Search Results (91)

Concerns about sustainable energy sources arise due to the non-renewable nature of petroleum. Escalating demand for fossil fuels and price inflation negatively impact the energy security and economy of a country. The generation and usage of biofuel could be suggested as a sustainable alternative to fossil fuels. Several studies have investigated the potential of using edible crops for biofuel production. However, the usage of algae as suitable feedstock is currently being promoted due to its ability to withstand adverse environmental conditions, capacity to generate more oil per area, and potential to mitigate energy crises and climate change with no detrimental impact on the environment and food supply. Furthermore, the biorefinery approach in algae-based biofuel production controls the economy of algal cultivation. Hence, this article critically reviews different cultivation systems of algae with critical parameters including harvesting methods, intended algae-based biofuels with relevant processing techniques, other applications of valorized algal biomass, merits and demerits, and limitations and challenges in algae-based biofuel production. Full article

Lignocellulosic biomass is currently widely used in many biorefining processes. The full exploitation of biomass from uncultivated or even marginal lands for the production of biobased chemicals has deserved huge attention in the last few years. Among the sustainable biomass-based value chains, cardoon crops could be a feedstock for biorefineries as they can grow on marginal lands and be used as raw material for multipurpose exploitation, including seeds, roots, and epigeous lignocellulosic solid residue. This work focused on the technical analysis of a novel integrated flowsheet for the exploitation of the lignocellulosic fraction through the assessment of thermochemical, biochemical, and extractive technologies and processes. In particular, high-yield thermochemical processes (gasification), innovative biotechnological processes (syngas fermentation to ethanol), and extractive/catalyzed processes for the valorization of cardoon roots to FDCA and residual solid biomass were modeled and simulated. Inulin conversion to 2,5-Furandicarboxylic acid was the main conversion route taken into consideration. Finally, the novel process flowsheet, treating 130,000 t/y of residual biomass and integrating all proposed technologies, was modeled and assessed using process simulation tools to achieve overall mass and energy balances for comparison with alternative options. The results indicated that cardoon biorefining through the proposed flowsheet can produce, per 1000 tons of input dry biomass, 211 kg of 2,5-Furandicarboxylic acid and 140 kg of ethanol through biomass gasification followed by syngas fermentation. Furthermore, a pre-feasibility analysis was conducted, revealing significant and potentially disruptive results in terms of environmental impact (with 40 kt_CO2eq saved) and economic feasibility (with an annual gross profit of EUR 30 M/y). Full article

An Integrated Process Intensification (IPI) technology-based roadmap is proposed for the utilization of renewables (water, air and biomass/unavoidable waste) in the small-scale distributed production of the following primary products: electricity, H₂, NH₃, HNO₃ and symbiotic advanced (SX) fertilizers with CO₂ mineralization capacity to achieve negative CO₂ emission. Such a production platform is an integrated intensified biorefinery (IIBR), used as an alternative to large-scale centralized production which relies on green electricity and CCUS. Hence, the capacity and availability of the renewable biomass and unavoidable waste were examined. The critical elements of the IIBR include gasification/syngas production; syngas cleaning; electricity generation; and the conversion of clean syngas (which contains H₂, CO, CH₄, CO₂ and N₂) to the primary products using nonthermal plasma catalytic reactors with in situ NH₃ sequestration for SA fertilizers. The status of these critical elements is critically reviewed with regard to their techno-economics and suitability for industrial applications. Using novel gasifiers powered by a combination of CO₂, H₂O and O₂-enhanced air as the oxidant, it is possible to obtain syngas with high H₂ concentration suitable for NH₃ synthesis. Gasifier performances for syngas generation and cleaning, electricity production and emissions are evaluated and compared with gasifiers at 50 kWe and 1–2 MWe scales. The catalyst and plasma catalytic reactor systems for NH₃ production with or without in situ reactive sequestration are considered in detail. The performance of the catalysts in different plasma reactions is widely different. The high intensity power (HIP) processing of perovskite (barium titanate) and unary/binary spinel oxide catalysts (or their combination) performs best in several syntheses, including NH₃ production, NO_x from air and fertigation fertilizers from plasma-activated water. These catalysts can be represented as BaTi_1−vO_3−x{#}_yN_z (black, piezoelectric barium titanate, bp-{BTO}) and M⁽¹⁾_3−jM⁽²⁾_kO_4−m{#}_nN_r/SiO₂ (unary (k = 0) or a binary (k > 0) silane-coated SiO₂-supported spinel oxide catalyst, denoted as M/Si = X) where {#} infers oxygen vacancy. HIP processing in air causes oxygen vacancies, nitrogen substitution, the acquisition of piezoelectric state and porosity and chemical/morphological heterogeneity, all of which make the catalysts highly active. Their morphological evaluation indicates the generation of dust particles (leading to porogenesis), 2D-nano/micro plates and structured ribbons, leading to quantum effects under plasma catalytic synthesis, including the acquisition of high-energy particles from the plasma space to prevent product dissociation as a result of electron impact. M/Si = X (X > 1/2) and bp-{BTO} catalysts generate plasma under microwave irradiation (including pulsed microwave) and hence can be used in a packed bed mode in microwave plasma reactors with plasma on and within the pores of the catalyst. Such reactors are suitable for electric-powered small-scale industrial operations. When combined with the in situ reactive separation of NH₃ in the so-called Multi-Reaction Zone Reactor using NH₃ sequestration agents to create SA fertilizers, the techno-economics of the plasma catalytic synthesis of fertilizers become favorable due to the elimination of product separation costs and the quality of the SA fertilizers which act as an artificial root system. The SA fertilizers provide soil fertility, biodiversity, high yield, efficient water and nutrient use and carbon sequestration through mineralization. They can prevent environmental damage and help plants and crops to adapt to the emerging harsh environmental and climate conditions through the formation of artificial rhizosphere and rhizosheath. The functions of the SA fertilizers should be taken into account when comparing the techno-economics of SA fertilizers with current fertilizers. Full article

Natural resources are currently overexploited to provide food supply for the ever-increasing world population, and because of the intensification of agricultural and food production, there is a growing rate of waste generation. This waste biomass is usually dumped into landfills, causing unprecedented damage to ecosystems. Nowadays, circular economy strategies are channeled towards waste harnessing, aiming at reducing the irrational use of resources and minimizing waste generation. Potatoes are the second largest food crop after cereals, and there is an overwhelming amount of waste derived from potato tuber processing, composed almost exclusively of peels. Potato peels (PPs) are considered a source of polyphenolic compounds, largely represented by chlorogenic acid and other structurally related hydroxycinnamates, which possess a spectrum of bioactivities; however, there is a lack of analytical data compilations that could be of assistance in pertinent studies. With this as the conceptual basis, the scope of this review focused on a particular class of polyphenols, the so-called hydroxycinnamates, to deliver compiled data associated with the occurrence, retrieval, and application of this group of compounds derived from potato waste with major emphasis being given to PPs. It is believed that the collection of data of this nature, due to their undisputed significance in studies pertaining to bioeconomy, biorefinery, and food waste valorization, would provide a highly useful contribution to the field. Full article

Lactic acid (LA) is a versatile, optically active compound with applications across the food, cosmetics, pharmaceutical, and chemical industries, largely driven by its role in producing biodegradable polylactic acid (PLA). Due to its abundance, lignocellulosic biomass is a promising and sustainable resource for LA production, although media derived from these matrices are often rich in xylose and contain growth inhibitors. This study investigates LA production using a xylose-rich medium derived from Cynara cardunculus L. altilis DC stalks treated through steam explosion and enzymatic hydrolysis. The lactic acid bacteria strains Lacticaseibacillus casei, Paucilactobacillus vaccinostercus, and Pediococcus pentosaceus were grown on natural media, achieving yields of 0.59, 0.57, and 0.58 g LA/g total carbon consumed, respectively. Remarkably, on xylose-rich media, all supplied sugar was consumed, with LA yields comparable to those on complex media. These findings highlight the adaptability of these strains in the presence of inhibitors and support the potential of lignocellulosic biomass as a low-cost and sustainable substrate for effective PLA production. Full article

Background: In agricultural supply chains, unequal bargaining power often leads to economic inequality, particularly for farmers. The fair profit distribution (FPD) approach offers a solution by optimizing supply chain flows (materials, information, and money) to promote economic equity among members. However, our literature review highlights a gap in applying the FPD approach to the facility location-allocation problem in supply chain network design (SCND), particularly in sugarcane-derived biofuel supply chains. Methods: Consequently, we propose a multi-period optimization model based on FPD to design a sugarcane biofuel supply chain. The methodology involves four steps: constructing a conceptual model, developing a mathematical model, designing a solution strategy, and generating insights. This model considers both investment (crop development, biorefinery construction) and operational phases over a long-term planning horizon, focusing on farm location and crop allocation. Results: By comparing the FPD model to a traditional centralized planning supply chain (CSC) approach, we examine the impact of the planning horizon, number of farms, and sugarcane prices paid by biorefineries on financial performance. While the FPD model results in lower overall system profits, it fosters a fairer economic scenario for farmers. Conclusions: This study contributes to economic justice in supply chains and offers insights to promote fair trade among stakeholders. Full article

Extensive utilization of renewable biomass is crucial for the progress of carbon neutral and carbon peak implementation. Wheat straw, as an important by-product of crops, is hardly ever efficiently utilized by conventional processes. Here, we proposed a mild acid-coupled-with-enzymatic-treatment process to realize the utilization of lignin and hemicelluloses from pulping liquor on the basis of the chemical–mechanical pulping process. The pulping liquor was treated with acid first to precipitate lignin, and it was further hydrolyzed with xylanase to obtain XOSs. The recovered lignin was characterized by FT-IR, 2D-HSQC, GPC, etc. It was found that lignin undergoes depolymerization and condensation during acid treatment. Also, saccharide loss enhanced with the decrease in pH due to the presence of the LCC structure. As a result, an optimized pH of 4 for the acid treatment ensured that the removal rate of lignin and loss rate of polysaccharides achieved 77.15% and 6.13%, respectively. Moreover, further xylanase treatment of the pulping liquor attained a recovery rate of 51.87% for XOSs. The study presents a new insight for the efficient utilization of lignin and hemicellulose products from non-woody materials in the prevailing biorefinery concept. Full article

This study investigates the potential use of white lupine straw (WLS), an underutilized agricultural by-product, as a raw material to produce valuable biochemicals such as monosaccharides and 5-hydroxymethylfurfural (5-HMF) through hydrothermal pretreatment. The aim was to optimize mild reaction conditions to maximize the recovery of these products while minimizing degradation. The hydrothermal treatment of WLS in subcritical water with trace amounts of sulfuric acid was performed, followed by a two-step approach to evaluate the yields of hemicellulose and 5-HMF. The highest monosaccharide yield (163 g/kg) was achieved at temperatures between 174 and 181 °C and a holding time of 7–14 min, while the 5-HMF production was 139.9 g/kg at 199–203 °C and after 0.5–4.5 min. These results suggest that optimal 5-HMF production also increases the remaining solid residue. This study highlights the feasibility of WLS as a sustainable, low-cost biomass resource. It highlights the balance between temperature and time to maximize valuable product yields. The results contribute to advancing biorefinery processes by demonstrating that WLS can be effectively converted into bioethanol precursors and industrial chemicals, supporting circular bioeconomy principles and providing an environmentally friendly alternative to burning crop residues. Full article

The increasing global population has raised concerns about meeting growing food demand. Consequently, the agricultural sector relies heavily on chemical fertilizers to enhance crop production. However, the extensive use of chemical fertilizers can disrupt the natural balance of the soil, causing structural damage and changes in the soil microbiota, as well as affecting crop yield and quality. Biofertilizers and biostimulants derived from microalgae and cyanobacteria are promising sustainable alternatives that significantly influence plant growth and soil health owing to the production of diverse biomolecules, such as N-fixing enzymes, phytohormones, polysaccharides, and soluble amino acids. Despite these benefits, naturally producing high-quality microalgal biomass is challenging owing to various environmental factors. Controlled settings, such as artificial lighting and photobioreactors, allow continuous biomass production, but high capital and energy costs impede large-scale production of microalgal biomass. Sustainable methods, such as wastewater bioremediation and biorefinery strategies, are potential opportunities to overcome these challenges. This review comprehensively summarizes the plant growth-promoting activities of microalgae and elucidates the mechanisms by which various microalgal metabolites serve as biostimulants and their effects on plants, using distinct application methods. Furthermore, it addresses the challenges of biomass production in wastewater and explores biorefinery strategies for enhancing the sustainability of biofertilizers. Full article

In the current study, the cultivation of microalgae on wastewater-based substrates is investigated for an effective natural wastewater treatment that also generates biofuels and value-added products beneficial to human health. Additionally, the health of ecosystems can be evaluated via microalgae. The utilization of microalgae as bioindicators, biofuel producers, and wastewater treatment providers, under the biorefinery concept, is covered in this article. In fact, bioremediation is feasible, and microalgae culture can be used to efficiently process a variety of effluents. Along with wastewater processing and the creation of value-added substances, bioconversion concurrently offers a viable and promising alternative for reducing CO₂ greenhouse gas emissions to contribute to climate change mitigation. The microalgal biorefinery being considered as the third generation is unique in that it addresses all the aforementioned problems, in contrast to lignocellulosic biomass from agricultural waste in second-generation biorefineries and edible crops in first-generation biorefineries. In particular, one of the most promising natural resources for the manufacture of biofuel, including biodiesel, bioethanol, biomethane, and biohydrogen, is found to be microalgae. Furthermore, products of high value, like fatty acid methyl esters, astaxanthin, β-carotene, DHA, and EPA can be made. Hence, microalgal biomass offers a substitute for the development of biofertilizers, bioplastics, pharmaceuticals, cosmetics, animal and aquatic feeds, and human nutrition products, thus promoting human and environmental health. Full article

Flax (Linum usitatissimum L.) can be grown both as an oil crop and as a fiber crop, and this offers new opportunities when included in the framework of a whole-crop biorefinery, a system in which a range of products are made from portions of grain and straw and in which both of these should be satisfactorily produced. In the present experiment, the effect of flax genotypes (7 varieties), cultivation sites (two locations) and seasons (two years) were tested with a standard randomized complete block design, in search of a compromise for the production performance for both grain and straw, with the aim of reintroducing flax back into the northern Italian environment. Overall, grain yield reaches an average value of about 1.4 t ha⁻¹ (dw), while straw yield reaches 2.77 t ha⁻¹ (dw). The former is strictly dependent on the environmental effects of the growing site and season, while the effect of genotype was not significant. The straw yield also depends on the second-order interaction of the factors analyzed, although the performance of three varieties, Festival, Solal and Linoal, was noteworthy and seemed to respond well in both environments. Overall, it was found that flax can be conveniently grown for both grain and straw production. Full article

Bioconversion in biorefineries is a way to valorize residues from agriculture and food processing. Pretreatment is an important step in the bioconversion of lignocellulosic materials, including crop residues. This Special Issue includes nine articles on several pretreatment and bioconversion approaches applied to different agricultural residues and food-processing by-products. The materials addressed in this collection cover straw from wheat, rye, and miscanthus, olive tree pruning residue, almond shells and husks, avocado waste, sweet sorghum bagasse, soybean meal, and residues of non-edible oilseeds. Full article

The management of vegetable waste and byproducts is a global challenge in the agricultural industry. As a commonly consumed vegetable crop, cruciferous vegetables marked higher amounts of wastage during their supply chain processes, with a significant contribution from cabbage, cauliflower, and broccoli. Therefore, the sustainable and resource-efficient utilization of discarded materials is crucial. This review explores potential applications of cruciferous vegetable waste and byproducts, spotlighting cabbage, cauliflower, and broccoli in food, medicinal, and other industries. Their significance of being utilized in value-added applications is addressed, emphasizing important biomolecules, technologies involved in the valorization process, and future aspects of practical applications. Cabbage, cauliflower, and broccoli generate waste and low-processing byproducts, including leaves, stems, stalks, and rot. Most of them contain high-value biomolecules, including bioactive proteins and phytochemicals, glucosinolates, flavonoids, anthocyanins, carotenoids, and tocopherols. Interestingly, isothiocyanates, derived from glucosinolates, exhibit strong anti-inflammatory and anticancer activity through various interactions with cellular molecules and the modulation of key signaling pathways in cells. Therefore, these cruciferous-based residues can be valorized efficiently through various innovative extraction and biotransformation techniques, as well as employing different biorefinery approaches. This not only minimizes environmental impact but also contributes to the development of high-value-added products for food, medicinal, and other related industries. Full article

Biofuels are clean and renewable energy resources gaining increased attention as a potential replacement for non-renewable petroleum-based fuels. They are derived from biomass that could either be animal-based or belong to any of the three generations of plant biomass (agricultural crops, lignocellulosic materials, or algae). Over 130 studies including experimental research, case studies, literature reviews, and website publications related to bioethanol production were evaluated; different methods and techniques have been tested by scientists and researchers in this field, and the most optimal conditions have been adopted for the generation of biofuels from biomass. This has ultimately led to a subsequent scale-up of procedures and the establishment of pilot, demo, and large-scale plants/biorefineries in some regions of the world. Nevertheless, there are still challenges associated with the production of bioethanol from lignocellulosic biomass, such as recalcitrance of the cell wall, multiple pretreatment steps, prolonged hydrolysis time, degradation product formation, cost, etc., which have impeded the implementation of its large-scale production, which needs to be addressed. This review gives an overview of biomass and bioenergy, the structure and composition of lignocellulosic biomass, biofuel classification, bioethanol as an energy source, bioethanol production processes, different pretreatment and hydrolysis techniques, inhibitory product formation, fermentation strategies/process, the microorganisms used for fermentation, distillation, legislation in support of advanced biofuel, and industrial projects on advanced bioethanol. The ultimate objective is still to find the best conditions and technology possible to sustainably and inexpensively produce a high bioethanol yield. Full article

Agriculture plays a major role on society, especially in developing countries which rely on commodity exportation markets. To maintain high crop productivity, the use of agrochemicals was once employed as the main strategy, which in turn affected soil, water, and human health. In order to aid this issue, identifying some alternatives, such as the implementation of biofertilizers and inoculants as bioinputs in modern agriculture, are imperative to improve ecosystem quality. Among these bioinputs, a few bioproducts have shown good performances, such as phytohormones (e.g., auxins and giberellins), biosurfactants, and other enzymes; thus, it is extremely important to assure the quality and feasibility of their production in biorefinery scenarios. These bioproducts can be synthesized through fermentation processes through utilizing plant biomasses and agricultural byproducts as carbon sources. In this sense, to increase the tecno-economical availability of these processes, the implementation of solid-state fermentation (SSF) has shown great potential due to its ease of operation and cost-attractiveness. Therefore, this study aims to describe the main substrates used in SSF systems for the production of potential bioinputs; their associated operation hurdles, parameters, and conditions selection; the most suitable microorganisms; and the underlying mechanisms of these molecules in soil dynamics. Within this context, this study is expected to contribute to the development of new processes in modern biorefineries and to the mitigation of environmental impacts. Full article