Search Results (7)

This study explores the mechanisms underlying the enhanced anti-wear and thermal fatigue performance of laser-treated bionic brake drums, aiming to extend their service life and improve design quality. Bionic brake drums treated with laser patterns—point, stripe, and grid—were tested with semi-metallic, non-asbestos organic (NAO), and ceramic brake pads. A mechanical model was developed to analyze wear performance, and bench tests were conducted to assess wear patterns. Thermal fatigue tests examined the impact of thermal cycling on the treated drums’ wear behavior. The results reveal that laser-treated bionic brake drums significantly outperformed untreated ones in both wear resistance and thermal fatigue. Among the treatments, the grid pattern showed the best wear performance, and thermal fatigue life was improved by 27% for the striped pattern and 38% for the grid pattern. The study concludes that laser treatment effectively enhances both wear resistance and thermal fatigue performance in bionic brake drums, especially for the grid pattern, offering valuable insights for future brake drum design. Full article

We investigated the effect of lepidocrocite-type layered titanate, which is compounded in brake pads, to reduce brake particle emissions. The dust reduction effect of titanate was evaluated using a small-scale inertial brake material friction test dynamometer. The results suggested that brake particle emissions are related to the microphysical structure of the pad surface, such as the uniformity of the friction film and secondary plateau formation, and that friction materials containing titanate contribute significantly to reducing both particle mass (PM) and particle number (PN) emissions of brake particles in both non-asbestos organic (NAO) and low-steel (LS) pads. In particular, LS pads generally have a problem of having more brake particles than NAO pads, but this study found that brake particles can be significantly reduced by compounding titanate instead of tin sulfide. Full article

Particulate Matter (PM) air pollution has been linked to major adverse health effects. Road transport still contributes significantly to ambient PM concentrations, but mainly due to the non-exhaust emissions from vehicles. For the first time worldwide, limits for non-exhaust emissions have been proposed by the European Union for the upcoming Euro 7 step. For these reasons, interest in brake emissions has increased in the past few years. Realistic emission factors are necessary to accurately calculate the contribution of brake emissions to air pollution but also to estimate the emissions reduction potential of new or existing technologies and improved brake formulations. This paper reviews emission factors from light-duty vehicles reported in the literature, with a focus on those that followed the recently introduced Global Technical Regulation (GTR 24) methodology on brakes in light-duty vehicles. Reduction efficiencies of non-asbestos organic (NAO) pads, brake dust filters, ceramic discs, coated discs, and regenerative braking are also discussed. Finally, the emission factors are compared with roadside measurements of brake emissions and emission inventories worldwide. The findings of this study can be used as an input in emission inventories to estimate the contribution of brakes to air pollution. Full article

Iron (Fe), the main component of non-exhaust particulates, is known to have variable health effects that depend on the chemical species of iron. This study characterized the possible contribution of iron oxides and hydroxides to airborne brake wear particles under realistic vehicle driving and braking conditions with different brake pad friction materials. We found significant differences in wear factors and PM₁₀ and PM_2.5 emissions between non-asbestos organic (NAO) and European performance (ECE) brake pads. Iron was the dominant contributor to PM₁₀ and PM_2.5 brake wear particles for both NAO and ECE. The iron concentration ratio in the particle mass (PM) was comparable to the disc-to-pads ratio measured by wear mass. The fact that magnetite, which is of interest with respect to health effects, was less abundant in NAO than in ECE suggested that tribo-oxidations occurred in NAO. Metallic iron is generated not only from abrasive wear but also from tribo-chemical reduction with magnetite as the starting material. We found that there were differences in PM emissions between brake friction materials, and that the phase transformations of iron differed between friction materials. These differences were apparent in the distribution of iron oxides and hydroxides. Heat, tribo-oxidation, and tribo-reduction are intricately involved in these reactions. Full article

In this study, two different dust collectors, one based on an inertial separator and the other based on an electrostatic precipitator (ESP), were developed in order to reduce brake wear particulate matter (PM) emissions. Additionally, the collection efficiencies for brake wear particles (BWPs) of the inertial separator and the ESP were evaluated according to brake pad type. In the case of the inertial separator, the BWP collection efficiencies for the low-metallic (LM) and non-asbestos organic (NAO) pads were similar, and the cut-off size at 50% collection efficiency (D50) was 2.2 µm. The ESP was designed without an additional electrostatic charging device because naturally induced electrostatic charging occurred due to the friction between the brake disc and pad. The BWP collection efficiency of the ESP was higher for NAO pad than for LM pad because the BWPs generated from the NAO pad contained a relatively low iron (Fe) component compared to that of the LM pad, thereby generating more frictional electricity. The maximum ESP collection efficiencies of the BWPs generated from the LM and NAO pads were determined to be 60% and 75%, respectively, and the remaining BWPs that were not collected were presumed to be particles that were not frictionally charged. Full article

Laser cladding is a promising surface treatment for refurbishing worn-out cast-iron brake rotors. Previous studies on laser-cladded brake rotors have demonstrated their extensively higher wear and greater airborne particle emissions, compared with traditional cast iron rotors. In order to overcome this, a commercial non-asbestos organic (NAO) brake material is tested against Fe-based laser-cladded and traditional cast-iron brake rotors. Two low-metallic brake pad materials are also tested as references. The materials’ coefficients of friction, specific wear rates and particle number concentrations are evaluated. The results indicate that the NAO brake material showed lower wear and had fewer particle emissions than the low-metallic brake materials when deployed against both cast iron and laser-cladded brake rotors. The NAO/laser-cladding friction pairing showed wear, particle concentration and fraction of fine particles (sub 1 μm) equivalent to those of the low-metallic/cast-iron friction pairing, creating significant potential for application in refurbishing worn-out cast-iron brake rotors. Full article

Copper appears to be an indispensable ingredient of non-asbestos organic (NAO) brake friction materials owing to its multifunctionality. However, recent findings proved it as a threat to aquatic life and efforts were initiated worldwide over the last few years to find a substitute for it. Recently, the authors’ group had reported on the potential of particulate Promaxon-D (hydrated calcium silicate), a porous material for enhancement of noise–vibration (NV) performance of Cu-free brake pads. It was felt necessary to investigate how Promaxon-D (PD) contributes to controlling tribo-performance of brake pads since this aspect is most important for the brake friction materials. A series of five types of brake pads was developed by keeping parent composition fixed and varying the theme ingredient PD content from 0–20 wt.%. The tribo-performance was evaluated on a full-scale brake inertia dynamometer as per the JASO C406 test standards. The increase in PD contents led to a reduction in density, hardness, and thermal conductivity while an increase in porosity and compressibility. With the increase in PD contents, almost all tribo properties such as average μ, fade ratio, and recovery ratio got enhanced, sensitivity of µ for pressure, speed, and temperature lowered but at the cost of wear resistance. Finally, the worn surfaces of pads and discs were observed under a scanning electron microscope equipped with energy dispersive X-ray (SEM-EDX) to find out the presence of various elements at the contact zone and to monitor specific topographical events responsible for wear mechanism. Full article