Search Results (98)

Carnitine (CA) is a chiral amino acid and mostly comes from meat and dairy products. CA cannot be found in fruits, vegetables, or other plants, so vegetarians are deficient in CA. CA exists in the form of D-carnitine (D-CA) and L-carnitine (L-CA); only L-carnitine has biological activity. L-CA promotes the oxidation of fatty acids and then causes the effect of weight loss. In this study, the fluorescence probe was established by using graphene oxide-modified cadmium telluride (CdTe) QDs (GO-CdTe QDs) for the chiral recognition of carnitine enantiomers. GO-CdTe QDs present fluorescence. D-CA enhances the fluorescence spectral signal of the GO-CdTe QDs system, while L-CA weakens its spectral signal. Based on this phenomenon, we determined D-carnitine and L-carnitine. Full article

Ternary metal chalcogenide quantum dots (QDs), such as CuInS₂, have attracted significant attention due to their lower toxicity compared to binary counterparts containing cadmium or lead, making them promising candidates for biomedical imaging and solar energy applications. The surfactant choice is critical for controlling nanocrystal nucleation, growth kinetics, and functionalization. This directly affects the toxicity and applications of QDs. In this work, we report a synthesis protocol for PVP-capped CuInS₂ QDs in an aqueous solution. Using density functional theory (DFT) calculations, we predicted the coordination patterns of PVP on the CuInS₂ QDs surface, providing insights into the stabilization mechanism. The synthesized QDs were characterized using TEM, XRD, XPS, and FTIR to assess their morphology, chemical composition, and surface chemistry. The QDs exhibited dual photoluminescence (PL) maxima at 550 nm and 680 nm, attributed to defect-related emissions, making them suitable for cell imaging applications. Cytotoxicity studies and cell imaging experiments demonstrate the excellent biocompatibility and effective staining capabilities of the PVP-capped CuInS₂ QDs, highlighting their potential as fluorescent probes for long-term, multicolor cell imaging including two-photon microscopy. Full article

In this work, we developed a highly sensitive and reproducible electrochemiluminescent sensor based on a heterostructure of cadmium selenide quantum dots capped with 3-mercaptopropionic acid (MPA) + 3-morpholinoethanesulfonic acid (MES) (QDs CdSe) and carbon nitride nanosheets (g-C₃N₄) for the detection of H₂O₂ in lyophilized serum samples. To enhance the sensor sensitivity, g-C₃N₄ nanosheets were utilized as a platform to immobilize the QDs CdSe. An exhaustive characterization of the heterostructure was conducted, elucidating the interaction mechanism between QDs CdSe and g-C₃N₄. It was revealed that g-C₃N₄ acts as a hole (h⁺) donor, while QDs CdSe act as energy acceptors in a resonance energy transfer process, with the electrochemiluminescence emission originating from the QDs CdSe. The electrochemiluminescence intensity decreases in the presence of H₂O₂ due to the deactivation of the excited states of the QDs CdSe. This electrochemiluminescent sensor demonstrates exceptional performance for detecting H₂O₂ in aqueous systems, achieving a remarkably low limit of detection (LOD) of 1.81 nM, which is more sensitive than most reported sensors to detect H₂O₂. The applicability of the sensor was successfully tested where sub-µM levels of H₂O₂ were accurately quantified. These results highlight the potential of this electrochemiluminescent sensor as a reliable and pre-treatment-free tool for H₂O₂ detection in biochemical studies and human health applications. Full article

Heavy metal cadmium causes significant contamination in aquatic ecosystems. The biomineralization of cadmium represents a vital biological mechanism for handling cadmium stress in diverse microorganisms. To improve the biomineralization capacity of cadmium by microorganisms in aquatic environments, Tetrahymena cysteine synthetase 1 (TtCsa1) was overexpressed in E. coli. The tolerance of E. coli/pET-28a-TtCSA1 to cadmium was enhanced by expressing TtCsa1. Upon addition of cysteine, E. coli/pET-28a-TtCSA1 generated more H₂S, which reacted with Cd²⁺ to form CdS quantum dots (QDs), resulting in a stronger fluorescence signal. The UV-visible absorption and fluorescence spectra of the culture supernatant of E. coli/pET-28a-TtCSA1 showed characteristic peaks corresponding to CdS QDs. Transmission Electron Microscopy (TEM) images confirmed that the formation of CdS QDs and their agglomeration in the E. coli cells. X-ray Diffraction Analysis (XRD) analysis further confirmed the presence of QDs and their crystalline nature. In rich medium, E. coli/pET-28a-TtCSA1 achieved removal rates of 99.5%, 98.2%, 56.5%, and 49.4%, respectively, for Cd²⁺ concentrations of 0.15, 0.3, 0.45, and 0.6 mM within 48 h. In simulated wastewater, E. coli/pET-28a-TtCSA1 achieved removal rates of 99.4%, 94.3%, 90.1%, and 89.8%, respectively, for Cd²⁺ concentrations of 0.3, 0.45, 0.6, and 0.75 mM within 12 h. These results demonstrate that overexpressing TtCsa1 in E. coli can significantly enhance its ability to biomineralize Cd²⁺ in rich medium and simulated wastewater, which has potential applications in bioremediation of aquatic environments contaminated with heavy metals. Full article

Recently, the numerical simulation of solar cells has attracted tantamount scientific attention in the photovoltaic community because it saves on research time and resources before the actual fabrication of the devices in the laboratories. Despite significant advancements in the fabrication of quantum dot-sensitized solar cells (QDSSCs), the power conversion efficiency (PCE) is still low when compared to other solar cells such as perovskite. This efficiency gap poses a substantial challenge in harnessing the full potential of QDSSCs for widespread adoption in renewable energy applications. Enhancing the efficiency of QDSSCs is imperative for their commercial viability and widespread deployment. In this work, SCAPS-1D was used in the simulation of QDSSCs. The solar cell with a general configuration of FTO/TiO₂/PbS/HTL/Au was investigated. In the device, PbS quantum dots were inserted as the absorber layer, TiO₂ as the electron transport layer (ETL), gold as the back contact, and the following inorganic materials, i.e., copper (I) iodide (CuI), copper (I) oxide (Cu₂O), cadmium zinc telluride selenide (CZTSe), copper iron tin sulfide (CFTS), and copper zinc tin sulfide selenide (CZTSSe) were tested as HTL materials, and FTO acted as the conductive substrate. The best HTL material (CZTSSe) exhibited a PCE of 22.61%, with a fill factor (FF) of 84.67%, an open circuit voltage (V_oc) of 0.753 V, and a current density (J_sc) of 35.48 mA cm⁻². This study contributes to the field by employing SCAPS-1D simulations to optimize QDSSCs, exploring novel inorganic HTL materials for these solar cells and identifying CZTSSe as a promising low-cost HTL that significantly enhances both the performance and commercial viability of QDSSCs. Full article

A mesoporous anatase/silica core–shell nanostructure (ASCS) was synthesized via a sol–gel method at 90 °C, and then cadmium sulfide quantum dots (CdS-QDs) were encapsulated in it, forming CdS-ASCS. The CdS-ASCS was synthesized to enhance the efficiency of heterogeneous nanophotocatalysts. The CdS-ASCS nanoparticles exhibited a core–shell morphology with a particle size of approximately 1.8 nm and a shell thickness of about 8 nm. The uniform distribution of cadmium, sulfur, titanium, and silicon was observed, along with a pore radius of roughly 2.5 nm and a bandgap energy of approximately 3.2 eV. Under ultraviolet irradiation, the CdS-ASCS demonstrated a photocatalytic degradation of 91% for methylene blue (MB) within 240 min, with a rate constant of 0.01 min⁻¹. These findings suggested that CdS-ASCS is a highly effective photocatalyst with promising applications in water purification. Full article

A fluorescence-based detection platform was developed for brain-derived neurotrophic factor (BDNF), a key biomarker of Alzheimer’s disease (AD). This platform utilizes localized surface plasmon resonance effects resulting from the interactions between silica-coated gold nanoparticles (Au@SiO₂) and enzymatically synthesized quantum dots (QDs). The gold nanoparticles were silica coated via the hydrolysis of tetraethyl orthosilicate, which allowed for precise control over the distance between the nanoparticles and QDs and refined the dynamics of fluorescence quenching and enhancement. Antibody conjugation was performed via sequential amination and carboxylation, followed by EDC/NHS coupling. BDNF was detected across a range of concentrations, from 1 ng/mL to 1 ng/mL, using an alkaline phosphatase (ALP)-conjugated polyclonal antibody targeting a secondary epitope of BDNF. The enzymatic hydrolysis of p-nitrophenyl phosphate by immobilized ALP led to the formation of cadmium sulfide QDs, with the fluorescence intensity correlating directly with the BDNF concentration. This platform offers a refined and precise method for detecting BDNF and is a reliable tool for the early diagnosis of AD. Full article

Infrared (IR) sensors are widely used in various applications due to their ability to detect infrared radiation. Currently, infrared detector technology is in its third generation and faces enormous challenges. IR radiation propagation is categorized into distinct transmission windows with the most intriguing aspects of thermal imaging being mid-wave infrared (MWIR) and long-wave infrared (LWIR). Infrared detectors for thermal imaging have many uses in industrial applications, security, search and rescue, surveillance, medical, research, meteorology, climatology, and astronomy. Presently, high-performance infrared imaging technology mostly relies on epitaxially grown structures of the small-bandgap bulk alloy mercury–cadmium–telluride (MCT), indium antimonide (InSb), and GaAs-based quantum well infrared photodetectors (QWIPs), contingent upon the application and wavelength range. Nanostructures and nanomaterials exhibiting appropriate electrical and mechanical properties including two-dimensional materials, graphene, quantum dots (QDs), quantum dot in well (DWELL), and colloidal quantum dot (CQD) will significantly enhance the electronic characteristics of infrared photodetectors, transition metal dichalcogenides, and metal oxides, which are garnering heightened interest. The present manuscript gives an overview of IR sensors, their types, materials commonly used in them, and examples of related applications. Finally, a summary of the manuscript and an outlook on prospects are given. Full article

Abstract: Quantum dot–polymer composites have the advantages of high luminescent quantum yield (PLQY), narrow emission half-peak full width (FWHM), and tunable emission spectra, and have broad application prospects in display and lighting fields. Research on quantum dots embedded in polymer films and plates has made great progress in both synthesis technology and optical properties. However, due to the shortcomings of quantum dots, such as cadmium selenide (CdSe), indium phosphide (InP), lead halide perovskite (LHP), poor water, oxygen, and light stability, and incapacity for large-scale synthesis, their practical application is still restricted. Various polymers, such as methyl methacrylate (PMMA), polyethylene terephthalate (PET), polystyrene (PS), polyvinylidene fluoride (PVDF), polypropylene (PP), etc., are widely used in packaging quantum dot materials because of their high plasticity, simple curing, high chemical stability, and good compatibility with quantum dot materials. This paper focuses on the application and development of quantum dot–polymer materials in the field of backlight displays, summarizes and expounds the synthesis strategies, advantages, and disadvantages of different quantum dot–polymer materials, provides inspiration for the optimization of quantum dot–polymer materials, and promotes their application in the field of wide-color-gamut backlight display. Full article

This study introduces a novel approach for transforming the cationic surfactant, cetyltrimethylammonium bromide (CTAB), into fluorescent carbon dots (CDs) capable of detecting cadmium ions at ultralow concentrations. The current approach involves preparing CDs through hydrothermal process at various pH levels. The CDs synthesized using pH 10, CTAB-CDs-10, exhibited the highest fluorescence quantum yield (QY), 14.22%. UV-Vis spectroscopy helped identify specific peaks between 210 and 300 nm, corresponding to the π–π* transitions of the aromatic C=C bonds. Transmission electron microscopic (TEM) analysis verified the uniform spherical morphology with a particle size < 2.45 nm. FT-IR analysis confirmed the presence of C=C stretching vibrations. The Box–Behnken (BB) Design was used to reconnoiter the influence of three variables on the response parameter: the F₀/F ratio. The best performance could be achieved at a pH of 9, after only 300 s, and a temperature of 50 °C. The developed CTAB-CDs-based nanoprobe showed an ON–OFF behavior when came in contact with cadmium (II) and demonstrated high sensitivity with a limit of detection as low as 0.06 µM (0.007 ppm) over a wide linear range of 2–103 µM. Validation tests confirmed the applicability of the CTAB-CDs-based nanoprobe for detecting cadmium (II) in tap and drinking waters with high accuracy and precision. Full article

Quantum dot light-emitting diodes (QLEDs) have potential application prospects in new-type display fields due to their wide color gamut, high energy efficiency, as well as low-cost mass production. Research on lead-free and cadmium-free blue quantum dots (QDs) is urgently needed for the development of QLED technology. For I-III-VI QDs, multiple luminescent centers generated by imbalanced local charge distribution have a detrimental effect on the emission performance. Regulating the chemical composition is one of the effective methods to control the defect type of blue-emitting QDs. In this work, narrow-bandwidth (with a full width at half maximum of 53 nm) blue CuAlSe₂ QDs are achieved by altering the Cu/Al ratio. As the Cu/Al ratio increases from 0.2 to 1, the photoluminescence (PL) emission peak is red-shifted from 450 to 460 nm, with PL quantum yield up to 56%. The PL spectra are deconvoluted into three emission peaks by Gaussian fitting analysis, demonstrating the main luminescent contribution coming from the radiative recombination of electrons residing in the aluminum–copper antisite (Al_Cu) defect level with the holes in the valence band. This work provides a new approach for preparing eco-friendly and high-efficient blue-emitting QDs. Full article

Fluorescent materials for sensing have gained attention for the visual detection of different substances as metals and pesticides for environmental monitoring. This work presents fluorescent nanocomposites in solution, film, and paper obtained without capping and stabilizing agents, coming from quantum dots of cadmium sulfide (CdS QDs) and anionic–cationic polymer matrices. Fluorescent films were formed by casting and fluorescent paper by impregnation from the solutions. The optical properties of CdS QDs in solution showed absorption between 418 and 430 nm and a maximum emission at 460 nm. TEM analysis evidenced particle size between 3 and 6 nm and diffraction patterns characteristic of CdS nanocrystals. Infrared spectra evidenced changes in the wavenumber in the fluorescent films. The band gap values (2.95–2.82 eV) suggested an application for visible transmitting film. Fluorescent solutions by UV-vis and fluorescence evidenced a chemical interaction with glyphosate standard between 1 and 100 µg/mL concentrations. The analysis of red, green, and blue color codes (RGB) evidenced a color response of the fluorescent paper at 10 and 100 µg/mL, but the fluorescent films did not show change. Nanocomposites of chitosan and pectin, in solution and on paper, exhibited a behavior “turn-on” sensor, while carboxymethylcellulose had a “turn-off” sensor. This methodology presents three fluorescent materials with potential applications in visual sensing. Full article

The utilization of InP-based quantum dots (QDs) as alternative luminescent nanoparticles to cadmium-based QDs is actively pursued. However, leveraging their luminescence for solid-state applications presents challenges due to the sensitivity of InP QDs to oxidation and aggregation-caused quenching. Hence, an appealing strategy is to protect and disperse InP QDs within hybrid materials. Metal–organic frameworks (MOFs) offer a promising solution as readily available crystalline porous materials. Among these, MOF-5 (composed of {Zn₄O}⁶⁺ nodes and terephthalate struts) can be synthesized under mild conditions (at room temperature and basic pH), making it compatible with InP QDs. In the present work, luminescent InP/ZnS QDs are successfully incorporated within MOF-5 by two distinct methods. In the bottle around the ship (BAS) approach, the MOF was synthesized around the QDs. Alternatively, in the ship in the bottle (SIB) strategy, the QDs were embedded via capillarity into a specially engineered, more porous variant of MOF-5. Comparative analysis of the BAS and SIB approaches, evaluating factors such as operational simplicity, photoluminescence properties, and the resistance of the final materials to leaching were carried out. This comparative study provides insights into the efficacy of these strategies for the integration of InP/ZnS QDs within MOF-5 for potential solid-state applications in materials chemistry. Full article

Fluorescent nanoparticles known as quantum dots (QDs) have unique properties that make them useful in biomedicine. Specifically, CdSe/ZnS QDs, while good at fluorescing, show toxicity. Due to this, safer alternatives have been developed. This study uses a tetrazolium dye (XTT) viability assay, reactive oxygen species (ROS) fluorescent imaging, and apoptosis to investigate the effect of QD alternatives InP/ZnS, CuInS₂/ZnS, and nitrogen-doped carbon dots (NCDs) in liver cells. The liver is a possible destination for the accumulation of QDs, making it an appropriate model for testing. A cancerous liver cell line known as HepG2 and an immortalized liver cell line known as THLE-2 were used. At a nanomolar range of 10–150, HepG2 cells demonstrated no reduced cell viability after 24 h. The XTT viability assay demonstrated that CdSe/ZnS and CuInS₂/ZnS show reduced cell viability in THLE-2 cells with concentrations between 50 and 150 nM. Furthermore, CdSe/ZnS- and CuInS₂/ZnS-treated THLE-2 cells generated ROS as early as 6 h after treatment and elevated apoptosis after 24 h. To further corroborate our results, apoptosis assays revealed an increased percentage of cells in the early stages of apoptosis for CdSe/ZnS-treated (52%) and CuInS₂/ZnS-treated (38%) THLE-2. RNA transcriptomics revealed heavy downregulation of cell adhesion pathways such as wnt, cadherin, and integrin in all QDs except NCDs. In conclusion, NCDs show the least toxicity toward these two liver cell lines. While demonstrating less toxicity than CdSe/ZnS, the metallic QDs (InP/ZnS and CuInS₂/ZnS) still demonstrate potential concerns in liver cells. This study serves to explore the toxicity of QD alternatives and better understand their cellular interactions. Full article

The combination of ion exchange membranes with carbon quantum dots (CQDs) is a promising field that could lead to significant advances in water treatment. Composite membranes formed by sulfonated poly(ether ether ketone) (SPEEK) with embedded CQDs were used for the detection and removal of heavy metal ions, such as lead and cadmium, from water. SPEEK is responsible for the capture of heavy metals based on the cation exchange mechanism, while CQDs detect their contamination by exhibiting changes in fluorescence. Water-insoluble “red” carbon quantum dots (rCQDs) were synthesized from p-phenylenediamine so that their photoluminescence was shifted from that of the polymer matrix. CQDs and the composites were characterized by several techniques: FTIR, Raman, UV/VIS, photoluminescence, XPS spectroscopies, and AFM microscopy. The heavy metal ion concentration was analyzed by inductively coupled plasma–optical emission spectroscopy (ICP-OES). The concentration ranges were 10.8–0.1 mM for Pb²⁺ and 10.0–0.27 mM for Cd²⁺. SPEEK/rCQDs showed a more pronounced turn-off effect for lead. The composite achieved 100% removal efficiency for lead and cadmium when the concentration was below a half of the ion exchange capacity of SPEEK. The regeneration of membranes in 1 M NaCl was also studied. A second order law was effective to describe the kinetics of the process. Full article