Search Results (8)

This study presents a theoretical investigation into the photovoltaic efficiency of InGaN/GaN quantum well-based intermediate band solar cells (IBSCs) under the simultaneous influence of electric and magnetic fields. The finite element method is employed to numerically solve the one-dimensional Schrödinger equation within the framework of the effective-mass approximation. Our findings reveal that electric and magnetic fields significantly influence the energy levels of electrons and holes, optical transition energies, open-circuit voltages, short-circuit currents, and overall photovoltaic conversion performances of IBSCs. Furthermore, this research indicates that applying a magnetic field positively influences conversion efficiency. Through the optimization of IBSC parameters, an efficiency of approximately 50% is achievable, surpassing the conventional Shockley–Queisser limit. This theoretical study demonstrates the potential for next-generation photovoltaic technology advancements. Full article

Quantum dot (QD)-based solar cells have been the focus of extensive research. One of the critical challenges in this field is optimizing the size and placement of QDs within the cells to enhance light absorption and overall efficiency. This paper theoretically investigates InAs/GaAs QD intermediate band solar cells (QD-IBSC) employing cylindrical QDs. The goal is to explore factors affecting light absorption and efficiency in QD-IBSC, such as the positioning of QDs, their dimensions, and the spacing (pitch) between the centers of adjacent dots. Achieving optimal values to enhance cell efficiency involves modifying and optimizing these QD parameters. This study involves an analysis of more than 500 frequency points to optimize parameters and evaluate efficiency under three distinct conditions: output power optimization, short-circuit current optimization, and generation rate optimization. The results indicate that optimizing the short-circuit current leads to the highest efficiency compared to the other conditions. Under optimized conditions, the efficiency and current density increase to 34.3% and 38.42 mA/cm², respectively, representing a remarkable improvement of 15% and 22% compared to the reference cell. Full article

This paper presents a thorough numerical investigation focused on optimizing the efficiency of quantum-well intermediate-band solar cells (QW-IBSCs) based on III-nitride materials. The optimization strategy encompasses manipulating confinement potential energy, controlling hydrostatic pressure, adjusting compositions, and varying thickness. The built-in electric fields in (In, Ga)N alloys and heavy-hole levels are considered to enhance the results’ accuracy. The finite element method (FEM) and Python 3.8 are employed to numerically solve the Schrödinger equation within the effective mass theory framework. This study reveals that meticulous design can achieve a theoretical photovoltaic efficiency of quantum-well intermediate-band solar cells (QW-IBSCs) that surpasses the Shockley–Queisser limit. Moreover, reducing the thickness of the layers enhances the light-absorbing capacity and, therefore, contributes to efficiency improvement. Additionally, the shape of the confinement potential significantly influences the device’s performance. This work is critical for society, as it represents a significant advancement in sustainable energy solutions, holding the promise of enhancing both the efficiency and accessibility of solar power generation. Consequently, this research stands at the forefront of innovation, offering a tangible and impactful contribution toward a greener and more sustainable energy future. Full article

The intermediate-band solar cell (IBSC) has been proposed as a high-efficiency solar cell because of the extended absorption it allows for, which results from the intermediate band. In order to further increase the efficiency of IBSCs, we study a novel device with dual intermediate bands. Because of the extended absorption from the second intermediate band, the efficiency of a dual IBSC can reach 86.5% at a full concentration. Moreover, we study the performance of the IBSC based on InAs/InGaAs quantum dots. The efficiency of the device is shown to be able to reach 74.4% when the In composition is 75%. In addition, the transition process between the dual intermediate bands greatly affects the efficiency, so it is important to design the dual intermediate bands in a precise manner. Full article

Solar cells that are based on the implementation of quantum dots in the intrinsic region, so-called intermediate band solar cells (IBSCs), are among the most widely used concepts nowadays for achieving high solar conversion efficiency. The principal characteristics of such solar cells relate to their ability to absorb low energy photons to excite electrons through the intermediate band, allowing for conversion efficiency exceeding the limit of Shockley–Queisser. IBSCs are generating considerable interest in terms of performance and environmental friendliness. However, there is still a need for optimizing many parameters that are related to the solar cells, such as the size of quantum dots, their shape, the inter-dot distance, and choosing the right material. To date, most studies have only focused on studying IBSC composed of cubic shape of quantum dots. The main objective of this study is to extend the current knowledge of IBSC. Thus, we analyze the effect of the shape of the quantum dot on the electronic and photonic characteristics of indium nitride and indium gallium nitride multiple quantum dot solar cells structure considering cubic, spherical, and cylindrical quantum dot shapes. The ground state of electrons and holes energy levels in quantum dot are theoretically determined by considering the Schrödinger equation within the effective mass approximation. Thus, the inter and intra band transitions are determined for different dot sizes and different inter dot spacing. Consequently, current–voltage (J-V) characteristic and efficiencies of these devices are evaluated and compared for different shapes. Our calculations show that, under fully concentrated light, for the same volume of different quantum dots (QD) shapes and a well determined In-concentration, the maximum of the photovoltaic conversion efficiencies reaches 63.04%, 62.88%, and 62.43% for cubic, cylindrical, and spherical quantum dot shapes, respectively. Full article

From the viewpoint of band engineering, the use of GaSb quantum nanostructures is expected to lead to highly efficient intermediate-band solar cells (IBSCs). In IBSCs, current generation via two-step optical excitations through the intermediate band is the key to the operating principle. This mechanism requires the formation of a strong quantum confinement structure. Therefore, we focused on the material system with GaSb quantum nanostructures embedded in AlGaAs layers. However, studies involving crystal growth of GaSb quantum nanostructures on AlGaAs layers have rarely been reported. In our work, we fabricated GaSb quantum dots (QDs) and quantum rings (QRs) on AlGaAs layers via molecular-beam epitaxy. Using the Stranski–Krastanov growth mode, we demonstrated that lens-shaped GaSb QDs can be fabricated on AlGaAs layers. In addition, atomic force microscopy measurements revealed that GaSb QDs could be changed to QRs under irradiation with an As molecular beam even when they were deposited onto AlGaAs layers. We also investigated the suitability of GaSb/AlGaAs QDSCs and QRSCs for use in IBSCs by evaluating the temperature characteristics of their external quantum efficiency. For the GaSb/AlGaAs material system, the QDSC was found to have slightly better two-step optical excitation temperature characteristics than the QRSC. Full article

It is necessary to devise innovative techniques to design new high-performance tandem solar cells to meet increasing energy needs. In this study, the theoretical efficiency of intermediate band solar cells (IBSCs) was increased by integrating them with tandem solar cells to produce intermediate band tandem solar cells (IBTSCs). The spectral splitting analysis indicated that the efficient absorption of sub-photon energies was necessary to ensure optimal performance of the IBSCs at each junction of the IBTSC. For this calculation, we assumed all absorption of sub-photon energies are unity. In addition, we applied the variation of absorptivity to the detailed balance limit of a double-junction (DJ) IBTSC. Furthermore, we included the impact of series and shunt resistances of a typical DJ IBTSC to investigate the variations in electrical parameters (short circuit current, open circuit voltage). The performance efficiency also depended on the illumination concentration due to the charge carrier transitions at each junction. We analyzed this aspect to determine the overall performance of the IBTSCs. We replaced the IBSC in the bottom junction with a single-junction solar cell to explore the potential of diverse tandem configurations. DJ IBTSCs achieved a limiting efficiency comparable to that of six-junction solar cells, despite the lower number of junctions. It was challenging for these cells to exhibit optimal performance because of the inefficient spectrum management in the bottom junction. It was concluded that full illumination concentration was required to achieve optimal performance in both junctions of the IBTSC. Full article

Intermediate band solar cells (IBSCs) have an efficiency limit of 63.2%, which is significantly higher than the 40.7% limit for conventional single gap solar cells. In order to achieve the maximum efficiency, the total bandgap of the cell should be in the range of ~2 eV. However, that fact does not prevent other cells based on different semiconductor bandgaps from benefiting from the presence of an intermediate band (IB) within their bandgap. Since silicon (1.12 eV bandgap) is the dominant material in solar cell technology, it is of interest to determine the limit efficiency of a silicon IBSC, because even a modest gain in efficiency could trigger a large commercial interest if the IB is implemented at low cost. In this work we study the limit efficiency of silicon-based IBSCs considering operating conditions that include the use of non-ideal photon casting between the optical transitions, different light intensities and Auger recombination. The results lead to the conclusion that a silicon IBSC, operating under the conventional model in which the sub-bandgaps add to the total silicon gap, provides an efficiency gain if operated in the medium-high concentration range. The performance of these devices is affected by Auger recombination only under extremely high concentrations. Full article