Search Results (7)

Novel core–shell magnetic molecularly imprinted polymers (MMIPs) were synthesized using the sol–gel method for the adsorption of cefixime (CFX). Fe₃O₄@SiO₂ is the core, and molecularly imprinted polymers (MIPs) are the shell, which can selectively interact with CFX. The preparation conditions, adsorption kinetics, adsorption isotherms, selective adsorption ability, and reutilization performance of the MMIPs were investigated. The adsorption capacity of MMIPs for CFX was 111.38 mg/g, which was about 3.5 times that of MNIPs. The adsorption equilibrium time was 180 min. The dynamic adsorption experiments showed that the adsorption process of MMIPs to CFX conformed to the pseudo-second-order model. Through static adsorption study, the Scatchard analysis showed that MMIPs had two types of binding sites—the high-affinity binding sites and the low-affinity binding sites—while the Langmuir model fit the adsorption isotherms well (R² = 0.9962). Cefepime and ceftiofur were selected as the structural analogs of CFX for selective adsorption studies; the adsorption of CFX by MMIPs was higher than that of other structural analogs; and the imprinting factors of CFX, cefepime, and ceftiofur were 3.5, 1.7, and 1.4, respectively. Furthermore, the MMIPs also showed excellent reusable performance. Full article

Nowadays, hospital wastewater contains a high concentration of toxic pharmaceutical contaminants, posing a significant threat to the environment, and human and animal life. Cefixime (CFX) is one such toxic contaminant that has a detrimental impact on both aquatic and terrestrial ecosystems. Therefore, it is essential to remove this compound using non-toxic and environmentally friendly procedures to ensure healthy drinking water. In this study, a low-cost and eco-friendly nano adsorbent (nZVI/copper slag) was synthesized and characterized using FESEM, XRD, EDX, FTIR, and zeta potential to remove CFX from wastewater. The Response Surface Methodology (RSM) was used to evaluate the effects of experimental factors including adsorbent dosage (2–10 g/L), pollutant concentration (10–30 mg/L), pH (2–10), and contact time (10–50 min) for efficient CFX elimination. The optimal conditions (adsorbent dosage: 7.79 g/L, pollutant concentration: 19.42 mg/L, pH: 4.59, and reaction time: 36.17 min) resulted in 98.71% CFX removal. The adsorption isotherm and kinetics data showed that the pseudo-second-order kinetics and Langmuir isotherm models were appropriate for CFX elimination. Furthermore, the nano adsorbent demonstrated 90% CFX elimination after up to six repeated cycles in regeneration and reusability testing. Finally, the nZVI/CS nano adsorbent can be an effective and promising solution for removing CFX from wastewater. Full article

Background: Cefixime (CFX) belongs to a group of third-generation cephalosporin antibiotics with low water solubility and low intestinal permeability, which ultimately leads to significantly low bioavailability. Aim: This study aimed to increase solubility, improve drug release, and intestinal permeability of CFX by loading into SEDDS. Methods: Suitable excipients were selected based on drug solubility, percent transmittance, and emulsification efficiency. Pseudo-ternary phase diagram was fabricated for the identification of effective self-emulsification region. The best probably optimized formulations were further assessed for encumbered drug contents, emulsification time, cloud point measurement, robustness to dilution, mean droplet size, zeta potential, polydispersity index (PDI), and thermodynamic and chemical stability. Moreover, in vitro drug release studies and ex vivo permeation studies were carried out and apparent drug permeability P_app of different formulations was compared with the marketed brands of CFX. Results: Amongst the four tested SEDDS formulations, F-2 formulation exhibited the highest drug loading of 96.32%, emulsification time of 40.37 ± 3 s, mean droplet size of 19.01 ± 1.12 nm, and demonstrated improved long-term thermodynamic and chemical stability when stored at 4 °C. Release studies revealed a drug release of 97.32 ± 4.82% within 60 min in simulated gastric fluid. Similarly, 97.12 ± 5.02% release of CFX was observed in simulated intestinal fluid within 120 min; however, 85.13 ± 3.23% release of CFX was observed from the marketed product. Ex vivo permeation studies displayed a 2.7-fold increase apparent permeability compared to the marketed product in 5 h. Conclusion: Owing to the significantly improved drug solubility, in vitro release and better antibacterial activity, it can be assumed that CFX-loaded SEDDS might lead to an increased bioavailability and antibacterial activity, possibly leading to improved therapeutic effectiveness. Full article

Sillenite catalysts have shown efficient photocatalytic activity for the removal of various pollutants from water in previous studies, thus enhancing their activity by combining them with other materials will be very promising for environmental applications. In this context, an interesting hybrid system containing Polyaniline (PANI) as an adsorbent and Bi₁₂TiO₂₀ (BTO) sillenite as a catalyst was proposed in this work. Cefixime (CFX) has been selected as a pollutant for this study, and its removal was evaluated using PANI (adsorption), PANI and BTO (combined system) and the hybrid system Bi₁₂TiO₂₀/Polyaniline (BTO/PANI). First, the impact of PANI adsorption was investigated on its own; after that, the solution was filtered to separate the adsorbent from the liquid in order to re-treat the solution using photocatalysis (combining adsorption with photocatalysis). At the same time, a similar technique was used involving the hybrid system BTO/PANI. The results show that the hybrid system can remove a very high Cefixime concentration of 30 mg/L, almost 100%, within only 2 h, and this is better than previous investigations. These results indicate that it is possible to combine photocatalysis and adsorption processes to control water pollution. Full article

This work aims to synthesize and characterize a material that can be used as an effective catalyst for photocatalytic application to remove both organic and inorganic compounds from wastewater. In this context, sillenite Bi₁₂ZnO₂₀ (BZO) in a pure phase was synthesized using the sol–gel method. Before calcination, differential scanning calorimetry (DSC) analysis was done to determine the temperature of the formation of the sillenite phase, which was found to be 800 °C. After calcination, the phase was identified by X-ray diffraction (XRD) and then refined using the Rietveld refinement technique. The results prove that BZO crystals have a cubic symmetry with the space group I23 (N°197); the lattice parameters of the structure were also determined. From the crystalline size, the surface area was estimated using the Brunauer-Emmett-Teller (BET) method, which was found to be 11.22 m²/g. The formation of sillenite was also checked using the Raman technique. The morphology of the crystals was visualized using electron scanning microscope (SEM) analysis. After that, the optical properties of BZO were investigated by diffuse reflectance spectroscopy (DRS) and photoluminescence (PL); an optical gap of 2.9 eV was found. In the final step, the photocatalytic activity of the BZO crystals was evaluated for the removal of inorganic and organic pollutants, namely hexavalent chromium Cr(VI) and Cefixime (CFX). An efficient removal rate was achieved for both contaminants within only 3 h, with a 94.34% degradation rate for CFX and a 77.19% reduction rate for Cr(VI). Additionally, a kinetic study was carried out using a first-order model, and the results showed that the kinetic properties are compatible with this model. According to these findings, we can conclude that the sillenite BZO can be used as an efficient photocatalyst for wastewater treatment by eliminating both organic and inorganic compounds. Full article

This work aims to synthesize a photocatalyst with high photocatalytic performances and explore the possibility of using it for antibiotic removal from wastewater. For that, the spinel ZnBi₂O₄ (ZBO) was produced with the co-precipitation method and its optical, dielectric, and electrochemical characteristics were studied. The phase has been determined and characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). For the ZBO morphology, a Scanning Electron Microscopy (SEM) has been used. Then, the optical and dielectric properties of ZBO have been evaluated by calculating refractive index n (λ), extinction coefficient (k), dissipation factor (tan δ), relaxation time (τ), and optical conductivity (σopt) using the spectral distribution of T(λ) and R(λ). An optical gap band of 2.8 eV was determined and confirmed. The electrochemical performance of ZBO was investigated and an n-type semiconductor with a flat band potential of 0.54 V_SCE was found. The photocatalytic efficiency of ZBO was investigated in order to degrade the antibiotic Cefixime (CFX) under different light source irradiations to exploit the optical properties. A high CFX degradation of approximately 89% was obtained under solar light (98 mW cm⁻²) only after 30 min, while 88% of CFX degradation efficiency has been reached after 2 h under UV irradiation (20 mW cm⁻²); this is in line with the finding of the optical characterizations. According to the obtained data, solar light assisted nanoparticle ZBO can be used successfully in wastewater to remove pharmaceutical products. Full article