Search Results (56)

With the vigorous development of Internet of Things technologies, Cell-Free Radio Access Network (CF-RAN), leveraging its distributed coverage and single/multi-antenna Access Point (AP) coordination advantages, has become a key technology for supporting massive Machine-Type Communication (mMTC). However, under the grant-free random access mechanism, this network architecture faces the problem of information freshness degradation due to channel congestion. To address this issue, a joint decoding model based on logical grouping architecture is introduced to analyze the correlation between the successful packet transmission probability and the Peak Age of Information (PAoI) in both single-AP and multi-AP scenarios. On this basis, a global Particle Swarm Optimization (PSO) algorithm is designed to dynamically adjust the channel access probability to minimize the average PAoI across the network. To reduce signaling overhead, a PSO algorithm based on local topology information is further proposed to achieve collaborative optimization among neighboring APs. Simulation results demonstrate that the global PSO algorithm can achieve performance closely approximating the optimum, while the local PSO algorithm maintains similar performance without the need for global information. It is especially suitable for large-scale access scenarios with wide area coverage, providing an efficient solution for optimizing information freshness in CF-RAN. Full article

While the market for massive machine type communications (mMTC) is evolving at an unprecedented pace, the standardization bodies, including 3GPP, are lagging behind with standardization of truly 5G-grade cellular Internet-of-Things (CIoT) systems. As an intermediate solution, an early data transmission mechanisms encapsulating the data into the preambles has been recently proposed for 4G/5G Narrowband IoT (NB-IoT) technology. This mechanism is also expected to become a part of future CIoT systems. The aim of this paper is to propose a model for CIoT systems with and without early transmission functionality and assess the optimal distribution of resources at the random access and data transmission phases. To this end, the developed model captures both phases explicitly as well as different traffic composition in downlink and uplink directions. Our numerical results demonstrate that the use of early transmission functionality allows one to drastically decrease the delay of uplink packets by up to 20–40%, even in presence of downlink traffic sharing the same set of resources. However, it also affects the optimal share of resources allocated for random access and data transmission phases. As a result, the optimal performance of 5G mMTC technologies with or without early transmission mode can only be attained if the dynamic resource allocation is implemented. Full article

The evolution from 5G to 6G networks is driven by the need to meet the stringent requirements, i.e., ultra-reliable, low-latency, and high-throughput communication. The new services are called Further-Enhanced Mobile Broadband (feMBB), Extremely Reliable and Low-Latency Communications (ERLLCs), Ultra-Massive Machine-Type Communications (umMTCs), Massive Ultra-Reliable Low-Latency Communications (mURLLCs), and Mobile Broadband Reliable Low-Latency Communications (MBRLLCs). Network slicing emerges as a critical enabler in 6G, providing virtualized, end-to-end network segments tailored to diverse application needs. Despite its significance, existing datasets for slice selection are limited to 5G or LTE-A contexts, lacking relevance to the enhanced requirements. In this work, we present a novel synthetic dataset tailored to 6G network slicing. By analyzing the emerging service requirements, we generated traffic parameters, including latency, packet loss, jitter, and transfer rates. Machine Learning (ML) models like Random Forest (RF), Decision Tree (DT), XGBoost, Support Vector Machine (SVM), and Feedforward Neural Network (FNN) were trained on this dataset, achieving over 99% accuracy in both slice classification and handover prediction. Our results highlight the potential of this dataset as a valuable tool for developing AI-assisted 6G network slicing mechanisms. While still in its early stages, the dataset lays a foundation for future research. As the 6G standardization advances, we aim to refine the dataset and models, ultimately enabling real-time, intelligent slicing solutions for next-generation networks. Full article

Every year, about 1.19 million people are killed in traffic accidents; hence, the United Nations has a goal of halving the number of road traffic deaths and injuries by 2030. In line with this objective, technological innovations in telecommunication, particularly brought about by the rise of 5G networks, have contributed to the development of modern Vehicle-to-Everything (V2X) systems for communication. A New Radio V2X (NR-V2X) was introduced in the latest Third Generation Partnership Project (3GPP) releases which allows user devices to exchange information without relying on roadside infrastructures. This, together with Massive Machine Type Communication (mMTC) and Ultra-Reliable Low Latency Communication (URLLC), has led to the significantly increased reliability, coverage, and efficiency of vehicular communication networks. The use of artificial intelligence (AI), especially K-means clustering, has been very promising in terms of supporting efficient data exchange in vehicular ad hoc networks (VANETs). K-means is an unsupervised machine learning (ML) technique that groups vehicles located near each other geographically so that they can communicate with one another directly within these clusters while also allowing for inter-cluster communication via cluster heads. This paper proposes a multi-layered VANET-enabled Intelligent Transportation System (ITS) framework powered by unsupervised learning to optimize communication efficiency, scalability, and reliability. By leveraging AI in VANET solutions, the proposed framework aims to address road safety challenges and contribute to global efforts to meet the United Nations’ 2030 target. Additionally, this framework’s robust communication and data processing capabilities can be extended to eHealth monitoring systems, enabling real-time health data transmission and processing for continuous patient monitoring and timely medical interventions. This paper’s contributions include exploring AI-driven approaches for enhanced data interaction, improved safety in VANET-based ITS environments, and potential applications in eHealth monitoring. Full article

Massive multiple input multiple output (MIMO) enabled grant-free random access (mGFRA) stands out as a promising random access (RA) solution, thus effectively addressing the need for massive access in massive machine-type communications (mMTCs) while ensuring high spectral efficiency and minimizing signaling overhead. However, the bottleneck of mGFRA is mainly dominated by the orthogonal preamble collisions, since the orthogonal preamble pool is small and of a fixed-sized. In this paper, we explore the potential of non-orthogonal preambles to overcome limitations and enhance the success probability of mGFRA without extending the length of the preamble. Given the RA procedure of mGFRA, we analyze the factors influencing the success rate of mGFRA with non-orthogonal preamble and propose to use two types of sequences, namely Gold sequence and Gaussian distribution sequence, as the preambles for mGFRA. Simulation results demonstrate the effectiveness of these two types pf non-orthogonal preambles in improving the success probability of mGFRA. Moreover, the system parameters’ impact on the performance of mGFRA with non-orthogonal preambles is examined and deliberated. Full article

With the increasing demand for high data rates, low delay, and extended battery life, managing massive machine-type communication (mMTC) in the beyond 5G (B5G) context is challenging. MMTC devices, which play a role in developing the Internet of Things (IoT) and smart cities, need to transmit short amounts of data periodically within a specific time frame. Although blockchain technology is utilized for secure data storage and transfer while digital twin technology provides real-time monitoring and management of the devices, issues such as constrained time delays and network congestion persist. Without a proper data transmission strategy, most devices would fail to transmit in time, thus defying their relevance and purpose. This work investigates the problem of massive random access channel (RACH) attempts while emphasizing the energy efficiency and access latency for mMTC devices with critical missions in B5G networks. Using machine learning techniques, we propose an attention-based reinforcement learning model that orchestrates the device grouping strategy to optimize device placement. Thus, the model guarantees a higher probability of success for the devices during data transmission access, eventually leading to more efficient energy consumption. Through thorough quantitative simulations, we demonstrate that the proposed learning-based approach significantly outperforms the other baseline grouping methods. Full article

The expected huge number of connected devices in Internet of Things (IoT) applications characterizes the massive machine-type communication (mMTC) scenario, one prominent use case of beyond fifth-generation (B5G) systems. To meet mMTC connectivity requirements, grant-free (GF) random access (RA) protocols are seen as a promising solution due to the small amount of data that MTC devices usually transmit. In this paper, we propose a GF RA protocol based on a multi-agent reinforcement learning approach, applied to aid IoT devices in selecting the least congested RA pilots. The rewards obtained by the devices in collision cases resemble the congestion level of the chosen pilot. To enable the operation of the proposed method in a realistic B5G network scenario and aiming to reduce signaling overheads and centralized processing, the rewards in our proposed method are computed by the devices taking advantage of a large number of base station antennas. Numerical results demonstrate the superior performance of the proposed method in terms of latency, network throughput, and per-device throughput compared with other protocols. Full article

With the advent of 6G Narrowband IoT (NB-IoT) technology, IoT security faces inevitable challenges due to the application requirements of Massive Machine-Type Communications (mMTCs). In response, a 6G base station (gNB) and User Equipment (UE) necessitate increased capacities to handle a larger number of connections while maintaining reasonable performance during operations. To address this developmental trend and overcome associated technological hurdles, this paper proposes a hardware-accelerated and software co-designed mechanism to support streaming data transmissions and secure zero-trust inter-endpoint communications. The proposed implementations aim to offload processing efforts from micro-processors and enhance global system operation performance by hardware and software co-design in endpoint communications. Experimental results demonstrate that the proposed secure mechanism based on the use of non-repeating keys and implemented in FPGA, can save 85.61%, 99.71%, and 95.68% of the micro-processor’s processing time in key block generations, non-repeating checks, and data block transfers, respectively. Full article

The objective of this paper is to analyze economic alternatives for the provision of ultra-reliable low-latency communication (URLLC) and massive machine-type communication (mMTC) services over a fifth-generation (5G) network. Two business models, a monopoly and a duopoly, are studied and two 5G network scenarios are analyzed: a 5G network where the network resources are shared between the two services without service priority, and a 5G network with network slicing that allows for URLLC traffic to have a higher priority. Microeconomics is used to model the behavior of users and operators, and game theory is used to model the strategic interaction between users and operators. The results show that a monopoly over a 5G network with network slicing is the most efficient way to provide both URLLC and mMTC services. Full article

Network slicing shows promise as a means to endow 5G networks with flexible and dynamic features. Network function virtualization (NFV) and software-defined networking (SDN) are the key methods for deploying network slicing, which will enable end-to-end (E2E) isolation services permitting each slice to be customized depending on service requirements. The goal of this investigation is to construct network slices through a machine learning algorithm and allocate resources for the newly created slices using dynamic programming in an efficient manner. A substrate network is constructed with a list of key performance indicators (KPIs) like CPU capacity, bandwidth, delay, link capacity, and security level. After that, network slices are produced by employing multi-layer perceptron (MLP) using the adaptive moment estimation (ADAM) optimization algorithm. For each requested service, the network slices are categorized as massive machine-type communications (mMTC), enhanced mobile broadband (eMBB), and ultra-reliable low-latency communications (uRLLC). After network slicing, resources are provided to the services that have been requested. In order to maximize the total user access rate and resource efficiency, Dijkstra’s algorithm is adopted for resource allocation that determines the shortest path between nodes in the substrate network. The simulation output shows that the present model allocates optimum slices to the requested services with high resource efficiency and reduced total bandwidth utilization. Full article

The usage scenarios defined in the ITU-M2150-1 recommendation for IMT-2020 systems, including enhanced Mobile Broadband (eMBB), Ultra-reliable Low-latency Communication (URLLC), and massive Machine Type Communication (mMTC), allow the possibility of accessing different services through the set of Radio Interface Technologies (RITs), Long-term Evolution (LTE), and New Radio (NR), which are components of RIT. The potential of the low and medium frequency bands allocated by the Federal Communications Commission (FCC) for the fifth generation of mobile communications (5G) is described. In addition, in the Internet of Things (IoT) applications that will be covered by the case of use of the mMTC are framed. In this sense, a propagation channel measurement campaign was carried out at 850 MHz and 5.9 GHz in a covered corridor environment, located in an open space within the facilities of the Pedagogical and Technological University of Colombia campus. The measurements were carried out in the time domain using a channel sounder based on a Universal Software Radio Peripheral (USRP) to obtain the received signal power levels over a range of separation distances between the transmitter and receiver from 2.00 m to 67.5 m. Then, a link budget was proposed to describe the path loss behavior as a function of these distances to obtain the parameters for the close-in free space reference distance (CI) and the floating intercept (FI) path loss prediction models. These parameters were estimated from the measurements made using the Minimum Mean Square Error (MMSE) approach. The estimated path loss exponent (PLE) values for both the CI and FI path loss models at 850 MHz and 3.5 GHz are in the range of 2.21 to 2.41, respectively. This shows that the multipath effect causes a lack of constructive interference to the received power signal for this type of outdoor corridor scenario. These results can be used in simulation tools to evaluate the path loss behavior and optimize the deployment of device and sensor network infrastructure to enable 5G-IoT connectivity in smart university campus scenarios. Full article

Fifth-generation (5G) mobile networks have already marked their presence globally, revolutionizing entertainment, business, healthcare, and other domains. While this leap forward brings numerous advantages in speed and connectivity, it also poses new challenges for security protocols. Machine learning (ML) and deep learning (DL) have been employed to augment traditional security measures, promising to mitigate risks and vulnerabilities. This paper conducts an exhaustive study to assess ML and DL algorithms’ role and effectiveness within the 5G security landscape. Also, it offers a profound dissection of the 5G network’s security paradigm, particularly emphasizing the transformative role of ML and DL as enabling security tools. This study starts by examining the unique architecture of 5G and its inherent vulnerabilities, contrasting them with emerging threat vectors. Next, we conduct a detailed analysis of the network’s underlying segments, such as network slicing, Massive Machine-Type Communications (mMTC), and edge computing, revealing their associated security challenges. By scrutinizing current security protocols and international regulatory impositions, this paper delineates the existing 5G security landscape. Finally, we outline the capabilities of ML and DL in redefining 5G security. We detail their application in enhancing anomaly detection, fortifying predictive security measures, and strengthening intrusion prevention strategies. This research sheds light on the present-day 5G security challenges and offers a visionary perspective, highlighting the intersection of advanced computational methods and future 5G security. Full article

The emergence of the sixth generation of cellular systems (6G) signals a transformative era and ecosystem for mobile communications, driven by demands from technologies like the internet of everything (IoE), V2X communications, and factory automation. To support this connectivity, mission-critical applications are emerging with challenging network requirements. The primary goals of 6G include providing sophisticated and high-quality services, extremely reliable and further-enhanced mobile broadband (feMBB), low-latency communication (ERLLC), long-distance and high-mobility communications (LDHMC), ultra-massive machine-type communications (umMTC), extremely low-power communications (ELPC), holographic communications, and quality of experience (QoE), grounded in incorporating massive broad-bandwidth machine-type (mBBMT), mobile broad-bandwidth and low-latency (MBBLL), and massive low-latency machine-type (mLLMT) communications. In attaining its objectives, 6G faces challenges that demand inventive solutions, incorporating AI, softwarization, cloudification, virtualization, and slicing features. Technologies like network function virtualization (NFV), network slicing, and software-defined networking (SDN) play pivotal roles in this integration, which facilitates efficient resource utilization, responsive service provisioning, expanded coverage, enhanced network reliability, increased capacity, densification, heightened availability, safety, security, and reduced energy consumption. It presents innovative network infrastructure concepts, such as resource-as-a-service (RaaS) and infrastructure-as-a-service (IaaS), featuring management and service orchestration mechanisms. This includes nomadic networks, AI-aware networking strategies, and dynamic management of diverse network resources. This paper provides an in-depth survey of the wireless evolution leading to 6G networks, addressing future issues and challenges associated with 6G technology to support V2X environments considering presenting +challenges in architecture, spectrum, air interface, reliability, availability, density, flexibility, mobility, and security. Full article

One of the critical use cases for prospective fifth generation (5G) cellular systems is the delivery of the state of the remote systems to the control center. Such services are relevant for both massive machine-type communications (mMTC) and ultra-reliable low-latency communications (URLLC) services that need to be supported by 5G systems. The recently introduced the age of information (AoI) metric representing the timeliness of the reception of the update at the receiver is nowadays commonly utilized to quantify the performance of such services. However, the metric itself is closely related to the queueing theory, which conventionally requires strict assumptions for analytical tractability. This review paper aims to: (i) identify the gaps between technical wireless systems and queueing models utilized for analysis of the AoI metric; (ii) provide a detailed review of studies that have addressed the AoI metric; and (iii) establish future research challenges in this area. Our major outcome is that the models proposed to date for the AoI performance evaluation and optimization deviate drastically from the technical specifics of modern and future wireless cellular systems, including those proposed for URLLC and mMTC services. Specifically, we identify that the majority of the models considered to date: (i) do not account for service processes of wireless channel that utilize orthogonal frequency division multiple access (OFDMA) technology and are able to serve more than a single packet in a time slot; (ii) neglect the specifics of the multiple access schemes utilized for mMTC communications, specifically, multi-channel random access followed by data transmission; (iii) do not consider special and temporal correlation properties in the set of end systems that may arise naturally in state monitoring applications; and finally, (iv) only few studies have assessed those practical use cases where queuing may happen at more than a single node along the route. Each of these areas requires further advances for performance optimization and integration of modern and future wireless provisioning technologies with mMTC and URLLC services. Full article

The 5G network is designed to serve three main use cases: enhanced mobile broadband (eMBB), massive machine-type communications (mMTC), and ultra-reliable and low-latency communications (uRLLC). There are many new technological enablers, including the cloud radio access network (C-RAN) and network slicing, that can support 5G and meet its requirements. The C-RAN combines both network virtualization and based band unit (BBU) centralization. Using the network slicing concept, the C-RAN BBU pool can be virtually sliced into three different slices. 5G slices require a number of Quality of service (QoS) metrics, such as average response time and resource utilization. In order to enhance the C-RAN BBUs utilization while protecting the minimum QoS of the coexisting three slices, a priority-based resource allocation with queuing model is proposed. The uRLLC is given the highest priority, while eMBB has a higher priority than mMTC services. The proposed model allows the eMBB and mMTC to be queued and the interrupted mMTC to be restored in its queue to increase its chance to reattempt the service later. The proposed model’s performance measures are defined and derived using a continuous-time Markov chain (CTMC) model and evaluated and compared using different methodologies. Based on the results, the proposed scheme can increase C-RAN resource utilization without degrading the QoS of the highest-priority uRLLC slice. Additionally, it can reduce the forced termination priority of the interrupted mMTC slice by allowing it to re-join its queue. Therefore, the comparison of the results shows that the proposed scheme outperforms the other states of the art in terms of improving the C-RAN utilization and enhancing the QoS of eMBB and mMTC slices without degrading the QoS of the highest priority use case. Full article