Search Results (47)

Copper-thiolate nanostructures, formed through the self-assembly of cysteine (Cys) and glutathione (GSH) with copper ions, offer a versatile platform for redox-active applications due to their structural stability and chemical functionality. In this study, Cu-Cys-GSH nanoparticles were synthesized and employed to develop a capacitive biosensor for the ultralow concentration detection of hydrogen peroxide (H₂O₂). The detection mechanism leverages a Fenton-like reaction, where H₂O₂ interacts with Cu-Cys-GSH nanoparticles to generate hydroxyl radicals (·OH) through redox cycling between Cu²⁺ and Cu⁺ ions. These redox processes induce changes in the sensor’s surface charge and dielectric properties, enabling highly sensitive capacitive sensing at gold interdigitated electrodes (IDEs). The influence of chirality on sensing performance was investigated by synthesizing nanoparticles with both L- and D-cysteine enantiomers. Comparative analysis revealed that the stereochemistry of cysteine impacts the catalytic activity and sensor response, with Cu-L-Cys-GSH nanoparticles exhibiting superior performance. Specifically, the biosensor achieved a linear detection range from 1.0 fM to 1.0 pM and demonstrated an ultra-sensitive detection limit of 21.8 aM, outperforming many existing methods for H₂O₂ detection. The sensor’s practical performance was further validated using milk and saliva samples, yielding high recovery rates and confirming its robustness and accuracy for real-world applications. This study offers a disposable, low-cost sensing platform compatible with sustainable healthcare practices and facilitates easy integration into point-of-care diagnostic systems. Full article

Perfluorooctanoic acid (PFOA) is one of the most persistent and bioaccumulative water contaminants. Sensitive, rapid, and in-field analysis is needed to ensure safe water supplies. Here, we present a single step (one shot) and rapid sensor capable of measuring PFOA at the sub-quadrillion (ppq) level, 4.5 × 10⁻⁴ ppq, within 10 s. This innovative sensor employs a synergistic combination of a molecularly imprinted polymer (MIP)-modified gold interdigitated microelectrode chip and AC electrothermal effects (ACETs), which enhance detection sensitivity by facilitating the accelerated movement of PFOA molecules towards specific recognition sites on the sensing surface. The application of a predetermined AC signal induces microfluidic enrichment and results in concentration-dependent changes in interfacial capacitance during the binding process. This enables real-time, rapid quantification with exceptional sensitivity. We achieved a linear dynamic range spanning from 0.4 to 40 fg/L (4 × 10⁻⁷–4 × 10⁻⁵ ppt) and demonstrated good selectivity (~1:100) against other PFAS compounds, including perfluorooctanoic acid (PFOS), in PBS buffer. The sensor’s straightforward operation, cost-effectiveness, elimination of the need for external redox probes, compact design, and functionality in relatively resistant environmental matrices position it as an outstanding candidate for deployment in practical applications. Full article

Cellular heterogeneity plays a significant role in understanding biological processes, such as cell cycle and disease progression. Microfluidics has emerged as a versatile tool for manipulating single cells and analyzing their heterogeneity with the merits of precise fluid control, small sample consumption, easy integration, and high throughput. Specifically, integrating microfluidics with electrical techniques provides a rapid, label-free, and non-invasive way to investigate cellular heterogeneity at the single-cell level. Here, we review the recent development of microfluidic-based electrical strategies for single-cell manipulation and analysis, including dielectrophoresis- and electroporation-based single-cell manipulation, impedance- and AC electrokinetic-based methods, and electrochemical-based single-cell detection methods. Finally, the challenges and future perspectives of the microfluidic-based electrical techniques for single-cell analysis are proposed. Full article

Electrokinetic (EK) microsystems, which are capable of performing separations without the need for labeling analytes, are a rapidly growing area in microfluidics. The present work demonstrated three distinct binary microbial separations, computationally modeled and experimentally performed, in an insulator-based EK (iEK) system stimulated by DC-biased AC potentials. The separations had an increasing order of difficulty. First, a separation between cells of two distinct domains (Escherichia coli and Saccharomyces cerevisiae) was demonstrated. The second separation was for cells from the same domain but different species (Bacillus subtilis and Bacillus cereus). The last separation included cells from two closely related microbial strains of the same domain and the same species (two distinct S. cerevisiae strains). For each separation, a novel computational model, employing a continuous spatial and temporal function for predicting the particle velocity, was used to predict the retention time ($t_{R,p}$) of each cell type, which aided the experimentation. All three cases resulted in separation resolution values $R_s>1.5,$ indicating complete separation between the two cell species, with good reproducibility between the experimental repetitions (deviations < 6%) and good agreement (deviations < 18%) between the predicted $t_{R,p}$ and experimental ($t_{R,e}$) retention time values. This study demonstrated the potential of DC-biased AC iEK systems for performing challenging microbial separations. Full article

Circulating tumor DNA (ctDNA) appears as a valuable liquid biopsy biomarker in the early diagnosis, treatment, and prognosis of cancer. Here, a biosensing method derived from the AC electrokinetics (ACEK) effect was constructed in this study for the simple, efficient, and rapid method of detection of ctDNA. In the proof-of-concept experiment, ctDNA from the PIK3CA E542K mutant in breast cancer was quantified by detecting a normalized capacitance change rate using a forked-finger gold electrode as the sensing electrode in combination with the ACEK effect. We compared two formats for the construction of the approach by employing varied immobilization strategies; one is to immobilize the DNA capture probe on the electrode surface by Au–S bonding, while the other immobilizes the probe on a self-assembled membrane on the electrode surface by amide bonding. Both formats demonstrated ultrafast detection speed by completing the ctDNA quantification within 1 min and a linear range of 10 fM–10 pM was observed. Meanwhile, the immobilization via the self-assembled membrane yielded improved stability, sensitivity, and specificity than its Au–S bonding counterpart. A detection limit of 1.94 fM was eventually achieved using the optimized approach. This research provides a label-free and minute-scale universal method for the detection of various malignant tumors. The ctDNA biosensors based on the ACEK effect improved according to the probe type or electrode structure and have potential applications in tumor drug efficacy prediction, drug resistance monitoring, screening of high-risk groups, differential diagnosis, monitoring of tiny residual lesions, and prognosis determination. Full article

There is a rising need for rapid and reliable analytical methods for separating microorganisms in clinical and biomedical applications. Microscale-insulator-based electrokinetic (iEK) systems have proven to be robust platforms for assessing a wide variety of microorganisms. Traditionally, iEK systems are usually stimulated with direct-current (DC) potentials. This work presents a comparison between using DC potentials and using DC-biased alternating-current (AC) potentials in iEK systems for the separation of microorganisms. The present study, which includes mathematical modeling and experimentation, compares the separation of bacterial and yeast cells in two distinct modes by using DC and DC-biased AC potentials. The quality of both separations, assessed in terms of separation resolution ($R_s$), showed a complete separation ($R_s$ = 1.51) with the application of a DC-biased low-frequency AC signal but an incomplete separation ($R_s$ = 0.55) with the application of an RMS-equivalent DC signal. Good reproducibility between experimental repetitions (<10%) was obtained, and good agreement (~18% deviation) was observed between modeling and experimental retention times. The present study demonstrates the potential of extending the limits of iEK systems by employing DC-biased AC potentials to perform discriminatory separations of microorganisms that are difficult to separate with the application of DC potentials. Full article

The separation of rare cells from complex biofluids has attracted attention in biological research and clinical applications, especially for cancer detection and treatment. In particular, various technologies and methods have been developed for the isolation of circulating tumor cells (CTCs) in the blood. Among them, the induced-charge electrokinetic (ICEK) flow method has shown its high efficacy for cell manipulation where micro-vortices (MVs), generated as a result of induced charges on a polarizable surface, can effectively manipulate particles and cells in complex fluids. While the majority of MVs have been induced by AC electric fields, these vortices have also been observed under a DC electric field generated around a polarizable hurdle. In the present numerical work, the capability of MVs for the manipulation of CTCs and their entrapment in the DC electric field is investigated. First, the numerical results are verified against the available data in the literature. Then, various hurdle geometries are employed to find the most effective geometry for MV-based particle entrapment. The effects of electric field strength (EFS), wall zeta potential magnitude, and the particles’ diameter on the trapping efficacy are further investigated. The results demonstrated that the MVs generated around only the rectangular hurdle are capable of trapping particles as large as the size of CTCs. An EFS of about 75 V/cm was shown to be effective for the entrapment of above 90% of CTCs in the MVs. In addition, an EFS of 85 V/cm demonstrated a capability for isolating particles larger than 8 µm from a suspension of particles/cells 1–25 µm in diameter, useful for the enrichment of cancer cells and potentially for the real-time and non-invasive monitoring of drug effectiveness on circulating cancer cells in blood circulation. Full article

In two previous papers, we calculated the dielectrophoresis (DEP) force and corresponding trajectories of high- and low-conductance 200-µm 2D spheres in a square 1 × 1-mm chamber with plane-versus-pointed, plane-versus-plane and pointed-versus-pointed electrode configurations by applying the law of maximum entropy production (LMEP) to the system. Here, we complete these considerations for configurations with four-pointed electrodes centered on the chamber edges. The four electrodes were operated in either object-shift mode (two adjacent electrodes opposite the other two adjacent electrodes), DEP mode (one electrode versus the other three electrodes), or field-cage mode (two electrodes on opposite edges versus the two electrodes on the other two opposite edges). As in previous work, we have assumed DC properties for the object and the external media for simplicity. Nevertheless, every possible polarization ratio of the two media can be modeled this way. The trajectories of the spherical centers and the corresponding DEP forces were calculated from the gradients of the system’s total energy dissipation, described by numerically-derived conductance fields. In each of the three drive modes, very high attractive and repulsive forces were found in front of pointed electrodes for the high and low-conductance spheres, respectively. The conductance fields predict bifurcation points, watersheds, and trajectories with multiple endpoints. The high and low-conductance spheres usually follow similar trajectories, albeit with reversed orientations. In DEP drive mode, the four-point electrode chamber provides a similar area for DEP measurements as the classical plane-versus-pointed electrode chamber. Full article

Dielectrophoresis (DEP), a precision nonlinear electrokinetic tool utilized within microfluidic devices, can induce bioparticle polarization that manifests as motion in the electric field; this phenomenon has been leveraged for phenotypic cellular and biomolecular detection, making DEP invaluable for diagnostic applications. As device operation times lengthen, reproducibility and precision decrease, which has been postulated to be caused by ion gradients within the supporting electrolyte medium. This research focuses on characterizing pH gradients above, at, and below the electrode charging frequency (0.2–1.4 times charging frequency) in an aqueous electrolyte solution in order to extend the parameter space for which microdevice-imposed artifacts on cells in clinical diagnostic devices have been characterized. The nonlinear alternating current (AC) electric fields (0.07 V_pp/μm) required for DEP were generated via planar T-shaped and star-shaped microelectrodes overlaid by a 70 μm high microfluidic chamber. The experiments were designed to quantify pH changes temporally and spatially in the two microelectrode geometries. In parallel, a 50 nm hafnium oxide (HfO₂) thin film on the microelectrodes was tested to provide insights into the role of Faradaic surface reactions on the pH. Electric field simulations were conducted to provide insights into the gradient shape within the microelectrode geometries. Frequency dependence was also examined to ascertain ion electromigration effects above, at, and below the electrode charging frequency. The results revealed Faradaic reactions above, at, and below the electrode charging frequency. Comparison experiments further demonstrated that pH changes caused by Faradaic reactions increased inversely with frequency and were more pronounced in the star-shaped geometry. Finally, HfO₂ films demonstrated frequency-dependent properties, impeding Faradaic reactions. Full article

Electrothermal micropumps apply an AC electric field to a conductive fluid within the range of 10 kHz–1 MHz to generate fluid flow. In this frequency range, coulombic forces dominate fluid interactions over opposing dielectric forces, resulting in high flow rates (~50–100 μm/s). To date, the electrothermal effect—using asymmetrical electrodes—has been tested only with single-phase and 2-phase actuation, while dielectrophoretic micropumps have shown improved flow rates with 3- and 4-phase actuation. Simulating muti-phase signals in COMSOL Multiphysics requires additional modules and a more involved implementation to accurately represent the electrothermal effect in a micropump. Here, we report detailed simulations of the electrothermal effect under multi-phase conditions, including single-phase, 2-phase, 3-phase and 4-phase actuation patterns. These computational models indicate that 2-phase actuation leads to the highest flow rate, with 3-phase resulting in a 5% reduced flow rate and 4-phase resulting in an 11% reduced flow rate compared to 2-phase. With these modifications to the simulation, various actuation patterns can later be tested in COMSOL for a range of electrokinetic techniques. Full article

The DEP force is usually calculated from the object’s point of view using the interaction of the object’s induced dipole moment with the inducing field. Recently, we described the DEP behavior of high- and low-conductive 200-µm 2D spheres in a square 1 × 1-mm chamber with a plane-versus-pointed electrode configuration from the system’s point of view. Here we extend our previous considerations to the plane-versus-plane and pointed-versus-pointed electrode configurations. The trajectories of the sphere center and the corresponding DEP forces were calculated from the gradient of the system’s overall energy dissipation for given starting points. The dissipation’s dependence on the sphere’s position in the chamber is described by the numerical “conductance field”, which is the DC equivalent of the capacitive charge-work field. While the plane-versus-plane electrode configuration is field-gradient free without an object, the presence of the highly or low-conductive spheres generates structures in the conductance fields, which result in very similar DEP trajectories. For both electrode configurations, the model describes trajectories with multiple endpoints, watersheds, and saddle points, very high attractive and repulsive forces in front of pointed electrodes, and the effect of mirror charges. Because the model accounts for inhomogeneous objectpolarization by inhomogeneous external fields, the approach allows the modeling of the complicated interplay of attractive and repulsive forces near electrode surfaces and chamber edges. Non-reversible DEP forces or asymmetric magnitudes for the highly and low-conductive spheres in large areas of the chamber indicate the presence of higher-order moments, mirror charges, etc. Full article

Electrokinetic flow can be generated as a highly coupled phenomenon among velocity fields, electric conductivity fields, and electric fields. It can exhibit different responses to AC electric fields in different frequency regimes, according to different instability/receptivity mechanisms. In this investigation, by both flow visualization and single-point laser-induced fluorescence (LIF) method, the response of AC electrokinetic flow and the transition routes towards chaos and turbulence have been experimentally investigated. It is found, when the AC frequency $f_f>30$ Hz, the interface responds at both the neutral frequency of the basic flow and the AC frequency. However, when $f_f\ge 30$ Hz, the interface responds only at the neutral frequency of the basic flow. Both periodic doubling and subcritical bifurcations have been observed in the transition of AC electrokinetic flow. We hope the current investigation can promote our current understanding of the ultrafast transition process of electrokinetic flow from laminar state to turbulence. Full article

We consider the scattering of metal colloids in aqueous solutions by an insulating circular post under the action of an AC electric field. We analyze the effects on the particle of several forces of electrical origin: the repulsion between the induced dipole of the particle and its image dipole in the post, the hydrodynamic interaction with the post due to the induced-charge electroosmotic (ICEO) flow around the particle, and the dielectrophoresis arising from the distortion of the applied electric field around the post. The relative influence of these forces is discussed as a function of frequency of the AC field, particle size and distance to the post. We perform numerical simulations of the scattering of the metal colloid by the insulating circular post flowing in a microchannel and subjected to alternating current electric fields. Our simulation results show that the maximum particle deviation is found for an applied electric field parallel to the flow direction. The deviation is also greater at low electric field frequencies, corresponding to the regime in which the ICEO’s interaction with the post is predominant over other mechanisms. Full article

The rapid electrokinetic patterning (REP) technique has been demonstrated to enable dynamic particle manipulation in biomedical applications. Previous studies on REP have generally considered particles with a size less than 5 μm. In this study, a REP platform was used to manipulate polystyrene particles with a size of 3~11 μm in a microfluidic channel sandwiched between two ITO conductive glass plates. The effects of the synergy force produced by the REP electrothermal vortex on the particle motion were investigated numerically for fixed values of the laser power, AC driving voltage, and AC driving frequency, respectively. The simulation results showed that the particles were subject to a competition effect between the drag force produced by the toroidal vortex, which prompted the particles to recirculate in the bulk flow adjacent to the laser illumination spot on the lower electrode, and the trapping force produced by the particle and electrode interactions, which prompted the particles to aggregate in clusters on the surface of the illuminated spot. The experimental results showed that as the laser power increased, the toroidal flow range over which the particles circulated in the bulk flow increased, while the cluster range over which the particles were trapped on the electrode surface reduced. The results additionally showed that the particle velocity increased with an increasing laser power, particularly for particles with a smaller size. The excitation frequency at which the particles were trapped on the illuminated hot-spot reduced as the particle size increased. The force and velocity of polystyrene particles by the REP toroidal vortex has implications for further investigating the motion behavior at the biological cell level. Full article