Search Results (8)

During large-scale pavement construction, the preparation of SBS-modified asphalt typically produces large amounts of harmful fumes. The emergence of deodorants can effectively alleviate the problem of smoke emissions during the asphalt manufacturing process. On the basis of ensuring the original road performance, exploring more suitable dosages and types of deodorant is urgently needed. Five commercial deodorants were evaluated using an asphalt smoke collection system, and UV-visible spectrophotometry (UV) was employed to screen the deodorants based on smoke concentration. Gas chromatography–mass spectrometry (GC-MS) was used to quantitatively analyze changes in harmful smoke components before and after adding two deodorants. Subsequently, the mechanisms of action of the two different types of deodorants were analyzed microscopically using fluorescence microscopy. Finally, the performance of bitumen and asphalt mixtures after adding deodorants was evaluated. The results showed that deodorant A (reactive type) and D (adsorption type) exhibited the best smoke suppression effects, with optimal addition rates of 0.6% and 0.5%, respectively. Deodorant A reduced benzene homologues by nearly 50% and esters by approximately 40%, while deodorant D reduced benzene homologues by approximately 70% and esters by approximately 60%, without producing new toxic gases. Both deodorants had a minimal impact on the basic properties of bitumen and the road performance of asphalt mixtures, with all indicators meeting technical specifications. This research provides a theoretical basis for the effective application of deodorants in the future, truly enabling a transition from laboratory research to large-scale engineering applications in the construction of environmentally friendly roads. Full article

Asphalt releases a large number of irritating fumes during construction and use, which is a serious emission pollution that not only damages the atmospheric environment but also produces highly toxic and carcinogenic volatile organic compounds (VOCs), posing a health risk to human beings. In this study, a compound-doped modified bitumen for reducing VOC emission was prepared by using zeolite as the main adsorbent material, modified by hydrochloric acid, and LDHs as a synergistic adsorbent material. By determining its basic and rheological properties, the results show that the compounding of LDHs and HCL-modified zeolite added to asphalt can improve the high-temperature performance of asphalt binder, but at the same time, the anti-fatigue property will be decreased. By GC-MS experimental analysis, a total of 72.2% fewer volatile organic compounds (VOCs) were released by the compound modified asphalt compound than by virgin asphalt, which resulted in a significant reduction in asphalt fume emissions. It shows that the asphalt VOC molecules are well adsorbed by the porous adsorption of LDHs and zeolite materials, and it is also found experimentally that they inhibit the emission of VOCs through the blocking and adsorption effects. This study provides a scientific basis for inhibiting the emission of VOCs during asphalt pavement construction. Full article

This study explores the potential in substituting ordinary Portland cement (OPC) with industrial waste silica fume (SF) as a mineral filler in asphalt mixtures (AM) for flexible road pavements. The Marshall and indirect tensile strength tests were used to evaluate the mechanical resistance and durability of the AMs for different SF and OPC ratios. To develop predictive models of the key mechanical and volumetric parameters, the experimental data were analyzed using artificial neural networks (ANN) with three different activation functions and leave-one-out cross-validation as a resampling method. The addition of SF resulted in a performance comparable to, or slightly better than, OPC-based mixtures, with a maximum indirect tensile strength of 1044.45 kPa at 5% bitumen content. The ANN modeling was highly successful, partly due to an interpolation-based data augmentation strategy, with a correlation coefficient R_CV of 0.9988. Full article

The carbon footprint reduction mandate and other eco-friendly policies currently in place are constantly driving the trend of the synthesis and application of sustainable functional materials. The bitumen industry is not an exception to this trend and, every day, new technologies that facilitate safer, cost effective and more sustainable industrial processes and road paving operations are being researched and brought to light. A lot of research is currently ongoing to improve bitumen’s properties due to its use as a binder in road paving processes. Over the years, the most common method to improve bitumen’s properties has been with the use of additives. The major drawback in the use of these additives is the fact that they are substances of strong chemical nature which are either too acidic, too basic or emit toxic fumes and volatile organic compounds into the environment. In the long run, these chemicals are also toxic to the road pavement personnel that carry out the day to day industrial and paving operations. This led researchers to the initiative of synthesizing and applying biomaterials to be used as additives for bitumen. In this light, several studies have investigated the use of substances such as bio-oils, natural waxes, gum, polysaccharides and natural rubber. This literature review is aimed at classifying the different bio-based materials used to improve bitumen’s properties and to provide a deeper knowledge of the application of these biomaterials in bitumen technology. In general, we highlight how the research efforts elaborated herein could potentially foster safer, sustainable, eco-friendly approaches to improving bitumen’s properties while also promoting a circular economy. Full article

Bitumen is a major construction material that can emit harmful fumes when heated. These fumes pose health risks to workers and communities near construction projects or asphalt mixing plants. The chemical complexity of bitumen fumes and the increasing use of additives add to the difficulty of analytically quantifying the harmful chemicals emitted using a single technique. Research on bitumen emissions consists of numerous sample preparation and analytical methods. There are a range of considerations to be made when deciding on an appropriate sample preparation method and instrumental configuration to optimise the analysis of specific organic contaminants in emissions. Researchers investigating emissions from bituminous materials may need to consider a range of analytical techniques to quantify harmful chemicals and assess the efficacy of new additives. This review summarises the primary methodologies for sample preparation and analytical techniques used in bitumen research and discusses future challenges and solutions. Full article

In this study, bitumen modified by fumed silica nanoparticles was characterized through dynamic shear rheometer tests, scanning electron microscopy, and Fourier transform infrared spectroscopy. The fumed silica nanoparticles were used in three different ratios, i.e., 0.1, 0.2 and 0.3 wt.-% of bitumen. Specifically, the modified bitumen characteristics were studied after laboratory aging by analyzing the chemical composition and rheological properties. From the determination of oxidation degree and carbonyl index it was found that the resistance of the modified bitumen to ultraviolet aging was improved with the increasing nanoparticle content. In bitumen modified by fumed silica nanoparticles, the nanoparticles were well dispersed. Moreover, the results illustrated that the bitumen properties were improved, and the improvement effect of 0.1 wt.-% fumed silica nanoparticles was more distinct than the higher concentrations. Full article

Bitumen is one of the most important materials used in roads. During asphalt pavement construction, workers can be affected by emissions, such as volatile organic compounds (VOCs), when bitumen is heated. Therefore, it is crucial to correctly identify and measure VOCs. This paper presents a novel, promising method to determine VOC emissions. The proposed method offers a way to standardize routine measurements on a lab scale, enabling reliable comparison across bitumen types and their modifications or additives. A proton-transfer reaction time-of-flight mass spectrometer (PTR-TOF-MS) was used to monitor VOC emissions from commercial unmodified bitumen and crumb rubber modified bitumen (CRMB) with heating of up to 180 °C. Results confirmed that the temperature range of 160–180 °C is a highly influential factor for VOC emissions from heated commercial bitumen and particularly CRMB. A significant increase in alkane and aromatic emission was detected when the binders were heated to 180 °C. Sulfur-containing VOCs were almost nonexistent for the base bitumen fumes, while a significant increase was detected in the fumes when two different types of CR were added to the bitumen, even at 120 °C. The additional CR in the bituminous binder contributed to the potentially harmful VOC emission of benzothiazole, which belongs to the class of sulfur-containing compounds. The concentration of benzothiazole was 65%, 38%, and 35% higher for CR1 in comparison to CR2 at 140, 160, and 180 °C, respectively. It is clear from the results that this method allows different bitumen sources or modifications to be quickly analyzed and their VOC emissions cross-compared. If adopted and confirmed further, the method could offer the asphalt industry a viable solution to monitor VOC emissions by analyzing samples in real time at different steps of the production process. Full article

Waste management has become an issue of increasing concern worldwide. These products are filling landfills and reducing the amount of livable space. Leachate produced from landfills contaminates the surrounding environment. The conventional incineration process releases toxic airborne fumes into the atmosphere. Researchers are working continuously to explore sustainable ways to manage and recycle waste materials. Recycling and reuse are the most efficient methods in waste management. The pavement industry is one promising sector, as different sorts of waste are being recycled into asphalt concrete and bitumen. This paper provides an overview of some promising waste products like high-density polyethylene, marble quarry waste, building demolition waste, ground tire rubber, cooking oil, palm oil fuel ash, coconut, sisal, cellulose and polyester fiber, starch, plastic bottles, waste glass, waste brick, waste ceramic, waste fly ash, and cigarette butts, and their use in asphalt concrete and bitumen. Many experts have investigated these waste materials and tried to find ways to use this waste for asphalt concrete and bitumen. In this paper, the outcomes from some significant research have been analyzed, and the scope for further investigation is discussed. Full article