Search Results (5)

The maritime industry remains a significant contributor to global greenhouse gas (GHG) emissions. In this article, a systematic study has been performed on the alternative fuel emissions of large cargo ships under different route scenarios and propulsion systems. For this purpose, a set of key performance indicators (KPIs) are evaluated, including total equivalent CO₂ emissions (CO_2eq), CO_2eq emissions per unit of transport mass and CO_2eq emissions per unit of transport mass per distance. The emissions analysis demonstrates that Liquified Natural Gas (LNG) paired with Marine Gas Oil (MGO) emerges as the most viable short-term solution in comparison with the conventional fuel oil propulsion. Synthetic methanol (eMeOH) paired with synthetic diesel (eDiesel) is identified as the most promising long-term fuel combination. When comparing the European Union (EU) emission calculation system (FuelEU) with the International Maritime Organization (IMO) emission metrics, a discrepancy in emissions reduction outcomes has been observed. The IMO approach appears to favor methanol (MeOH) and liquefied natural gas (LNG) over conventional fuel oil. This is attributed to the fact that the IMO metrics do not consider unburned methane emissions (methane slip) and emissions in the production of fuels (Well-to-Tank). Full article

The 2030 Climate target plan of the European Commission (EC) establishes a greenhouse gases (GHG) emissions reduction target of at least 55% by 2030, compared to 1990. It highlights that all transport modes—road, rail, aviation and waterborne—will have to contribute to this aim. A smart combination of vehicle/vessel/aircraft efficiency improvements, as well as fuel mix changes, are among the measures that can reduce GHG emissions, reducing at the same time noise pollution and improving air quality. This research provides a comprehensive analysis of recent research and innovation in low-emission alternative energy for transport (excluding hydrogen) in selected European Union (EU)-funded projects. It considers the latest developments in the field, identifying relevant researched technologies by fuel type and their development phase. The results show that liquefied natural gas (LNG) refueling stations, followed by biofuels for road transport and alternative aviation fuels, are among the researched technologies with the highest investments. Methane-based fuels (e.g., compressed natural gas (CNG), LNG) have received the greatest attention concerning the number of projects and the level of funding. By contrast, liquefied petroleum gas (LPG) only has four ongoing projects. Alcohols, esters and ethers, and synthetic paraffinic and aromatic fuels (SPF) are in between. So far, road transport has the highest use of alternative fuels in the transport sector. Despite the financial support from the EU, advances have yet to materialize, suggesting that EU transport decarbonization policies should not consider a radical or sudden change, and therefore, transition periods are critical. It is also noteworthy that there is no silver bullet solution to decarbonization and thus the right use of the various alternative fuels available will be key. Full article

Time mismatch between renewable energy production and consumption, grid congestion issues, and consequent production curtailment lead to the need for energy storage systems to allow for a greater renewable energy sources share in future energy scenarios. A power-to-liquefied synthetic natural gas system can be used to convert renewable energy surplus into fuel for heavy duty vehicles, coupling the electric and transportation sectors. The investigated system originates from power-to-gas technology, based on water electrolysis and CO₂ methanation to produce a methane rich mixture containing H₂, coupled with a low temperature gas upgrading section to meet the liquefied natural gas requirements. The process uses direct air CO₂ capture to feed the methanation section; mol sieve dehydration and cryogenic distillation are implemented to produce a liquefied natural gas quality mixture. The utilization of this fuel in heavy duty vehicles can reduce greenhouse gases emissions if compared with diesel and natural gas, supporting the growth of renewable fuel consumption in an existing market. Here, the application of power-to-liquefied synthetic natural gas systems is investigated at a national level for Italy by 2040, assessing the number of plants to be installed in order to convert the curtailed energy, synthetic fuel production, and consequent avoided greenhouse gases emissions through well-to-wheel analysis. Finally, plant investment cost is preliminarily investigated. Full article

Synthetic natural gas (SNG) production from coal is one of the well-matured options to make clean utilization of coal a reality. For the ease of transportation and supply, liquefaction of SNG is highly desirable. In the liquefaction of SNG, efficient removal of low boiling point impurities such as hydrogen (H₂) and nitrogen (N₂) is highly desirable to lower the power of the liquefaction process. Among several separation processes, membrane-based separation exhibits the potential for the separation of low boiling point impurities at low power consumption as compared to the existing separation processes. In this study, the membrane unit was used to simulate the membrane module by using Aspen HYSYS V10 (Version 10, AspenTech, Bedford, MA, United States). The two-stage and two-step system designs of the N₂-selective membrane are utilized for SNG separation. The two-stage membrane process feasibly recovers methane (CH₄) at more than 95% (by mol) recovery with a H₂ composition of ≤0.05% by mol, but requires a larger membrane area than a two-stage system. While maintaining the minimum internal temperature approach value of 3 °C inside a cryogenic heat exchanger, the optimization of the SNG liquefaction process shows a large reduction in power consumption. Membrane-assisted removal of H₂ and N₂ for the liquefaction process exhibits the beneficial removal of H₂ before liquefaction by achieving low net specific power at 0.4010 kW·h/kg·_CH4. Full article

The aim of this publication is to review the current state and possibilities of developing electromobility and alternative fuels in Poland. It was found that the current market for alternative fuels in Poland is insufficiently developed. At the end of 2019 in Poland, liquefied petroleum gas-powered cars accounted for approximately 3.3 million pieces, which amounts to 14.3% all passenger vehicles up to 3.5 tonnes of gross vehicle weight. There were over 9000 electric cars on the road, the share of which accounted for 0.04% of domestic passenger transport. The lack of a sufficient number of charging points, inhibiting the development of electromobility, was also noted. There were approximately 4000 (0.02%) passenger cars powered by compressed natural gas. Liquefied gas-powered vehicles were exclusively public transport vehicles or trucks. The share of biofuels in the Polish transport sector stands at 4%, while European Union requirements are at a level of 10%. Although there is huge potential for the use of hydrogen as an alternative to conventional transport fuels in Poland, just one hydrogen-powered vehicle has been registered in the country so far, with no filling station in existence for this fuel. The synthetic fuel sector is in the planning stage. Full article