Search Results (6)

A healthy lymphatic system is required to return excess interstitial fluid back to the venous circulation. However, up to 49% of breast cancer survivors eventually develop breast cancer-related lymphedema due to lymphatic injuries from lymph node dissections or biopsies performed to treat cancer. While early-stage lymphedema can be ameliorated by manual lymph drainage, no cure exists for late-stage lymphedema when lymph vessels become completely dysfunctional. A viable late-stage treatment is the autotransplantation of functional lymphatic vessels. Here we report on a novel engineered lymphatic flap that may eventually replace the skin flaps used in vascularized lymph vessel transfers. The engineered flap mimics the lymphatic and dermal compartments of the skin by guiding multi-layered tissue organization of mesenchymal stem cells and lymphatic endothelial cells with an aligned decellularized fibroblast matrix. The construct was tested in a novel bilayered wound healing model and implanted into athymic nude rats. The in vitro model demonstrated capillary invasion into the wound gaps and deposition of extracellular matrix fibers, which may guide anastomosis and vascular integration of the graft during wound healing. The construct successfully anastomosed in vivo, forming chimeric vessels of human and rat cells. Overall, our flap replacement has high potential for treating lymphedema. Full article

Arterial stenosis or blockage is the leading cause of cardiovascular disease, and the common solution is to substitute the arteries by autologous veins or bypass the blood vessels physically. With the development of science and technology, arteries with diameter larger than 6 mm can be substituted by unbiodegradable polymers, such as polytetrafluoroethylene, clinically. Nevertheless, the construction of a small-diameter (less than 6 mm) artery with living cells has always been a thorny problem. In this study, a suit of combined mold was designed and forged for constructing small-diameter arterial vessels. Based on this combined mold, bioactive arterial vessels containing adipose-derived stem cells (ASCs) and different growth factors (GFs) were assembled together to mimic the inner and middle layers of the natural arteries. Before assembling, ASCs and GFs were loaded into a gelatin/alginate hydrogel. To enhance the mechanical property of the bilayer arterial vessels, polylactic–glycolic acid (PLGA) was applied on the surface of the bilayer vessels to form the outer third layer. The biocompatibility, morphology and mechanical property of the constructed triple-layer arterial vessels were characterized. The morphological results manifested that cells grow well in the gelatin/alginate hydrogels, and ASCs were differentiated into endothelial cells (ECs) and smooth muscle cells (SMCs), respectively. In addition, under the action of shear stress produced by the flow of the culture medium, cells in the hydrogels with high density were connected to each other, similar to the natural vascular endothelial tissues (i.e., endothelia). Especially, the mechanical property of the triple-layer arterial vessels can well meet the anti-stress requirements as human blood vessels. In a word, a small-diameter arterial vessel was successfully constructed through the combined mold and has a promising application prospect as a clinical small-diameter vessel graft. Full article

Cardiovascular diseases, including coronary artery and peripheral vascular pathologies, are leading causes of mortality. As an alternative to autografts, prosthetic grafts have been developed to reduce the death rate. This study presents the development and characterization of bilayer vascular grafts with appropriate structural and biocompatibility properties. A polymer blend of recombinant human collagen (RHC) peptides and polycaprolactone (PCL) was used to build the inner layer of the graft by electrospinning and co-electrospinning the water-soluble polyethylene oxide (PEO) as sacrificial material together with PCL to generate the porous outer layer. The mechanical test demonstrated the bilayer scaffold’s appropriate mechanical properties as compared with the native vascular structure. Human umbilical vein endothelial cells (HUVEC) showed enhanced adhesion to the lumen after seeding on nanoscale fibers. Meanwhile, by enhancing the porosity of the microfibrous outer layer through the removal of PEO fibers, rat smooth muscle cells (A7r5) could proliferate and infiltrate the porous layer easily. Full article

Electrospinning is an innovative new fibre technology that aims to design and fabricate membranes suitable for a wide range of tissue engineering (TE) applications including vascular grafts, which is the main objective of this research work. This study dealt with fabricating and characterising bilayer structures comprised of an electrospun sheet made of polycaprolactone (PCL, inner layer) and an outer layer made of poly lactic-co-glycolic acid (PLGA) and a coaxial porous scaffold with a micrometre fibre structure was successfully produced. The membranes’ propriety for intended biomedical applications was assessed by evaluating their morphological structure/physical properties and structural integrity when they underwent the degradation process. A scanning electron microscope (SEM) was used to assess changes in the electrospun scaffolds’ structural morphology such as in their fibre diameter, pore size (μm) and the porosity of the scaffold surface which was measured with Image J software. During the 12-week degradation process at room temperature, most of the scaffolds showed a similar trend in their degradation rate except the 60 min scaffolds. The coaxial scaffold had significantly less mass loss than the bilayer PCL/PLGA scaffold with 1.348% and 18.3%, respectively. The mechanical properties of the fibrous membranes were measured and the coaxial scaffolds showed greater tensile strength and elongation at break (%) compared to the bilayer scaffolds. According to the results obtained in this study, it can be concluded that a scaffold made with a coaxial needle is more suitable for tissue engineering applications due to the improved quality and functionality of the resulting polymeric membrane compared to the basic electrospinning process. However, whilst fabricating a vascular graft is the main aim of this research work, the biological data will not present in this paper. Full article

The loss of skin integrity has always represented a major challenge for clinicians dealing with dermal defects, such as ulcers (diabetic, vascular and chronic), postoncologic resections (i.e., radical vulvectomy) or dermatologic disorders. The introduction in recent decades of acellular dermal matrices (ADMs) supporting the repair and restoration of skin functionality represented a significant step toward achieving clean wound repair before performing skin grafts. Hard-to-heal ulcers generally depend on local ischemia and nonadequate vascularization. In this context, one possible innovative approach could be the prevascularization of matrices with vessel-forming cells (inosculation). This paper presents a comparative analysis of the most widely used dermal templates, i.e., Integra^® Bilayer Matrix Wound Dressing, PELNAC^®, PriMatrix^® Dermal Repair Scaffold, Endoform^® Natural Dermal Template, and Myriad Matrix^®, testing their ability to be colonized by human adult dermal microvascular endothelial cells (ADMECs) and to induce and support angiogenesis in vitro and in vivo. By in vitro studies, we demonstrated that Integra^® and PELNAC^® possess superior pro-adhesive and pro-angiogenetic properties. Animal models allowed us to demonstrate the ability of preseeded ADMECs on Integra^® to promote the engraftment, integration and vascularization of ADMs at the site of application. Full article

To enhance the hemocompatibility of silk fibroin fabric as biomedical material, polyelectrolytes architectures have been assembled through the layer-by-layer (LbL) technique on silk fibroin fabric (SFF). In particular, 1.5 and 2.5 bilayer of oppositely charged polyelectrolytes were assembled onto SFF using poly(allylamine hydrochloride) (PAH) as polycationic polymer and poly(acrylic acid) (PAA) as polyanionic polymer with PAH topmost. Low molecular weight heparin (LMWH) activated with 1-ethyl-3-(dimethylaminopropyl) carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) was then immobilized on its surface. Alcian Blue staining, toluidine blue assay and X-ray photoelectron spectroscopy (XPS) confirmed the presence of heparin on modified SFF surfaces. The surface morphology of the modified silk fibroin fabric surfaces was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM), and obtained increased roughness. Negligible hemolytic effect and a higher concentration of free hemoglobin by a kinetic clotting time test ensured the improved biological performance of the modified fibroin fabric. Overall, the deposition of 2.5 bilayer was found effective in terms of biological and surface properties of the modified fibroin fabric compared to 1.5 bilayer self-assembly technique. Therefore, this novel approach to surface modification may demonstrate long term patency in future in vivo animal trials of small diameter silk fibroin vascular grafts. Full article