Search Results (9)

Winter, snow, and mountains, epitomized by the world-renowned Rocky Mountain range, are an integral part of Canada’s sport-culture identity and international tourism brand, yet the climate change risk posed to this important ski tourism region remains uncertain. This study used the ski operations model SkiSim 2.0 to analyze the climate risk for the region’s ski industry (26 ski areas in the province of Alberta and 40 in British Columbia) with advanced snowmaking, including changes in key performance metrics of ski season length, snowmaking requirements, holiday operations, and lift and terrain capacity. If Paris Climate Agreement targets are met, average seasons across all ski areas decline 14–18% by mid-century, while required snowmaking increases 108–161%. Regional average operational terrain declined only 4–9% in mid-century, as the largest ski areas were generally more climate resilient. More pronounced impacts are projected under late-century, high-emission scenarios and in low latitudes and coastal British Columbia regions. When compared with continental and international ski tourism markets, Western Canada has relatively lower climate change impacts, which could improve its competitiveness. The results inform further research on demand-side as well as the winter sport-tourism industry and destination-scale climate change adaptation and mitigation strategies. Full article

This paper describes the first phase of a Coast Salish Knowledge Repatriation Project being coordinated by the Curator of Indigenous Collections and Engagement at the Museum of Vancouver, within the unceded, ancestral territories of the xʷməθkʷəýəm (Musqueam), Sḵwx̱wú7mesh (Squamish), and səlilwətaɬ (Tsleil-Waututh) nations. The goal of this knowledge repatriation work is to support cultural revitalization and language renewal through activities that generate learning opportunities for community members. These activities pivot around knowledge that has been lost due to urbanization, forced assimilation efforts, and other colonial activities that may have restricted access to traditional lands and resources, preventing knowledge transmission. This work is about shifting the focus from extractive projects, that benefit external audiences, to one that supports capacity building and cultural renewal within communities. This essay describes a project to reintroduce coiled cedar root basketry into communities within the Greater Vancouver area in the province of British Columbia, Canada. Full article

Risk prediction models for cancer stage at diagnosis may identify individuals at higher risk of late-stage cancer diagnoses. Partial proportional odds risk prediction models for cancer stage at diagnosis for males and females were developed using data from Alberta’s Tomorrow Project (ATP). Prediction models were validated on the British Columbia Generations Project (BCGP) cohort using discrimination and calibration measures. Among ATP males, older age at diagnosis was associated with an earlier stage at diagnosis, while full- or part-time employment, prostate-specific antigen testing, and former/current smoking were associated with a later stage at diagnosis. Among ATP females, mammogram and sigmoidoscopy or colonoscopy were associated with an earlier stage at diagnosis, while older age at diagnosis, number of pregnancies, and hysterectomy were associated with a later stage at diagnosis. On external validation, discrimination results were poor for both males and females while calibration results indicated that the models did not over- or under-fit to derivation data or over- or under-predict risk. Multiple factors associated with cancer stage at diagnosis were identified among ATP participants. While the prediction model calibration was acceptable, discrimination was poor when applied to BCGP data. Updating our models with additional predictors may help improve predictive performance. Full article

The WAC Bennett Dam was completed in 1968 and impounded the Upper Peace River to form the Williston Reservoir in north central British Columbia. In 1990, an enhancement project was initiated to stock Columbia River Kokanee (non-anadromous Sockeye Salmon; Oncorhynchus nerka) from southeastern British Columbia into tributary streams that drained into regions of the reservoir that were accessible by anglers. The current distribution of spawning Columbia-origin Kokanee in the Williston Reservoir watershed, however, does not reflect the locations where these fish were initially stocked and suggests extensive straying. Whether or not Kokanee will develop fidelity to specific spawning locations is not known, but it is important information to effectively manage these introduced fish. We used otolith microchemistry to estimate fidelity to natal streams by Columbia-origin Kokanee in the Williston Reservoir. Otolith elemental signatures for the region of the otolith that formed during the larval period and characterized the natal redd environment showed considerable variation among samples. Natal signatures tended to cluster for each river but not for all spawners, suggesting elemental signatures from other rivers. Homing to one of the four natal streams we examined was classified to be 73% based on linear discriminant analysis, although variation in the elemental signatures within each group suggests that homing by Kokanee to specific natal streams may be as low as 55%. Based on similarity of water elemental signatures for tributaries within large rivers, however, the proportion of fish that returned to their general region was likely higher and estimated to be approximately 83%. The result of regional homing could be reproductive isolation and adaptation to local conditions. It is unclear, however, if the current estimated level of straying will limit genetic differentiation and prevent local adaptation. Full article

Population-based cohort studies can be a resource for tumor specimens, annotated with demographic, lifestyle, and health history data, that support innovative studies of cancer. Our aim was to establish and test a process for accessing tumor samples, held at pathology laboratories around British Columbia (BC), for participants of the BC Generations Project (BCGP). Through the BC Cancer Registry, we identified pathology reports for 1100 (93%) of the 1180 incident solid cancer cases diagnosed in BCGP as of 2019. Using manually abstracted data from the reports, we successfully retrieved 183 (92%) of the 200 formalin-fixed, paraffin-embedded (FFPE) blocks (breast, lung, bladder, and pancreas cancer cases) that we requested from pathology laboratories. No important differences in retrieval rates by cancer site, sample location (Greater Vancouver vs. Outside Greater Vancouver), sample type (biopsy vs. excision) or year of diagnosis were identified. A text mining solution recently implemented by the Registry will allow us to automate the process for data abstraction and should capture pathology reports for 100% of all newly diagnosed BCGP cancer cases moving forward. This will further enhance the utility of BCGP as a high-quality tumor tissue research resource. Full article

The accuracy of data-driven predictive mineral prospectivity models relies heavily on the training datasets used. These models are usually trained using data for “known” deposit locations as well as “non-deposit” locations that are based on randomly generated point patterns. In this study, data related to the Seabridge Gold Inc Iskut project, an epithermal Au deposit in northwestern British Columbia (BC), Canada, are used to test the utility of data-driven mineral prospectivity modeling. The input spatial dataset is comprised mostly of publicly available data. Data for 18 vein and epithermal Au known mineral occurrences (KMO) are obtained from the BC Geological Survey’s MINFILE repository and selected as training deposit locations. A total of eleven sets of non-deposit locations (NDL) were also created, including one set of selected non-prospective KMO for Au deposits from the MINFILE and ten sets of random point patterns. Given the scale of this study, most of the KMO recorded on the property are of the epithermal deposit type. Hence, they could not be used as a selection criterion. Data-driven mineral potential models are generated using the random forest (RF) algorithm and trained on multiple data sets. The comparison of RF models demonstrated that using non-prospective KMO generates more accurate predictions than the random point pattern. The produced mineral prospectivity maps delineated multiple areas with higher discovery potential, which matched viable targets for the Au-Cu epithermal-porphyry system identified through previous Seabridge Gold Inc. (Toronto, ON, Canada) field reconnaissance and drilling programs. Full article

Key to the quantification of rockfall hazard is an understanding of its magnitude-frequency behaviour. Remote sensing has allowed for the accurate observation of rockfall activity, with methods being developed for digitally assembling the monitored occurrences into a rockfall database. A prevalent challenge is the quantification of rockfall volume, whilst fully considering the 3D information stored in each of the extracted rockfall point clouds. Surface reconstruction is utilized to construct a 3D digital surface representation, allowing for an estimation of the volume of space that a point cloud occupies. Given various point cloud imperfections, it is difficult for methods to generate digital surface representations of rockfall with detailed geometry and correct topology. In this study, we tested four different computational geometry-based surface reconstruction methods on a database comprised of 3668 rockfalls. The database was derived from a 5-year LiDAR monitoring campaign of an active rock slope in interior British Columbia, Canada. Each method resulted in a different magnitude-frequency distribution of rockfall. The implications of 3D volume estimation were demonstrated utilizing surface mesh visualization, cumulative magnitude-frequency plots, power-law fitting, and projected annual frequencies of rockfall occurrence. The 3D volume estimation methods caused a notable shift in the magnitude-frequency relations, while the power-law scaling parameters remained relatively similar. We determined that the optimal 3D volume calculation approach is a hybrid methodology comprised of the Power Crust reconstruction and the Alpha Solid reconstruction. The Alpha Solid approach is to be used on small-scale point clouds, characterized with high curvatures relative to their sampling density, which challenge the Power Crust sampling assumptions. Full article

Any group that creates challenging goals also requires a strategy to achieve them and a process to review and improve this strategy over time. The University of British Columbia (UBC) set ambitious campus sustainability goals, including a reduction in its greenhouse gas emissions to 33% below the 2007 level by 2015, and 100% by 2050 (UBC, 2006). The University pursued these goals through a number of specific projects (such as major district energy upgrade and a bioenergy facility) and, more generally, through a “Campus as a Living Lab” (CLL) initiative to marry industry, campus operations, and research to drive innovative solutions. The CLL program has achieved significant successes while also demonstrating many opportunities for improvements and lessons learned. The aim of this study was to examine the UBC CLL program, to identify and formalize its operations, to extract key transferable characteristics, and to propose replicable processes that other universities and municipalities can follow to expand their sustainable practices in similar ways. There was a learning curve with implementing a CLL program at UBC; thus, the goal of this study was to potentially shorten this learning curve for others. The research involved an ethnographic approach in which researchers participated in the CLL process, conducted qualitative analysis, and captured the processes through a series of business process models. The research findings are shared in two parts: 1. generalized lessons learned through key transferrable characteristics; 2. a series of generic organizational charts and business process models (BPMs) culminated with learned strategies through defined processes that illustrate what was required to create a CLL program at UBC. A generalized future improvement plan for UBC CLL programs is defined, generic BPMs about CLL projects are evaluated, and the level of engagement of multiple stakeholders through phases of project life cycle given in the conclusion for future use of other Living Lab organizations. Full article

Access to justice has become an important issue in many justice systems around the world. Increasingly, technology is seen as a potential facilitator of access to justice, particularly in terms of improving justice sector efficiency. The international diffusion of information systems (IS) within the justice sector raises the important question of how to insure quality performance. The IS literature has stressed a set of general design principles for the implementation of complex information technology systems that have also been applied to these systems in the justice sector. However, an emerging e-justice literature emphasizes the significance of unique law and technology concerns that are especially relevant to implementing and evaluating information technology systems in the justice sector specifically. Moreover, there is growing recognition that both principles relating to the design of information technology systems themselves (“system design principles”), as well as to designing and managing the processes by which systems are created and implemented (“design management principles”) can be critical to positive outcomes. This paper uses six e-justice system examples to illustrate and elaborate upon the system design and design management principles in a manner intended to assist an interdisciplinary legal audience to better understand how these principles might impact upon a system’s ability to improve access to justice: three European examples (Italian Trial Online; English and Welsh Money Claim Online; the trans-border European Union e-CODEX) and three Canadian examples (Ontario’s Integrated Justice Project (IJP), Ontario’s Court Information Management System (CIMS), and British Columbia’s eCourt project). Full article