Search Results (7)

Tailings generated by mining account for the largest world-wide waste from industrial activities. As an element, copper is relatively uncommon, with low concentrations in sediments and waters, yet is very elevated around mining operations. On the Keweenaw Peninsula of Michigan, USA, jutting out into Lake Superior, 140 mines extracted native copper from the Portage Lake Volcanic Series, part of an intercontinental rift system. Between 1901 and 1932, two mills at Gay (Mohawk, Wolverine) sluiced 22.7 million metric tonnes (MMT) of copper-rich tailings (stamp sands) into Grand (Big) Traverse Bay. About 10 MMT formed a beach that has migrated 7 km from the original Gay pile to the Traverse River Seawall. Another 11 MMT are moving underwater along the coastal shelf, threatening Buffalo Reef, an important lake trout and whitefish breeding ground. Here we use remote sensing techniques to document geospatial environmental impacts and initial phases of remediation. Aerial photos, multiple ALS (crewed aeroplane) LiDAR/MSS surveys, and recent UAS (uncrewed aircraft system) overflights aid comprehensive mapping efforts. Because natural beach quartz and basalt stamp sands are silicates of similar size and density, percentage stamp sand determinations utilise microscopic procedures. Studies show that stamp sand beaches contrast greatly with natural sand beaches in physical, chemical, and biological characteristics. Dispersed stamp sand particles retain copper, and release toxic levels of dissolved concentrations. Moreover, copper leaching is elevated by exposure to high DOC and low pH waters, characteristic of riparian environments. Lab and field toxicity experiments, plus benthic sampling, all confirm serious impacts of tailings on aquatic organisms, supporting stamp sand removal. Not only should mining companies end coastal discharges, we advocate that they should adopt the UNEP “Global Tailings Management Standard for the Mining Industry”. Full article

Over a century ago, copper mills on the Keweenaw Peninsula of Lake Superior sluiced 64 million metric tonnes (MMT) of tailings into coastal waters, creating a metal-rich “halo”. Here we show that relatively small discharges can spread widely in time and space. Mass Mill (2.9 MMT) dumping into Lake Superior also illustrates the complexity of interactions with Indigenous Peoples. A combination of aerial photos, LiDAR, and a microscope technique for distinguishing end-member particles traces the migration of tailings. The clay fraction spread rapidly across Keweenaw Bay and curled into terminal L’Anse Bay, within tribal Reservation boundaries. The coarse stamp sand fraction moved more slowly southward as a beach sand deposit onto Sand Point, a sacred burial ground. Despite the partial recovery of northern beaches and southern sediments, concerns continue about chemical contamination. Mass Mill provides an excellent example of Indigenous Peoples’ territorial and resource issues with mining. A major difficulty with “legacy” discharges is that there are no longer any “responsible parties”. Initially, federal and state officials were fearful that treaty rights might warrant reparations. Recently, multiple agency/state funding programs supported international (IJC) award-winning restoration efforts by tribal members, illustrating how Indigenous Peoples and governments can work together to safeguard treaty rights. Full article

Northern wild rice is of great dietary and cultural importance to the Native American population in the Upper Peninsula of Michigan. Millions of tons of mine tailings were discharged into Lake Superior and other inland lakes during the copper mining boom in the early 20th century in this area. This includes L’Anse Bay, located within the Keweenaw Bay Indian Community (KBIC) reservation. Since wild rice restoration is being encouraged by the KBIC, we investigated the distribution of toxic metals in sediments, water, and wild rice and their potential impact on human health from two locations. Sand Point sloughs on L’Anse Bay and a nearby inland lake, Lake Plumbago, were sampled for sediment, water, and wild rice, and the potential human health risk from dietary exposure to toxic metals in wild rice was assessed. Arsenic stood out as the element that had the highest bioaccumulation at both locations. Risk calculations showed that the hazard index (HI) value for wild rice seeds from both sites was high. Data indicate both carcinogenic and non-carcinogenic risks for As from wild rice in Sand Point sloughs and Lake Plumbago, and carcinogenic risks for Cd and Cr at Lake Plumbago. Full article

On the Keweenaw Peninsula of Lake Superior, two stamp mills (Mohawk and Wolverine) discharged 22.7 million metric tonnes (MMT) of tailings (1901–1932) into the coastal zone off the town of Gay. Migrating along the shoreline, ca. 10 MMT of the tailings dammed stream and river outlets, encroached upon wetlands, and contaminated recreational beaches. A nearly equal amount of tailings moved across bay benthic environments into critical commercial fish spawning and rearing grounds. In the middle of the bay, Buffalo Reef is important for commercial and recreational lake trout and lake whitefish production (ca. 32% of the commercial catch in Keweenaw Bay, 22% along southern Lake Superior). Aerial photographs (1938–2016) and five LiDAR and multispectral over-flights (2008–2016) emphasize: (1) the enormous amounts of tailings moving along the beach; and (2) the bathymetric complexities of an equal amount migrating underwater across the shelf. However, remote sensing studies encounter numerous specific challenges in coastal environments. Here, we utilize a combination of elevation data (LiDAR digital elevation/bathymetry models) and in situ studies to generate a series of physical, chemical, and biological geospatial maps. The maps are designed to help assess the impacts of historical mining on Buffalo Reef. Underwater, sand mixtures have complicated multispectral bottom reflectance substrate classifications. An alternative approach, in situ simple particle classification, keying off distinct sand end members: (1) allows calculation of tailings (stamp sand) percentages; (2) aids indirect and direct assays of copper concentrations; and (3) permits determinations of density effects on benthic macro-invertebrates. The geospatial mapping shows how tailings are moving onto Buffalo Reef, the copper concentrations associated with the tailings, and how both strongly influence the density of benthic communities, providing an excellent example for the International Maritime Organization on how mining may influence coastal reefs. We demonstrate that when large amounts of mine tailings are discharged into coastal environments, temporal and spatial impacts are progressive, and strongly influence resident organisms. Next steps are to utilize a combination of hi-resolution LiDAR and sonar surveys, a fish-monitoring array, and neural network analysis to characterize the geometry of cobble fields where fish are successful or unsuccessful at producing young. Full article

Where light penetration is excellent, the combination of LiDAR (Light Detection And Ranging) and passive bottom reflectance (multispectral, hyperspectral) greatly aids environmental studies. Over a century ago, two stamp mills (Mohawk and Wolverine) released 22.7 million metric tons of copper-rich tailings into Grand Traverse Bay (Lake Superior). The tailings are crushed basalt, with low albedo and spectral signatures different from natural bedrock (Jacobsville Sandstone) and bedrock-derived quartz sands. Multiple Lidar (CHARTS and CZMIL) over-flights between 2008–2016—complemented by ground-truth (Ponar sediment sampling, ROV photography) and passive bottom reflectance studies (3-band NAIP; 13-band Sentinal-2 orbital satellite; 48 and 288-band CASI)—clarified shoreline and underwater details of tailings migrations. Underwater, the tailings are moving onto Buffalo Reef, a major breeding site important for commercial and recreational lake trout and lake whitefish production (32% of the commercial catch in Keweenaw Bay, 22% in southern Lake Superior). If nothing is done, LiDAR-assisted hydrodynamic modeling predicts 60% tailings cover of Buffalo Reef within 10 years. Bottom reflectance studies confirmed stamp sand encroachment into cobble beds in shallow (0-5m) water but had difficulties in deeper waters (>8 m). Two substrate end-members (sand particles) showed extensive mixing but were handled by CASI hyperspectral imaging. Bottom reflectance studies suggested 25-35% tailings cover of Buffalo Reef, comparable to estimates from independent counts of mixed sand particles (ca. 35% cover of Buffalo Reef by >20% stamp sand mixtures). Full article

In 2018, the National Aeronautics and Space Administration (NASA) is scheduled to launch the Ice, Cloud, and land Elevation Satellite-2 (ICESat-2), with a new six-beam, green-wavelength, photon-counting lidar system, Advanced Topographic Laser Altimeter System (ATLAS). The primary objectives of the ICESat-2 mission are to measure ice-sheet elevations, sea-ice thickness, and global biomass. However, if bathymetry can be reliably retrieved from ATLAS data, this could assist in addressing a key data need in many coastal and inland water body areas, including areas that are poorly-mapped and/or difficult to access. Additionally, ATLAS-derived bathymetry could be used to constrain bathymetry derived from complementary data, such as passive, multispectral imagery and synthetic aperture radar (SAR). As an important first step in evaluating the ability to map bathymetry from ATLAS, this study involves a detailed assessment of bathymetry from the Multiple Altimeter Beam Experimental Lidar (MABEL), NASA’s airborne ICESat-2 simulator, flown on the Earth Resources 2 (ER-2) high-altitude aircraft. An interactive, web interface, MABEL Viewer, was developed and used to identify bottom returns in Keweenaw Bay, Lake Superior. After applying corrections for refraction and channel-specific elevation biases, MABEL bathymetry was compared against National Oceanic and Atmospheric Administration (NOAA) data acquired two years earlier. The results indicate that MABEL reliably detected bathymetry in depths of up to 8 m, with a root mean square (RMS) difference of 0.7 m, with respect to the reference data. Additionally, a version of the lidar equation was developed for predicting bottom-return signal levels in MABEL and tested using the Keweenaw Bay data. Future work will entail extending these results to ATLAS, as the technical specifications of the sensor become available. Full article

There are numerous examples of past and present mine disposal into freshwater and marine coastal bays and riverine environments. Due to its high spatial resolution and extended water penetration, coastal light detection and ranging (LiDAR), coupled with multispectral scanning (MSS), has great promise for resolving disturbed shoreline features in low turbidity environments. Migrating mine tailings present serious issues for Lake Superior and coastal marine environments. Previous investigations in Lake Superior uncovered a metal-rich “halo” around the Keweenaw Peninsula, related to past copper mining practices. For over a century, waste rock migrating from shoreline tailing piles has moved along extensive stretches of coastline, compromising critical fish breeding grounds, damming stream outlets, transgressing into wetlands and along recreational beaches and suppressing benthic invertebrate communities. In Grand (Big) Traverse Bay, Buffalo Reef is an important spawning area for lake trout and whitefish threatened by drifting tailings. The movement of tailings into Buffalo Reef cobble fields may interfere with the hatching of fish eggs and fry survival, either by filling in crevices where eggs are deposited or by toxic effects on eggs, newly hatched larvae or benthic communities. Here, we show that the coastal tailing migration is not “out of sight, out of mind”, but clearly revealed by using a combination of LiDAR and MSS techniques. Full article