Search Results (3)

Annual energy consumption has surged due to suboptimal energy efficiency, resulting in an electricity supply shortage in Sulaimani, an Iraqi city in a temperate climate zone. This mixed-methods study aims to optimise energy efficiency in Sulaimani’s office buildings using IDA Indoor Climate and Energy (IDA ICE) dynamic simulation software v4.8. First, we collected data and developed 204 scenarios based on three prevalent plan typologies, linear (T₁), concentric (T₂), and courtyard (T₃), utilising common materials such as Alucobond (M₁), cement plaster (M₂), Styropor (M₃), and a curtain wall (M₄). Afterwards, we performed relevant analyses employing External Venetian Blinds (EVBs) to reduce cooling load and/or Expanded Polystyrene (EPS) to reduce heating load. Notably, the results proved that EPS was more effective than EVBs in reducing both heating and cooling loads in the temperate climate zone, achieving reductions of up to 38% for T₁. Meanwhile, EPS contributed to a heating load reduction of up to 52% for T₃, and this adversely impacted overall energy consumption. Both EVBs and EPS could reduce total energy consumption by up to 30% in T₂. In conclusion, the total energy consumption increased in temperate climate zones when EVBs were utilised, but this effect varied based on the various typologies of office buildings. Full article

In its simplest terms, a closed-cavity façade (CCF) is a sealed, unventilated enclosure equipped with motorized shading devices, internal double or triple glazing, and external single glazing. This technology effectively controls solar energy and daylight entry into buildings. This research aims to enhance the thermal efficiency of CCFs in tropical climates using Venetian blinds (VB) and advanced glass coatings. EnergyPlus and DesignBuilder were employed to assess various CCF designs and compare them to a single glazing unit (SGU) with grey coatings. This was inspired by a residential case study on Penang Island, Malaysia. The findings indicate that CCFs surpass SGUs in thermal performance and occupant comfort, particularly in Malaysia’s humid tropical climate. CCFs reduced operating temperatures by a monthly percentage ranging from 33.5% to 68.75% in all operations. On an annual basis, temperature reductions ranged from 27.5% to 80.25%, with maximum decreases between 2 °C and 4 °C and minimum decreases between 0.5 °C and 1 °C compared to SGU units. The results show that CCFs outperform SGUs in thermal performance and comfort, reducing operating temperatures by 33.5% to 68.75% monthly and 27.5% to 80.25% annually. Temperature reductions ranged between 2 °C and 4 °C at maximum and 0.5 °C and 1 °C at minimum compared to SGU. Notably, Venetian blinds with nano-coatings (83/58) and low-E coatings (83/23) (T_vis/T_sol) were the most effective. This study highlights the importance of selecting appropriate coatings for CCFs, and demonstrates their potential in enhancing interior temperatures and comfort in Malaysia’s climate. The findings emphasize the significant impact of innovative glazing technologies on improving operational temperatures and occupant comfort using closed-cavity façades in the tropics. Full article

Improving the energy efficiency of buildings is among the most urgent social development tasks due to the scale of energy consumption in this industry. At the same time, it is essential to meet high requirements for indoor environmental quality and thermal comfort. The issue of overheating is most often analysed in summer but it also occurs in transition seasons, when the cooling systems do not operate. The paper attempts to evaluate the effectiveness of external mobile shading elements on the microclimate of rooms with large glazed areas in the transition season. Passive solutions, such as shading elements, which limit the increase of indoor temperature, do not always allow the acquisition and maintenance of comfortable solutions for the duration of the season, as demonstrated by the authors. Temporary cooling of the rooms may be necessary to maintain comfortable conditions for the users, or other solutions should be devised to improve comfort (e.g., reduction of clothing insulation characteristics). The novelty of the study consists in the analysis of comfort in a “nearly zero energy consumption” building (NZEB) during a period not analyzed by other scientists. This is a transition period during which heating/cooling systems do not operate. The research task set by the authors involved the assessment of the possibility to reduce office space overheating in the transition season (spring) by using external shading equipment in rooms with large glazed areas. An additional research task aimed at checking the extent to which user behaviour, such as reduction in clothing insulation characteristics, can improve comfort in overheated rooms. The results of the tests reveal that the difference in the ambient air temperature between a room with external venetian blinds and an identical room with no venetian blinds in the transition season, i.e., from 27 March to 6 April 2017, ranged from 12.3 to 2.1 °C. The use of a shading system (external venetian blinds positioned at an angle of 45°) reduced the number of discomfort hours by 92% (during working hours) compared to the room without external venetian blinds. A reduction in the thermal insulation of the clothes worn by people working in the room with no venetian blinds helped to reduce the number of discomfort hours by 31%. Full article