Search Results (6)

For photothermal therapy of cancer, it is necessary to find Ag @TiO₂ core-shell nanoparticles that can freely tune the resonance wavelength within the near-infrared biological window. In this paper, the finite element method and the size-dependent refractive index of metal nanoparticles were used to theoretically investigate the effects of the core material, core length, core aspect ratio, shell thickness, refractive index of the surrounding medium, and the particle orientation on the light absorption properties of Ag@TiO₂ core-shell nanospheroid and nanorod. The calculations show that the position and intensity of the light absorption resonance peaks can be freely tuned within the first and second biological windows by changing the above-mentioned parameters. Two laser wavelengths commonly used in photothermal therapy, 808 nm (first biological window) and 1064 nm (second biological window), were selected to optimize the core length and aspect ratio of Ag@TiO₂ core-shell nanospheroid and nanorod. It was found that the optimized Ag@TiO₂ core-shell nanospheroid has a stronger light absorption capacity at the laser wavelengths of 808 nm and 1064 nm. The optimized Ag@TiO₂ core-shell nanoparticles can be used as ideal therapeutic agents in photothermal therapy. Full article

Controlling the particle size as well as porosity and shape of silica nanoparticles is always a big challenge while tuning their properties. Here, we designed a cost-effective, novel, green synthetic method for the preparation of perforated hollow mesoporous silica nanoparticles (PHMS-1) using a very minute amount of cationic surfactant in o/w-type (castor oil in water) emulsion at room temperature. The grafting of Al(III) through post-synthetic modification onto this silica framework (PHMS-2, Si/Al ~20 atomic percentage) makes this a very efficient solid acid catalyst for the conversion of monosaccharides to 5-HMF. Brunauer–Emmett–Teller (BET) surface area for the pure silica and Al-doped mesoporous silica nanoparticles (MSNs) were found to be 866 and 660 m²g⁻¹, respectively. Powder XRD, BET and TEM images confirm the mesoporosity of these materials. Again, the perforated hollow morphology was investigated using scanning electron microscopic analysis. Al-doped hollow MSNs were tested for acid catalytic-biomass conversion reactions. Our results show that PHMS-2 has much higher catalytic efficiency than contemporary aluminosilicate frameworks (83.7% of 5-HMF yield in 25 min at 160 °C for fructose under microwave irradiation). Full article

In order to monitor the synthesis processes or characterize nanoparticles for application, a new method that allows in situ determination of the two-dimensional size distribution and concentration of Au-Ag alloy nanospheroids, based on their extinction spectrum, is developed. Non-negative Tikhonov regularization and T-matrix method were used to solve the inverse problem. The effects of the two-dimensional size steps, wavelength range, and measurement errors of extinction spectrum on the retrieval results were analyzed to verify the feasibility and accuracy of the retrieval algorithm. Through comparative analysis, the size steps and wavelength range that make the retrieval error smaller are found. After adding 0.1% random noise to the extinction spectrum, a small variation in the retrieval error of the mean size is observed. The results showed that the error of the mean size is smaller than 2% and the error of the concentration is smaller than 3%. This method is simple, fast, cheap, nondestructive, and can be done in situ during the growth process of nanoparticles. Full article

Gold nanoparticles have the potential to be used in biomedical applications from diagnostics to drug delivery. However, interactions of gold nanoparticles with different biomolecules in the cellular environment result in the formation of a “protein corona”—a layer of protein formed around a nanoparticle, which induces changes in the properties of nanoparticles. In this work we developed methods to reproducibly synthesize spheroidal and star-shaped gold nanoparticles, and carried out a physico-chemical characterization of synthesized anionic gold nanospheroids and gold nanostars through transmission electron microscopy (TEM), dynamic light scattering (DLS), zeta potential (ZP), nanoparticles tracking analysis (NTA), ultraviolet-visible (UV–Vis) spectroscopy and estimates of surface-enhanced Raman spectroscopy (SERS) signal enhancement ability. We analyzed how they interact with proteins after pre-incubation with bovine serum albumin (BSA) via UV–Vis, DLS, ZP, NTA, SERS, cryogenic TEM (cryo-TEM) and circular dichroism (CD) spectroscopy. The tests demonstrated that the protein adsorption on the particles’ surfaces was different for spheroidal and star shaped particles. In our experiments, star shaped particles limited the protein corona formation at SERS “hot spots”. This benefits the small-molecule sensing of nanostars in biological media. This work adds more understanding about protein corona formation on gold nanoparticles of different shapes in biological media, and therefore guides design of particles for studies in vitro and in vivo. Full article

Previous investigations devoted to the optimization of nonspherical gold nanoparticles for photothermal therapy (PTT) encountered two issues, namely, the appropriate selection of objective functions and the processing of particle random orientations. In this study, these issues were resolved, and accurate optimization results were obtained for the three typical nonspherical gold nanoparticles (nanospheroid, nanocylinder, and nanorod) by using the T-matrix method. The dependence of the optimization results on the excitation wavelength and the refractive index of tissue was investigated. Regardless of the excitation wavelength and tissue type, gold nanospheroids were found to be the most effective therapeutic agents for PTT. The light absorption ability of optimized nanoparticles could be enhanced by using a laser with a longer wavelength. Finally, the design tolerance for the different sizes of nanoparticles was provided. Full article

N,N-Bis(2-hydroxyethyl) alkylamide or fatty acid diethanolamides (FADs) were prepared from a variety of triglycerides using diethanolamine in the presence of different transition metal-doped CaO nanocrystalline heterogeneous catalysts. The Zn-doped Cao nanospheroids were found to be the most efficient heterogeneous catalyst, with complete conversion of natural triglycerides to fatty acid diethanolamide in 30 min at 90 °C. The Zn/CaO nanoparticles were recyclable for up to six reaction cycles and showed complete conversion even at room temperature. The amidation reaction of natural triglycerides was found to follow the pseudo-first-order kinetic model, and the first-order rate constant was calculated as 0.171 min⁻¹ for jatropha oil aminolysis. The activation energy (Ea) and pre-exponential factor (A) for the same reaction were found to be 47.8 kJ mol⁻¹ and 4.75 × 10⁸ min⁻¹, respectively. Full article