spectral indices. In order to improve the estimation accuracy of CLQ, this study used four evaluation models (the traditional linear model; partial least squares regression, PLSR; back propagation neural network, BPNN; and BPNN with genetic algorithm optimization, GA-BPNN) to evaluate CLQ for determining the accurate evaluation model. In addition, the optimal satellite-derived indicator in the land state index was selected among five vegetation indices (the normalized vegetation index, NDVI; enhanced vegetation index, EVI; modified soil-adjusted vegetation index, MSAVI; perpendicular vegetation index, PVI; and soil-adjusted vegetation index, SAVI) to improve the prediction accuracy of CLQ. This study was conducted in Conghua District of Guangzhou, Guangdong Province, China, based on Gaofen-1 (GF-1) data. The prediction accuracies from the traditional linear model, PLSR, BPNN, and GA-BPNN were compared using observations. The results demonstrated that (1) compared with other models (the traditional linear model: R² = 0.14 and RMSE = 91.53; PLSR: R² = 0.33 and RMSE = 74.58; BPNN: R² = 0.50 and RMSE = 61.75), the GA-BPNN model based on EVI in the land state index provided the most accurate estimates of CLQ, with the R² of 0.59 and root mean square error (RMSE) of 56.87, indicating a nonlinear relationship between CLQ and the prediction indicator; and (2) the GA-BPNN-based evaluation approach of CLQ in the PSR framework was driven to map CLQ of the study area using the GF-1 data, leading to an RMSE of 61.44 at the regional scale, implying that the GA-BPNN-based evaluation approach has the potential to map CLQ over large areas. This study provides an important reference for the high-accuracy prediction of CLQ based on remote sensing technology. Full article

Spatial information of forest structural variables is crucial for sustainable forest management planning, forest monitoring, and the assessment of forest ecosystem productivity. We investigate a complex alpine forest ecosystem located in the Swiss National Park (SNP) and apply empirical models to retrieve the structural variables canopy closure, basal area, and timber volume at plot scale. We used imaging spectrometer (IS) data from the Airborne Prism EXperiment (APEX) in combination with in-situ measurements of forest structural variables to develop empirical models. These models are based on simple and stepwise multiple regressions, while all potential two narrow-band combinations of the Simple Ratio (SR), the Normalized Difference Vegetation Index (NDVI), the perpendicular vegetation index (PVI), the second soil-adjusted vegetation index (SAVI2), and band depth indices were tested. The accuracy of the estimated structural attributes was evaluated using a leave-one-out cross-validation technique. Using stepwise multiple regression models, we obtained a moderate to good accuracy when estimating canopy closure (R² = 0.81, rRMSE = 10%), basal area (R² = 0.68, rRMSE = 20%), and timber volume (R² = 0.73, rRMSE = 22%). We discuss the reliability of empirical approaches for estimates of canopy structural parameters considering the causality of light interaction and surface information. Full article

Spatial variability in a crop field creates a need for precision agriculture. Economical and rapid means of identifying spatial variability is obtained through the use of geotechnology (remotely sensed images of the crop field, image processing, GIS modeling approach, and GPS usage) and data mining techniques for model development. Higher-end image processing techniques are followed to establish more precision. The goal of this paper was to investigate the strength of key spectral vegetation indices for agricultural crop yield prediction using neural network techniques. Four widely used spectral indices were investigated in a study of irrigated corn crop yields in the Oakes Irrigation Test Area research site of North Dakota, USA. These indices were: (a) red and near-infrared (NIR) based normalized difference vegetation index (NDVI), (b) green and NIR based green vegetation index (GVI), (c) red and NIR based soil adjusted vegetation index (SAVI), and (d) red and NIR based perpendicular vegetation index (PVI). These four indices were investigated for corn yield during 3 years (1998, 1999, and 2001) and for the pooled data of these 3 years. Initially, Back-propagation Neural Network (BPNN) models were developed, including 16 models (4 indices * 4 years including the data from the pooled years) to test for the efficiency determination of those four vegetation indices in corn crop yield prediction. The corn yield was best predicted using BPNN models that used the means and standard deviations of PVI grid images. In all three years, it provided higher prediction accuracies, coefficient of determination (r²), and lower standard error of prediction than the models involving GVI, NDVI, and SAVI image information. The GVI, NDVI, and SAVI models for all three years provided average testing prediction accuracies of 24.26% to 94.85%, 19.36% to 95.04%, and 19.24% to 95.04%, respectively while the PVI models for all three years provided average testing prediction accuracies of 83.50% to 96.04%. The PVI pool model provided better average testing prediction accuracy of 94% with respect to other vegetation models, for which it ranged from 89–93%. Similarly, the PVI pool model provided coefficient of determination (r²) value of 0.45 as compared to 0.31–0.37 for other index models. Log₁₀ data transformation technique was used to enhance the prediction ability of the PVI models of years 1998, 1999, and 2001 as it was chosen as the preferred index. Another model (Transformed PVI (Pool)) was developed using the log₁₀ transformed PVI image information to show its global application. The transformed PVI models provided average corn yield prediction accuracies of 90%, 97%, and 98% for years 1998, 1999, and 2001, respectively. The pool PVI transformed model provided as average testing accuracy of 93% along with r² value of 0.72 and standard error of prediction of 0.05 t/ha. Full article