Search Results (8)

Significant progress has been achieved in the development of superabsorbent polymers (SAPs), focusing on enhancing their performance and expanding their applications. Efforts are particularly directed at increasing water absorbency while promoting environmental sustainability. Biodegradable materials such as starch and potassium humate have been successfully integrated with SAPs for desert greening, improving water retention, salt resistance, and seedling survival. The inclusion of nutrient-rich organic-inorganic composites further enhances the durability, efficiency, and recyclability of SAPs. In drought mitigation, polymeric absorbent resins such as polyacrylamide and starch-grafted acrylates have shown efficacy in ameliorating soil conditions and fostering plant growth. In arid environments, agents enriched with humic acid and bentonite contribute to improved soil aeration and water retention, creating optimal conditions for plant establishment. Additionally, the adoption of innovative waste management solutions has led to the production of amphiphilic SAPs from residual sludge, effectively addressing soil nutrient deficiencies and environmental pollution. In the food industry, SAPs containing protease, tea polyphenols, and chitosan exhibit potential for enhancing the stability and quality of seafood products. These advancements highlight the growing relevance of structural optimization approaches in SAP development across diverse applications and underline the importance of continued innovation in these fields. As novel materials emerge and environmental challenges intensify, the potential applications of SAPs are anticipated to expand significantly. Full article

Pharmaceuticals are used to improve the lives of people across the globe. The high demand for their fabrication and use causes a very serious environmental threat since their presence is ubiquitous in aqueous matrices. For this reason, the synthesis, characterisation, and efficiency of three chitosan-based materials to eliminate pharmaceutical mixtures from aqueous solutions were examined in the present study. The target mixture comprised seven widely used drugs: carbamazepine, cyclophosphamide, adefovir, levofloxacin, metronidazole, glibenclamide, and trimethoprim. The grafting of poly(ethylene imine) and poly(acrylamide) on the chitosan structure allowed its physical characteristics to be controlled. An adsorption assessment was performed at different pH values, and it was concluded that pH = 4 was the optimum value. The adsorption kinetics revealed that the adsorption of a drug mixture involves a combination of physical and chemical adsorption. The adsorption process appeared to be finished after 1 h for all compounds of the studied mixture, with CS-AMI exhibiting the fastest kinetics. Mass adsorption experiments were also carried out to determine its effects. Overall, the grafting process significantly increased the adsorption capacity over the pristine material. Specifically, the highest capacity increase for CS-PEI was ~220% for carbamazepine, and for CS-AMI, it was 158% for trimethoprim. FT-IR, SEM, and XRD were used for the characterisation of the polymers. Based on the findings, the three materials are suggested as very effective adsorbents for the elimination of medicine residues from aqueous matrices. Full article

Superabsorbent polymers are new functional polymeric materials that can absorb and retain liquids thousands of times their masses. This paper reviews the synthesis and modification methods of different superabsorbent polymers, summarizes the processing methods for different forms of superabsorbent polymers, and organizes the applications and research progress of superabsorbent polymers in industrial, agricultural, and biomedical industries. Synthetic polymers like polyacrylic acid, polyacrylamide, polyacrylonitrile, and polyvinyl alcohol exhibit superior water absorption properties compared to natural polymers such as cellulose, chitosan, and starch, but they also do not degrade easily. Consequently, it is often necessary to modify synthetic polymers or graft superabsorbent functional groups onto natural polymers, and then crosslink them to balance the properties of material. Compared to the widely used superabsorbent nanoparticles, research on superabsorbent fibers and gels is on the rise, and they are particularly notable in biomedical fields like drug delivery, wound dressing, and tissue engineering. Full article

Robust conductive hydrogels are in great demand for the practical applications of smart soft robots, epidermal electronics, and human–machine interactions. We successfully prepared nanoparticles enhanced polyacrylamide/hydroxypropyl guar gum/acryloyl-grafted chitosan quaternary ammonium salt/calcium ions/SiO₂ nanoparticles (PHC/Ca²⁺/SiO₂ NPs) conductive hydrogels. Owing to the stable chemical and physical hybrid crosslinking networks and reversible non-covalent interactions, the PHC/Ca²⁺/SiO₂ NPs conductive hydrogel showed good conductivity (~3.39 S/m), excellent toughness (6.71 MJ/m³), high stretchability (2256%), fast self-recovery (80% within 10 s, and 100% within 30 s), and good fatigue resistance. The maximum gauge factor as high as 66.99 was obtained, with a wide detectable strain range (from 0.25% to 500% strain), the fast response (25.00 ms) and recovery time (86.12 ms), excellent negligible response hysteresis, and good response stability. The applications of monitoring the human’s body movements were demonstrated, such as wrist bending and pulse tracking. Full article

In this work, the transformation of chitosan-grafted-polyacrylamide (GPAM) aggregates in aqueous solution upon heating was explored by cryo-electron microscope (cryo-TEM) and dynamic light scattering (DLS), and larger aggregates were formed in GPAM aqueous solution upon heating, which were responsible for the thermo-thickening behavior of GPAM aqueous solution during the heating process. The heating initiates a transformation from H-bonding aggregates to a large-sized cluster formed by self-assembled hydrophobic chitosan backbones. The acetic acid (HAc) concentration has a significant effect on the thermo-thickening behavior of GPAM aqueous solution; there is a critical value of the concentration (>0.005 M) for the thermo-thickening of 10 mg/mL GPAM solution. The concentration of HAc will affect the protonation degree of GPAM, and affect the strength of the electrostatic repulsion between GPAM molecular segments, which will have a significant effect on the state of the aggregates in solution. Other factors that have an influence on the thermo-thickening behavior of GPAM aqueous solution upon heating were investigated and discussed in detail, including the heating rate and shear rate. Full article

Dyes are classified as one of the major pollutants of water. They have negative impacts not only on environment but also on human health. In fact, wastewater that contains these harmful substances requires many types of treatments. Therefore, alternative methods and adsorption agents are needed. Herein, we propose to evaluate the decolorization of methylene blue (MB) and methyl orange (MO) as two models of soluble dyes from water using chitin and chitosan-graft-polyacrylamide. Furthermore, the applicability of these biomacromolecules as alternative adsorption agents, their sticking probability and desorption were also examined. Experimental parameters such as dye concentration, contact time, pH solution, adsorbent dosage and temperature were thoroughly examined for the grafted chitosan and chitin. The activation energy ( $E_a$ ) and the thermodynamic variables (i.e., standard Gibb’s free energy ( $\Delta G^0$ ), standard enthalpy ( $\Delta H^0$ ), and standard entropy ( $\Delta S^0$ )) were determined using the Van’t Hoff and Arrhenius equations. The sticking probability ( $S$ *) model for MB and MO removal by chitin and the chitosan derivative demonstrated that both dyes were successfully removed under the proposed conditions. Desorption studies of MB and MO showed the reusability of both materials, suggesting their application for removing dyes from aqueous solution. Full article

The ampholytic chitosan based flocculant carboxylated chitosan graft-(3-chloro-2-hydroxypropyl) trimethylammonium chloride-dimethyl diallyl ammonium chloride (CPCTS-g-P (CTA-DMDAAC)) was synthesized by photo polymerization using carboxylated chitosan (CPCTS), 3-chloro-2-chloropropyltrimethylammonium chloride (CTA) and dimethyldiallylammonium chloride (DMDAAC) as the cationic co-monomers. The effects of monomer concentration, the ratio of CPCTS and cationic monomers, cationic degree, initiator time, photoinitiator concentration, and pH value on the properties of CPCTS-g-P (CTA-DMDAAC) were studied. The microcystis aeruginosa that was cultured in laboratory was used for CPCTS-g-P (CTA-DMDAAC) flocculation tests. The effects of CPCTS-g-P (CTA-DMDAAC) dosage, pH value and G value on flocculation performance were investigated. The maximum removal rate of chlorophyll-a (Chl-a) and chemical oxygen demand (COD) that were obtained by CPCTS-g-P (CTA-DMDAAC) were 98.8% and 96.5% under the conditions of dosage 4 mg/L, pH 7 and G value 200 s⁻¹, respectively. The flocculation experiments showed that chitosan-based flocculant CPCTS-g-P (CTA-DMDAAC) had better flocculation performance than commercially available flocculants cationic polyacrylamide (CPAM), Polyferric Sulfate (PFS), and polymeric aluminium (PAC). Full article

Macroporous polyacrylamide-grafted-chitosan scaffolds for neural tissue engineering were fabricated with varied synthetic and viscosity profiles. A novel approach and mechanism was utilized for polyacrylamide grafting onto chitosan using potassium persulfate (KPS) mediated degradation of both polymers under a thermally controlled environment. Commercially available high molecular mass polyacrylamide was used instead of the acrylamide monomer for graft copolymerization. This grafting strategy yielded an enhanced grafting efficiency (GE = 92%), grafting ratio (GR = 263%), intrinsic viscosity (IV = 5.231 dL/g) and viscometric average molecular mass (MW = 1.63 × 10⁶ Da) compared with known acrylamide that has a GE = 83%, GR = 178%, IV = 3.901 dL/g and MW = 1.22 × 10⁶ Da. Image processing analysis of SEM images of the newly grafted neurodurable scaffold was undertaken based on the polymer-pore threshold. Attenuated Total Reflectance-FTIR spectral analyses in conjugation with DSC were used for the characterization and comparison of the newly grafted copolymers. Static Lattice Atomistic Simulations were employed to investigate and elucidate the copolymeric assembly and reaction mechanism by exploring the spatial disposition of chitosan and polyacrylamide with respect to the reactional profile of potassium persulfate. Interestingly, potassium persulfate, a peroxide, was found to play a dual role initially degrading the polymers—“polymer slicing”—thereby initiating the formation of free radicals and subsequently leading to synthesis of the high molecular mass polyacrylamide-grafted-chitosan (PAAm-g-CHT)—“polymer complexation”. Furthermore, the applicability of the uniquely grafted scaffold for neural tissue engineering was evaluated via PC12 neuronal cell seeding. The novel PAAm-g-CHT exhibited superior neurocompatibility in terms of cell infiltration owing to the anisotropic porous architecture, high molecular mass mediated robustness, superior hydrophilicity as well as surface charge due to the acrylic chains. Additionally, these results suggested that the porous PAAm-g-CHT scaffold may act as a potential neural cell carrier. Full article